Hasbro Nerf Hyper SIEGE-50 User manual

CLEARING A JAM RESET SWITCH
STORING YOUR BLASTER
RESET SWITCH
1
1
NERF and HASBRO and all related trademarks and logos are trademarks of Hasbro, Inc.
© 2020 Hasbro. TM & ®denote U.S. Trademarks.
Hasbro, Pawtucket, RI 02861-1059 USA. US/CANADA TEL. [phone].
U.S. Pat. Pend., CN, EP & US Reg. Des. Apps.
Retain this information for future reference.
F0532 PN00065926
Open access door on either side
of blaster and remove any jammed
rounds. Close door. Make sure you aim
the blaster away from you and anyone
else while releasing jammed rounds.
Open hopper lid and
remove any jammed
rounds. Close lid.
If you cannot move the slide,
pull down and hold reset switch
and pull slide all the way back.
Do not store blaster primed and ready to fire.
Hey NERF Nation!
Join us online and keep up with
the latest and greatest NERF news!
14
+
2
21
SIEGE-50
™
TRIGGER
HOPPER
2
TACTICAL RAILS
FILL LINE
Attach Nerf Hyper™ canisters to rails for additional firepower. (Canisters not included.)
Do not fill
beyond this
line.
Nerf Hyper rounds
are compatible
only with Nerf
Hyper blasters.
TO AVOID EYE INJURY:
WARNING: Do not aim at eyes or face.
Use of eyewear required for players and people within
range. Use only official Hyper rounds. Do not modify
rounds or blaster. Ages 14 and up.
HOPPER LID
PRIMING SLIDE
PRO TIPS:
Open FULLY to load.
DO NOT OVERFILL
READ ALL INSTRUCTIONS
COMPLETELY BEFORE USE.
PRO TIPS:
Pull slide ALL THE WAY
back. Push slide ALL
THE WAY forward.
Do not tilt front of
blaster up when
priming.

Make sure trigger lock is locked. Tilt front of blaster up. Lift hopper lid. Add
rounds to hopper. DO NOT OVERFILL. Includes
40 rounds; additional rounds not included.
Close lid. Hopper lid must be fully closed for
blaster to fire.
LOAD
FIRE SLAM FIRE
1 2 3
Move trigger
lock to unlocked
position.
Hold down trigger and keep moving slide all the way back
and all the way forward to fire the rounds more quickly.
Please note that the rounds will only fire as fast as the
gravity-fed system loads them into the chamber.
Point front of blaster level or tilt it down -- DO NOT TILT IT UP. Tilting
blaster up when priming may not allow the gravity-fed loading system to
feed a round into the chamber. PULL PRIMING SLIDE ALL THE WAY BACK,
THEN PUSH IT ALL THE WAY FORWARD. Ready indicator will appear on end
of blaster. Blaster is primed when ready indicator is visible.
Adjust blaster to aim it toward
your target. Press trigger.
23
1
READY
INDICATOR
TRIGGER LOCK
On side of blaster, move trigger lock
down to lock trigger and up to unlock.
Always put the trigger lock in locked
position when blaster is not in use and
when storing blaster.
X50
MAXIMUM