HATHASPACE HSP002 User manual

Smart True HEPA
Air Purifier 2.0

Warning - To reduce the risk of fire or electric shock, do not use this unit with
any solid-state speed control device.
[email protected]
Hathaspace dealers.
, or authorized
Specifically, do not use step down transformers or
outlet converters, or the warranty will be voided.
easily
change
fit easily
Warning - Unplug or disconnect this unit from the power supply before
servicing.

Safety Tips

Use 120V U.S. power supply only.

4.
5.
As the final stage of purification, the Cold Catalyst filter removes VOC’s and
other harmful gases found in household products.
Activated carbon absorbs smoke, odors, and gases in the air including but not
limited to formaldehyde, ammonia, sulfur dioxide, nitrogen oxide, toluene,
acetic acid, trimethylamine, benzene, and acetaldehyde. Small microporous
zeolite minerals are added to the carbon filter to remove heavy metals and
combustion chemicals.
M G
H13 Medical Grade True HEPA Filter
Acve Carbon Filter
the life of the composite filter.
5-in-1 Purification

6. Sleep Timer: Sleep Timer turns off the unit after a preset time. With the unit
on, press the timer button. Your purifier will turn off at the time you determine,
shown on the display. You can use Sleep Timer to turn your unit off after you
leave, saving power. Keep pressing the timer button to increase the number of
hours (from 1-12).
7. Wake Up Timer: Wake Up timer turns on the unit after a preset time. With
the unit off, press the timer button. Your purifier will turn on at the time you
determine, shown on the display. You can use Wake Up Timer to keep your air
clean after you leave. Keep pressing the timer button to increase the number
of hours (from 1-12).
8.
9.
Control Panel Introduction
SPEED
PM Index
TIMER

Good
Moderate
Unhealthy for
sensitive groups
Unhealthy/hazardous
151 - 500
A precision laser sensor detects your air quality in real-time, reporting
live PM index reading, while a light strip on the front panel changes colors
according to your EPA index score, so you can see the air quality from across
the room.

may expose the purifier to condensation.
Before using for the first time, unpack the filters, remove the polybag, and
reinstall them.

3. First, place the bottom of the front panel in the slots at the bottom of the
unit and then close the top of the panel. The magnets at the top of the purifier
will keep the front panel secure.
3. Removing the Composite Filter: Use the white tabs to pull the filter out.
filter inside with tabs facing you.
pegs in the corresponding slots.
,
will pop out.
Front Panel

Plug your purifier into the 120V outlet.
Press MAX
Press AUTO to switch your purifier to auto mode. In auto mode,
the air purifier will automatically adjust based on the real time
PM 2.5 Index. The display will count down for 90 seconds to
gather a reading, before adjusting.
Press LIGHT to turn the air quality Indicator light ON/OFF.
AUTO and TIMER button for 3 seconds
Press SPEED

to optimize performance.
reset the filter replacement reminder by holding the AUTO and TIMER
button at the same time for 3 seconds.
Note: To ensure your warranty remains active and to avoid shortening the
life of your air purifier, use only certified Hathaspace filters.
Guidelines:
Purchasing Addional Air Filters
Replace filters every 4 months for optimal performance.
Do not clean the filters with water or other liquids. Use a keyboard
duster to gently remove any physical debris such as lint and hair.
https://amazon.com/hathaspace
OR
Scan below using your phone’s camera.
https://hathaspace.com/collections/filters
OR
Scan below using your phone’s camera.
Hathaspace Direct Amazon

Go to hps://hathaspace.com/pages/warranty and fill out the short form
or scan the QR code below.

Spring 2020