Hasbro Lite-Brite Mini-X Connect User manual

LEGAL/ELECTRONICS SAFETY STATEMENTS
BATTERY INFORMATION
• Non-rechargeable batteries are not to be charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before being charged.
• Different types of batteries or new and used batteries are not to be mixed.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the followingtwo conditions: (1) the device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
aClass B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can
radiate radiofrequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipmentdoes cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
TO OTHER
Customer service contact email:
customerser[email protected]
basicfun.com
Basic Fun Social Media Pages
@basicfuntoys
facebook.com/basicfuntoys
HASBRO and its logo, and LITE BRITE and its logo are trademarks of Hasbro and
are used with permission. ©2023 All Rights Reserved.
The Basic Fun logo, product and package design ©2023 Basic Fun, Inc. BOCA RATON,
FLORIDA 33431, USA. www.basicfun.com. All rights reserved. Manufactured under
license. Basic Fun products are safety tested and comply with
ASTM F963. MADE IN CHINA. TEL: [phone]
Each sold separately, subject to availability. Colors and styles may vary from photos as
we continue to modify and improve our products. ADULTS NOTE: Remove all tags
and plastic fasteners before giving toy to child. Please keep this package and instruction
sheet for future reference.
CAN ICES-3(B)/NMB-3(B) WARNING! Not suitable for children under 36 months,
Small Parts. Choking hazard. Misuse of transformer can cause electrical shock.
Connect
INSTRUCTIONS
WARNING:
CHOKING HAZARD - Small Parts.
Not for Children Under 3 years.
T
e
m
p
l
a
t
e
s
f
o
r
m
u
l
t
i
p
l
e
u
n
i
t
s
c
a
n
b
e
f
o
u
n
d
a
t
b
a
s
i
c
f
u
n
.
c
o
m
!
units*!


Press
unit
down
to power
on & off
When
pressed
down,
bottom
collapses
into unit
CONTENTS
1 - MINI•X CONNECT UNIT
170 - MINI PEGS
8 - TEMPLATES
POWERING UNIT
Frosty Cupcake Extra Alien Avocado Pit
Oh My Goodness Cool Beams
Puppy Bones 2 of Hearts OMG Face
The Lite-Brite Mini-X Connect unit is powered by 2 “AAA” batteries (not included).
Using a Phillips/cross head screwdriver (not included),
loosen the screws on the battery compartment cover
(screws stay attached to cover).
Remove the cover. Insert 2 “AAA” Batteries (not included).
Alkaline batteries recommended.
Replace cover and tighten the screws.
TIP: Build unit while power is off to preserve battery life.
Installing Batteries
After installing your batteries,
the Mini-X Connect is ready to light up.
The front grid functions as a push button,
and can be pressed down to power on.
To turn off the unit, simply press down on the grid again.
2.1.
4.3.
6.5.
TURN ON/OFF UNIT
INSERTING PEGS CONNECTING UNITS
BUILDING YOUR ART
1. Choose your desired template
USING TEMPLATES
When building your art, insert the pegs on the matching
color mark on the template. For example,
Blue pegs go on areas marked with a blue “B”.
IF YOU HAVE MORE THAN ONE MINI•X CONNECT
UNITS, YOU CAN CONNECT THEM TOGETHER
TO EXPAND YOUR ARTWORK!
Inspiration templates for multiple units can be found at basicfun.com!
CONNECT AS MANY UNITS AS YOU LIKE!
To connect units,
use the fixed
connector pieces
in the back of the
unit to connect to
open slots on
2nd Mini•x Connect.
2. Place the template on top of the grid
3. Put a peg into each of the precut
holes to help stabilize your template.