Hasbro MY LITTLE PONY Rainbow Wishes Amusement Park User manual

HASBRO.COM
FOR NEW PRODUCTS AND OFFERS
HASBRO.COM
FOR NEW PRODUCTS AND OFFERS
Questions? Call: 1-800-327-8264
™™
Rainbow Wishes™ Amusement Park
Thank you for purchasing this
MY LITTLE PONY® playset! For
maximum play value, please read
and follow instructions carefully.
Playset comes with ROUND’N ROUND™
pony figure, wheeled car and brush. Pony’s
foot contains magnet.
AGES 3+
60404
© 2004 Hasbro. All Rights Reserved.
® denotes Reg. U.S. Pat. & TM Office.
60404 PN 6390490100 Adult assembly required.

pony
clip
Ticket booth
When pony touches heart shape at the
base of the ticket booth, a ticket pops
out. Push ticket back in to re-set.
To construct front part of the playset: Slide part A3 into part A2. Next,
line up the four corners of part A1 with those of part A2, and snap firmly
into place. Press ticket booth (A4) into place, then sign (A5).
Press arch (D) into place in the middle section of the playset.
Slide back crank (F1) through hole at the top of the arch, then slide Ferris wheel (E) onto the
crank. Align indents on the front crank (F2) with the points of the hearts on the wheel; slide front
crank over the back crank until wheel is firmly in place.
Click butterfly wings (H) onto pony clips (G), then insert clips into the holes on the Ferris Wheel.
Ferris Wheel
Press ponies onto clips. To make wheel spin, turn
front or back crank.
Skycoaster
Place car onto wheel indentations at the
top of the ride, then push. When car hits
the button at the end of the ride, a photo
pops out. Push photo back in to re-set.
Magnetic features can be activated by
any My Little Pony® figure.
TO PLAY
TO ASSEMBLE
Press middle part of the playset (B) into place, then the end section (C).
E
ticket
booth
A4
A3
A2
front
panel
A1
middle part
B
end section
C
arch
D
back crank
F1
front crank
F2
wishing
wheel
G
butterfly
wings
H
wheel
indentations
sign
A5
A2