Ballard Designs Palisades ME097 User manual

PRODUCT NAME: Palisades Coffee Table
ITEM NUMBER: ME097
ASSEMBLED DIMENSIONS: 16”H x 48” Square
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 2-23-2021 Page 1 of 3
MADE IN INDIA
SUZANNE KASLER
BALLARD DESIGNS
STEP 1: Locate threaded holes in Base (F) and orient them up on a padded surface. Align the
slots in L-Clip (D) with threaded holes and fasten to Base using Bolt (B) with Flat Washer (A).
Firmly tighten using Wrench (C).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.

Page 2 of 3
Ltr.
A
B
16
16
Qty. Hardware Included
Ltr.
E
D
1
1
Qty. Components
C
D
1
8
TOOLS REQUIRED:
Wrench (inlcuded)
Two person assembly suggested
Remove all parts, hardware and protec-
tive packaging from carton and carefully
arrange on a clean, level, padded
surface.
Flat Washers
Bolts
Wrench
Top
Base
L- Brackets
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 3 of 3
STEP 1: Locate threaded holes in Base (F) and orient them up on a padded surface. Align the
slots in L-Clip (D) with threaded holes and fasten to Base using Bolt (B) with Flat Washer (A).
Firmly tighten using Wrench (C).
(F)
(D)
(B)
(A)
STEP 2: Invert Top (E) onto a padded surface then gently invert and set Base (F) over Top. Align
slots in L-Brackets with threaded holes in Top then insert Bolt (B) with Washer (A) and firmly tighten
using Wrench (C).
(F)
(E)
(D)
(A)
(B)
Assemble in location for intended use.
STEP 1: Place Base (F) onto a level, padded surface with holes oriented to the top. Align slots in
L-Brackets (D) with holes in Base then insert Bolt (B) with Flat Washer (A). Fully tighten and secure
using Allen Wrench (C).
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alchohol based
cleaners or polishers. Promptly remove spills.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com