Happy Beds Capri Bed King User manual

Capri Bed - King
Assembly Instructions
www.happybeds.co.uk
Important before assembly: .
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
Assemble the product as close to its intended final location/room as possible.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Further instructions are on the following pages.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause damage to the
joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please contact our
customer services (details at the back of these instructions)
(Not metal)
These tools are not
necessary, but may help
to assemble the product.
Do NOT use any power
tools as this may
damage the frame.

M8x30mm
+Spring Washer
+Flat Washer
16x 16x
Already inserted into
Head & Foot Ends
M5x70mm
3x
40x75
4x
M4x20mm
2x
Please check all hardware matches the list below. Should
you notice any are missing please contact your retailer.
We strongly advise that you do not use Power Tools, such as
drills or electric screwdrivers during the assembly as this
may cause irreparable damage and will invalidate your
warranty.
3
A B C
E F G
I 4x J
M4x20mm
40x MN
32x
M5x50mm
8x
D
H
K 28x L
M5
1x
M8x45mm
+Flat Washer
8x
M4x30mm
16x
M5x50mm
28x

PARTS
4
Please ensure you carefully check all the pieces, should you have any
concerns please contact the retailer before assembly commences.
Please have your order number, details of the issue, the product code,
and the batch number from the cartons as this will help us to resolve
your issue much faster.
face out
face out
(2x)
01
02
03
03
04
05
05
05
06
06
06
06
07 (32x)
08
08
08
08
09
10
12
11
11 13
13
13
14
15

Please note that
the Bolt (A) x 16
are prefixed into
parts 1 & 2
1
2
3
E
6
01
03
03
02
03
04 04
05
05
05
05
B
01 02
A
01
02
06
06
06
06
I
I
H

face out
face out
ARROWS ON LABELS
POINT TO EACH OTHER
4
6
C
DD
7
07 07
01
02
01 02 04
G
5
03
E
F
J
J
08
08
face out
03
03

D
D
D
PUSH
PUSH
PUSH
C
07
07
C
07
07
7
8
8
Important:
Make sure when you fit the nuts
that the hole is in the correct
alignment.
Drawer Assembly
III
III
Part M x 3
IV V
10
11
14
11
12
13
13
13
13
L
L
K
K
L
L
K
K
11

FOLLOW LINE ON BACK OF
DRAWER FACE PANEL
Positions For Castors9
10
9
I
II
15 09
M
09
10
N

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the product across the floor as
this will cause damage to the joints. If the product is used on hard flooring, such as wood or laminated
floor, you must place some protection under the legs to stop the product from moving. If this is not
adhered to, it could result in failure to the product that will invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
In the unlikely event that you have problems putting this product together or have damaged or
missing parts, please contact us by visiting:
https://www.happybeds.co.uk/customer-service
Notes