Haws 8164 Guide

1/18 Model 8164 Page 1 of 5
No. 2080138(15)
1455 Kleppe Lane Sparks, NV 89431-6467 [phone] Fax [phone]
E-mail: [e-mail]  website: www.hawsco.com
Model 8164
Shower
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
LIMITED WARRANTY
HAWS warrants that this specific product is guaranteed against defective material or poor
workmanship for a period of one year from date of shipment. HAWS liability under this
warranty shall be discharged by furnishing without charge
F.O.B. HAWS Factory any
goods, or part thereof, which shall appear to the Company upon inspection to be of
defective material or not of first class workmanship, provided that claim is made in writing to
Haws within a reasonable period after receipt of the product. Where claims for defects are
made, the defective part or parts shall be delivered to the Company, prepaid, for inspection.
HAWS will not be liable for the cost of repairs, alterations or replacements, or for any
expense connected therewith made by
the owner or his agents, except upon written
authority from HAWS, Sparks, Nevada. HAWS will not be liable for any damages caused by
defective materials or poor workmanship, except for replacements, as provided above.
Buyer agrees that Haws has made no other warranties either expressed or implied in
addition to those above stated, except that of title with respect to any of the products or
equipment sold hereunder and that HAWS shall not be liable for general, special, or
consequential damages claimed to arise under the contract of sale.
The emergency equipment manufactured by HAWS is warranted to function if installation
and maintenance instructions provided are adhered to. The units also must be used for the
purpose for which they were intended. This product is intended to supplement first-aid
treatment. Due to widely varying conditions, Haws cannot guarantee that the use of this
emergency equipment will prevent serious injury or the aggravation of existing or prior
injuries.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT: 1-800-766-5612
FOR CUSTOMER SERVICE: 1-888-640-4297

1/18 Model 8164 Page 2 of 5
LOCATION OF UNIT: The Model 8164 Emergency Shower should be installed in
close proximity to potential accident areas. It should be clearly identified free from
obstructions and easy to access.
SUPPLY LINE: The minimum recommended line size is 1” IPS with 30-90 psi (2-6
ATM) flowing pressure. Where sediment or mineral content is a problem, an inlet filter
is recommended.
PLUMBING CONNECTIONS: Inlet supply is female 1” IPS.
TROUBLESHOOTING
PROBLEM
REPAIR CHECKLIST
1. No flow. 1. Check the main shut-off valve.
2. Insufficient water flow at the
showerhead. 2. a. Verify minimum 30 psi (2 ATM) flowing supply line pressure.
b. Probable clogging of flow control
inside showerhead. Unscrew
showerhead off of elbow and clean
rubber flow control.
For more information about Haws products, see our website: www.hawsco.com
© 2018 Haws® Corporation – All Rights Reserved
HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.

PARTS BREAKDOWN
SP170 TEST TAG
SP177 SHOWER SIGN
SP829HPS
SHOWER VALVE
ASSEMBLY
1" X 6-1/2"
HI POLISH NIPPLE
0003516457
APPROVED
DRAWN
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BYECN NO.
PAGE
DATE
DATE
ECN:
REVISED PER
CHKD
Haws Corporation - All Rights Reserved
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.
DO
5/27/98
15
0002080138
8164
SHOWER
NA
11
FV 02/16/18
VWC
3 OF 5
PARTS BREAKDOWN
5279
2018
VWC

46"
(1173mm)
MAX
ON POSITION
82" MIN - 96"
(2083mm MIN - 2438mm)
(TO FLANGE)
(376mm)
ROUGH-IN
14 3/4" 16"
(408mm)
9"
(229mm)
3 1/2"
(89mm)
ROUGH-IN
(198mm)
7 3/4"
SUSPENDED
CEILING
REMOVABLE
ACCESS
PLATE
HANGER BRACKETS,
(NOT SUPPLIED)
AS REQUIRED
3 1/2"
(89mm)
(35mm)
1 3/8"
1" NPT SUPPLY
CLOSE NIPPLE
1 5/8"
(41mm)
REF
(876mm)
34 1/2"
MAX
1" NPT BRASS
STAY-OPEN
BALL VALVE
1" UNION AND
CLOSE NIPPLE
(NOT SUPPLIED)
HANDLE
(CLOSED
POSITION)
WALL
2X 1" IPS FITTINGS
(NOT SUPPLIED)
STAINLESS STEEL
CABINET
16" MIN
(406mm MIN)
Ø10 1/2"
(267mm)
FLANGE OD
Ø10"
(254mm)
HOLE DIA
9 3/8"
(238mm)
3
SEE SHEET 2 FOR ALTERNATE
"HANG DOWN" INSTALLATION
2X 1" IPS PIPE
(NOT SUPPLIED)
1" IPS PIPE
(NOT SUPPLIED)
1" NPT SUPPLY
ELBOW & PIPE
APPROVED:
DRAWN:
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
PAGE
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
DO
3/9/00
15
0002080138.D
8164
SHOWER
NA
12
FV 02/16/18
VWC
4 OF 5
INSTALLATION
5279
2018
VWC
NOTES:
1. WHEN INSTALLING THIS UNIT, LOCAL , STATE, OR FEDERAL CODES SHOULD BE ADHERED TO FOR
INSTALLATION DIMENSIONS (LOCATIONS), WASTE AND SUPPLY REQUIREMENTS OTHER THAN SHOWN.
2. TO COMPLY WITH ANSI Z358.1-2014 FOR EMERGENCY SHOWER EQUIPMENT:
- SHOWER SHALL BE POSITIONED SUCH THAT SHOWER HEAD IS NO LESS THAN 82" (2083mm) AND NO
GREATER THAN 96" (2438mm) FROM SURFACE ON WHICH USER STANDS.
- SHOWER SPRAY PATTERN SHALL HAVE A MINIMUM DIAMETER OF 20" (508mm) AT 60" (1524mm) ABOVE
SURFACE ON WHICH USER STANDS, AND CENTER OF SPRAY PATTERN SHALL BE LOCATED NO LESS THAN
16" (406mm) FROM NEAREST OBSTRUCTION.
3 INSTALL STAINLESS STEEL CABINET AS CLOSE TO DOOR JAM AS POSSIBLE.
4. DIMENSIONS MAY VARY BY ±1/2" (13 mm).
(NOTES CONTINUED ON SHEET 2.)
1" IPS PIPE
(NOT SUPPLIED)
(SUPPLIED)

ESCUTCHEON
10 7/8"
(276mm)
SUSPENDED
CEILING
WALL
WALL
5
16" MIN
(406mm) 1" IPS PIPES & ELBOW
(NOT SUPPLIED)
1" NPT HI-POLISH
NIPPLE (SUPPLIED)
82" MIN - 96"
2083mm MIN - 2438mm
APPROVED:
DRAWN:
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
PAGE
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
DO
3/9/00
15
0002080138.D
8164
SHOWER
NA
22
FV 02/16/18
VWC
5 OF 5
INSTALLATION
5279
2018
VWC
NOTES: (CONTINUED FROM SHEET 1)
5 FOR ALTERNATE "HANG DOWN" INSTALLATION OF SHOWER HEAD PERFORM THE FOLLOWING STEPS:
A) SWAP NIPPLE, 1" NPT X 5" LONG, FOR NIPPLE, HI-POLISH, 1" NPT X 6 1/2" LONG (SUPPIED).
B) USE CEILING ESCUTCHEON FOR 1" NPT PIPE.
FLOOR
HALLWAY
5
5
ALTERNATE "HANG DOWN" INSTALLATION
5
TOP VIEW