HandHeld ALGIZ 7 User manual

ALGIZ 7
Quick Start Guide
handheld

Starting ALGIZ 7
Note: you will be asked to enter your Microsoft Windows license number that is located under the left battery.
Press and hold power button for 4 seconds to power on the unit. Follow the on-screen instructions to get started
with Windows. The screen calibration may not be accurate the rst time you start the computer. Follow the procedure
to calibrate the touchscreen.
Screen Calibration
1. Open Control Panel > Hardware and Sound > Tablet PC Settings
2. Click Calibrate and follow instructions
Repeat step 1 and 2 until you are satised with the calibration
What’s in the Box
Insert Battery Packs
Caution
Please fully charge the batteries in advance of operating
Algiz 7 for the first time. New battery packs should be
fully charged before Algiz 7 is disconnected from the
external power source. It takes approximately 3 hours to fully
charge batteries from empty.
Ref. Item Description
1 Battery Pack Two Li-Polymer Battery Packs
212V Adapter 12V Adapter w/ standard power cord. Standard type, 1.8M
3 Screen protector lm
4 Quick start guide Algiz 7 Quick start guide
32
14
ALGIZ 7
Quick Start Guide
handheld

Ref. Symbol Indicator Status Description
Power mode Green: System is on
No light: System is off or LED indicators are off in HotTab
Storage Status Flashing green light: SSD is reading/writing data
Radio Status Green: Indicates that any transmitting radio is turned on
(WiFi, BT, WWAN)
Battery Status
No light: 100% fully charged or power on with AC adapter
Orange light: Charging
Green light: Running on battery >40%
Orange light: <40% and >10%, Red light: Low battery <10%
Function Keys
LED Indicators
Ref. Components Description
1 Power Button* Hold down for 4 seconds to turn the computer on
2 Menu Menu button to control: brightness, volume, battery, power to
modules, and system information
3Up/Down/Left/ Right/OK Button Control of up, down, left, right and Enter functions
4 F1 – F3 3 programmable buttons. Press F1 to congure
* If computer does not respond you can power off by holding down the Power Button until the LEDs switches off.
Hold down for about 10 seconds.
1. Power Button
2. Menu
4. F1-F3
3. Up/Down/Left/
Right/OK Button
L R

handheld
www.handheldgroup.com
Ref. Item Description
1 Stylus Pen -
2Service Window Expansion slots
3 SD Card Micro SD
4 SIM Card -
Rear Side
Left and Right Side
Ref. Item Description
1 Audio In Microphone
2 Audio Out Headphone
3 Ethernet (RJ45) 10/100/1000-based network
4 USB 2.0 Port -
5 DC Power Jack -
6 USB 2.0 Port -
7 RS232 Accepts external connections using the interface of RS232 (D-sub 9 pins)
Please go to www.handheldgroup.com/knowledgebase to download more information.
3
32 51
4
4 76
1
2