HATO TA-100 User manual
1
HATO TA-100
ESCUTCHEON PLATE OPERATING MANUAL
3
Congratulations on your purchase of the
HATO TA-100
electronic escutcheon plate. Welcome to the
users of HATO products. user manuals
for HATO POLSKA Sp. z o.o
. can be downloaded from the
website:
http://www.hato.com.pl
!!! Before assembly and the first use, read the operating instructions carefully
and keep them for future use !!!
SAFETY RECOMMENDATIONS AND PRECAUTIONS
For safety reasons, do not keep the keys inside, so you can open the door from the outside in an
emergency in any situation.
If the lock informs you about discharged batteries, replace them with new ones as soon as possible.
Read the following instructions carefully and follow the instructions contained therein.
SAFETY OF USE
Do not leave the battery outside the device unattended. IT can be swallowed by children or pets. If
something like this happens, see your doctor immediately.
Batteries may not be charged, short-circuited or thrown into fire. There is a risk of fire and explosion!
Do not leave worn batteries in the device.
In the event of a device failure, it should be sent to the following address: HATO TRADE SP. ZOO
Żeromskiego street , 1 41-205 Sosnowiec (with a ‘service’ note).
Importer: HATO POLSKA SP ZOO, based in Katowice, voiv, Śląskie, Tunelowa 57 street
NIP: 9542813661; biuro@hato.com.pl, www.hato.com.pl tel. +48 32/785-25-42
4
TECHNICAL DATA
Material
Zinc alloys, plastic
Internal escutcheon dimensions
170 x 70 x 20 mm
External escutcheon dimensions
170 x 70 x 20 mm
Unlocking with
Password
A card / keychain
Mechanical key (emergency opening)
Data capacity
500 codes
500 cards
10000 recent events
Colour
Silver
Black
Purpose
Wooden door
Aluminum door
Powered by
6V / 8x AAA alkaline battery
Door thickness
30 - 60 mm
Air humidity (min. - max.)
20% - 90%
Air temperature (min. - max.)
-25 C - 60 C
Low battery indication
below 4,5V
LIST OF ITMES
External
escutcheon plate
1 pc
Internal
escutcheon plate
1 pc
Keychain
3 pcs
Keys
2 pcs
Rubber seal
2 pcs
5
Sleeve 8 x 30 mm
1 pc
Sliding screw
1 pc
Bushing 6 x 30 mm
2 pcs
M5 x 20 mm screw
1 pc
M5 x 30 mm screw
1 pc
M5 x 50 screw
1 pc
M4 x 30 mm screw
2 pcs
M4 x 50 mm screw
2 pcs
M3 x 6 mm screw
4 pcs
6
ESCUTCHEON PLATE STRUCTURE
External escutcheon plate
85mm
70mm
Internal escutcheon plate External escutcheon plate
Speaker
Battery cover
Internal
escutcheon plate
MicroUSB emergency
power socket
Emergency key plug
Adjustable
mounting sleeve
48mm 20 mm
7
ASSEMBLY
Assembly instructions
1
Set the handle in the desired direction
Set the handles in the
direction of the door opening.
A detailed description of
changing the direction of the
handle can be found in item
5.2 on page 7.
2
Install the sleeves for twisting escutcheons
You can adjust the position of the top
sleeve within the range from 55 - 100 mm,
depending on the location of the hole in
the door.
Lead the
cable
connecting
the
signboards
through the
upper hole.
Insert the batteries
Use only
alkaline batteries
!
Attention Do not use
Storsage batteries.
Install the battery cover
Install the external escutcheon
and connect the wires
Mount the internal escutcheon
3
4
5
6
8
CHANGING THE DIRECTION
OF THE HANDLE
Changing the direction of the handle in the external panel
Remove the 4 fixing screws Set the handle
In the right direction After adjusting the handle,
screw it on
Changing the direction of the handle in the internal panel
Remove the 4 fixing screws Set the handle
In the right direction After adjusting the handle, screw it on
EMERGENCY KEYS
!!! The emergency keys are only used to open the lock in emergency mode. Emergency keys are
not intended for daily use. Excessive use may damage the lock !!!
9
OPERATING THE LOCK
Basic controls
Button
Function
2
Up
8
Down
4
Left
6
Right
*
Exit or
-if held for 3 sec. - entering the menu
#
Confirm
10
Reset
button
FIRST START-UP
Commissioning via the Reset buton
Open the battery cover and press the Reset button for 5 seconds.
The screen will show "initialization success".
After this operation, the lock is ready for operation.
Commissioning via the numeric keypad
•
Enter the menu by pressing * for 3 seconds
*
•
Select position
5 –system set
Confirm by pressing
#
•
Choose
yes
Confirm by pressing
#
•
Choose position
7 –initialization
Confirm by pressing
#
•
The lock is ready for operation.
11
MAIN MENU
Entering the MENU - press and hold down the "*" key twice for 3 seconds.
(If an administrator has been added, verify the account with the password or administrator card first).
MAIN MENU
1.
ADD ADMIN
2.
ADD USER
3.
DEL USER –
delete user
4.
MODIFY USER
5.
SYSTEM USER –
system settings
6.
VIEW INFO -
system information
1.
ADD ADMIN
1.1.
Password Reg –registration with a password
1.2.
Card Reg –registration with a card
2.
ADD USER
2.1.
Password Reg –registration with a password
2.2.
Card Reg –registration with a card
3.
DEL USER
–delete user
4.
MODIFY USER
5.
SYSTEM USER
–system settings
5.1.
Set time
–
time settings
5.2.
Volume - sound settings
5.3.
Passage mode
5.4.
Locking time - access time settings
5.5.
Double verify - double access verification
5.6.
Language –language settings
5.7.
Initialization -
device reset
6.
VIEW INFO
–
system information
6.1.
Record - history of events
6.2.
Memory used
6.3.
F-Version - software version
12
TERMS OF WARRANTY
1.
.The Seller provides a guarantee for a period of 24 months - but not longer than 27 months - from the date of
sale by HATO. The seller of the device is the performer of the warranty services (guarantor). Defects revealed
during this time will be removed free of charge. The repair will be made as soon as possible, not exceeding 14
days from the date of delivery of the device to the HATO Service Center. The guarantor reserves the right to
extend the above period in justified cases.
2.
A warranty repair is understood as the performance of specialized activities aimed at removing a defect in a
device covered by the warranty. According to the opinion of the HATO service, the device or components, in
which material, construction or production defects are found, and therefore malfunctioning, will be repaired or
replaced with a defect-free device. The replaced parts become the property of the seller after servicing. The
condition for using this guarantee is:
2.1. Presentation of the correction of the completed warranty card (seller's stamp, serial number of the device,
date of sale, sales document number, buyer's data, date and place of installation, buyer's signature)
2.2. Description of the product defect and a written complaint notification to the seller
2.3. Attaching a valid purchase document (applies to products to which the warranty card is not attached)
3.
The warranty does not cover:
a) mechanical, thermal, chemical and any other damage resulting from the actions or omissions of the user or
the action of external force (e.g. atmospheric phenomena, surges or disturbances)
electrical, electromagnetic interference)
b) damage resulting from:
- improper assembly (inconsistent with the assembly manual) and operation inconsistent with the intended use
or the operating manual, design changes and modifications made by the user and third parties
- using malfunctioning or damaged products
- using non-original spare parts or accessories other than HATO
- too much work
c) damage to devices previously dismantled or repaired by unauthorized persons
d) devices with a damaged, illegible, incorrectly filled in warranty card
e) damage to devices used intensively and not subject to the required periodic inspection by the installer or
other authorized company (the fact of the inspection and the scope of the maintenance activities carried out
must be recorded in the warranty card)
f) replacement of parts with a specified lifetime that are subject to wear and tear during normal use: batteries,
accumulators, bulbs, fuses
g) maintenance
h) devices where the serial number has been removed, damaged or changed
4.
In the event of 4 unsuccessful warranty repairs, generally considered essential, the buyer has the right to
replace the goods with a new one, free from defects. If you purchase several devices in one set, the possibility
of replacement applies only to the device, the repairs of which have been unsuccessful four times.
5.
The buyer is obliged to notify the seller about the defect within 2 days from the date of its disclosure
6.
This warranty covers only HATO products installed and used in Poland
7.
An unfinished and / or non-stamped warranty card is invalid
8.
The warranty does not cover the costs of disassembly, reassembly and commissioning of the product as well as
transport to the HATO service.
9.
NOTE! the guarantee becomes void if the machine is installed by unauthorized persons
Table of contents
Other HATO Door Lock manuals
