Harman JBL CSLM20B User manual

USER GUIDE
CSLM20B
BATTERY-POWERED
LAVALIER MICROPHONE

BOX INCLUDES
i. CSLM20B battery-powered
lavalier microphone
ii. Tie-clip x 2
iii. Windshield x 2
iv. LR44 Battery
v. ¼” Adapter
vi. Carry pouch
CSLM20B
BATTERY-POWERED
LAVALIER MICROPHONE

CONNECTING THE MICROPHONE TO
SMARTPHONES/LAPTOPS
i. Plug the 3.5mm TRRS connector into the
headphone jack of the smartphone/laptop. The
lavalier microphone will be used as the default
microphone while shooting video & recording
audio. Slide the switch on the battery module to
smartphone/laptop mode.
CONNECTING THE MICROPHONE TO DSLR
CAMERAS/CAMCORDERS/AUDIO RECORDERS
i. Plug the 3.5mm TRRS connector into the
microphone input on the camera/recorder. Insert
the LR44 battery into the battery module, with
polarity as indicated. Slide the switch on the
battery module to Camera mode.
i. Use the given ¼” adapter to plug the microphone
into the microphone input of the mixer-amplifier.
Insert the LR44 battery in the battery module, with
polarity as indicated. Slide the switch on the
battery module to Camera mode.
CONNECTING THE MICROPHONE TO
MIXER AMPLIFIERS

iii. Attach the microphone to the user’s upper body,
placing it as close as possible to his/her mouth.
i. The benefit of a microphone attached to the user's
clothes is that the microphone will maintain a
constant working distance independent of the
user's movements and thus ensure a constant
output level. Also, a clip-on microphone allows the
user to move about freely and keep their
hands free.
ii. Hold the lavalier microphone firmly & attach the
tie-clip to the microphone at a point just below the
microphone body, as shown. Attach the windshield
on the microphone.
USING THE MICROPHONE

FEATURES
i. Omnidirectional lavalier microphone with 3.5mm
TRRS jack
ii. Perfect for recording, podcast, interviews,
vlogging, etc.
iii. Compatible with smartphones & most
DSLR cameras
iv. Can be used with mixer-amplifiers
v. Extra-long cable
SPECIFICATION
Polar pattern Omnidirectional
Audio frequency
bandwidth 60Hz to 18KHz
Sensitivity -30dB±3dB
(0dB=1V/Pa at 1KHz)
Max. sound
pressure level 110 dB
Output Impedance 2.2 K ohms
Length 6 Meters
Battery Type LR44