Harman JBL Link 10 User manual

HardReset.info:
Hard Reset JBL Link 10
How to factory reset JBL Link 10? How to wipe all data on JBL Link 10? How to restore default
settings on JBL Link 10?
If you're experiencing problems with your JBL Link 10 or you just want to reset the paired devices list this
tutorial will show you how to perform a Hard Reset on your JBL Link 10.

1. In the beginning, turn the device on by pressing and holding the Power button.

2. Nex,t press and hold the Mute button for about 13-15 seconds.

3. Once the device turns off, turn it back on by pressing the Power button.
4. Once the device turns on it should be in the pairing mode.

5. Good job! The Hard Reset is complete.

Microphone
Lights when active
Wi-Fi status indicator

Get Started
IPX 7 Waterproof
1.JBL Link 10 is IPX7 waterproof.
IPX7 waterproof is defined as the speaker can be immersed in water up to 1m for up to 30
minutes.
Press to power on IMPORTANT: To ensure that the JBL Link 10 is waterproof, please remove
all cable connections and tightly close the cap; exposing the JBL Link 10 to liquids without
doing so may result in permanent damage to the speaker. And do not expose JBL Link 10 to
water while charging, as doing so may result in permanent
Download and
run the Google Home app on a phone or tablet.
Set up your JBL Link 10 in the Google Home app.
Specification
•Transducer: 2 x 40mm
•Output power: 2 x 8W
•Frequency response: 65Hz-20kHz
•Signal-to-noise ratio: >80dB
•Battery type: Lithium-ion Polymer (3.7V, 4000mAh)
•Battery charge time: 4 hours @5V 1A
•Music play time: up to 5 hours (varies by volume level and content)
•Wireless network: 802.11b/g/n/ac (2.4/5GHz)
•Bluetooth version: 4.2
•Supported audio formats: HE-AAC, LC-AAC, MP3, Vorbis, WAV (LPCM), FLAC, Opus
•Dimensions (Dia x H): 86 x 169 mm
•Weight: 710g
Google, Google Play, Chromecast, Chromecast built-in, Google
Home and other related marks and logos are trademarks of Google
Inc.
Chromecast built-in may require subscription(s).
* Requires compatible device. Availability and performance of
certain other features and services are service, device and network-
dependent and may not be available in all areas; subscription(s)
may be required, and additional terms, conditions and/or charges
may apply.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
HARMAN International Industries, Incorporated is under license.
Other trademarks and trade names are those of their respective
owners.
This equipment complies with FCC/IC RSS-102 radiation exposure
limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm
between the radiator & your body.
TR03992_F
damagetothespeakerorpowersource.
2.