DREAMS Knightsbridge User manual

TV bed
ASSEMBLY INSTRUCTIONS
TO BE
RETAINED
BY END USER

Stage 1 Assembling the frame
Partially screw the four screws into the fixing holes at either end of the
headboard and footboard.
Join the headboard to the side rail with the equipment tray slot ensuring
that the actuating button is at the headboard end of the side rail. (see pic 1)
HEADBOARD
FOOTBOARD
SIDE RAILS
CENTRE RAIL
PLASTIC ENDCAPS
ASSEMBLY SCREWS (20)
WOODEN SLATS
REMOTE CONTROL
AND INSTRUCTIONS
CENTRE
SUPPORT LEGS
EQUIPMENT
TRAY
There are four outer packs containing the
following:
Pack1: Headboard including wooden slats
Pack 2: Footboard including TV, lift and
cabling.
Pack 3: Side rails, centre support rail and
centre supporting legs
Pack 4: Equipment tray, power cables for lift
and TV, control unit, TV instructions and remote
control, plastic end caps and assembly screws.
1
2
3
PLEASE NOTE: Your frame may look slightly different depending on the model purchased. Assembly however, is identical.
Finally, fit the other side
rail and loosely tighten all
screws (see pic 3).
Please note: It is
important to lift the TV
flap and remove all
packaging from the lift
mechanism before
operation.
Join the footboard to the
assembled unit in the
same way (see pic 2).
PLEASE NOTE: Your frame may look slightly different depending on the model purchased.
Assembly however, is identical.

Stage 2 Fitting the centre support
Bolt the two adjustable legs onto the central support bar using fixings
provided and drop the assembled unit into the support in the head and
foot of the bed frame. Ensure that the central rail sits square and the
three supporting legs sit vertically. The three adjustable feet should sit
5mm to 10mm away from the floor. DO NOT ADJUST THE FEET TO BE IN
CONTACT WITH THE FLOOR.
Stage 3 Fitting the equipment tray
Partially screw the two screws into the fixing holes at either end of the
equipment tray. Drop the tray into position on the side rail and tighten all
the screws at ends of side rails and on equipment tray with the allen key
provided.
Stage 5 Fitting the wooden slats
Assemble each pair
of wooden slats with
the two plastic end
caps and one centre
cap. Push firmly
down on each cap to
ensure they are
snapped into
position in the rails.
Stage 4 Electrical connections
5mm - 10mm
Floor
A
E
B
C
D
1. Connect the red phono plug (lift
motor connection) from the
footboard to the red phono socket
on the control box.
(connection A)
2. Connect the two black phono
plugs (lift buttons) from the two
side rails to the two black phono
sockets on the control box.
(connections B)
3. Connect the TV power lead
supplied in pack 4 between the
transformer and power socket on
the control box (marked mains
output to TV).
(connections C & F)
4. Connect the 3m power lead to
the power socket on the control
box and connect to mains power
source. When power is connected
the control box will emit a beep.
(connection D)
5. The three HDMI cables from the
footboard can be routed to sit in
the DVD compartment ready for
connection to DVD players, games
consoles etc.
(connection E)
6. The aerial lead coming from the
footboard should be connected to
the aerial source. Please note the
bed is supplied with a male
antennae connection. For best
signal quality this should be
plugged directly into a female
aerial socket. Use of adaptors will
degrade the quality of the signal.
7. Test the lift function on both side
rail operate buttons.
F

Operation
On initial power of the control box a single
beep confirms that power is connected.
For normal operation press and release
either side rail button once and the lift will
operate. As the TV rises the TV power will
turn on. From the raised position press either
side rail button and release and the TV will
lower and the power will be cut to the TV.
The lift can be halted in any position whilst in
operation with a single press of either side rail
button. A subsequent press will restart the lift.
Maintenance
Leather is a natural product. It breathes, is
warm and has individual characteristics, which
makes each hide unique. Leather will always
display traces of its origin such as brands,
scars, creases and growth. These hallmarks
add character to the bed and do not affect the
wearing qualities of the product. Leather is
highly resilient, durable over time and
develops a patina that increasingly enhances
its appeal.
• Always protect your bed from direct
sunlight as this may accelerate the natural
ongoing discolouration process.
• If you spill something, act quickly to mop
and blot liquid with a clean white cloth. Do
not use detergents and do not rub. In the
event of a stain, please consult a
professional cleaning company.
• Clean all parts of a bed together, as slight
colour changes can sometimes occur.
• Screws holding together the bed frame
should be tightened regularly.
Troubleshooting
Poor picture?
Please check the quality of your TV signal. The TV
provided with the bed requires a strong signal.
Avoid using adapters between the aerial cable
provided and the aerial socket being connected to.
TV will not lift?
Please check all wires are correctly connected
as illustrated in the instructions. The control
box emits a beep when initially powered,
please make sure this is the case.
If control box emits a beep when either button
is pressed, please refer to the child lock
section
TV will not work?
Please check the power to the TV.
TV switch works on one side only?
Please check the two wires coming from the
side rails are connected to the control box.
Cannot switch from TV to accessories?
By simply pressing the input button next to
the power on the TV remote, you can switch
between TV and other connected sources.
Other problems?
Please contact your point of purchase.
PLEASE NOTE: IF ON PRESSING EITHER BED
BUTTON THE CONTROL BOX EMITS A BEEP, THIS
INDICATES THE CHILD LOCK IS ON AND NEEDS TO
BE TURNED OFF IF THE LIFT IS TO OPERATE.
CHILD LOCK FACILITY
To set the child lock: Press and hold either
side rail button. After 2 seconds the control
box will beep. Continue to hold the button
for approx 20 seconds until the beeping
sound stops. The child lock is now active and
the lift will not operate. The child lock can
be activated with the TV either in the
lowered or raised position.
To un-set the child lock: Turn the power
to the control box off at the power source
(normally to the side or behind your bed).
Leave the power off for a minimum of 30
seconds. Turn the power back on. The Child
lock will now be off.
The child lock should be in operation if
unsupervised children are allowed access to
the bed.
BED BUTTON