Hay TWO-COLOUR User manual

– INSTRUCTION MANUAL –
DESIGN BY MULLER VAN SEVEREN
TWO-COLOUR

 PARTS 

C Screw x8

B Leg x4

F Bolt x4

A Frame x1  H Table top x1

G Screw

2 Allen key x1

1 Allen key x1

D Lock washer x4  E Washer x4
Ø105 x8
Ø120 x8
160x82 x10
200x90 x12
240x90 x14
This instruction manual shows the 160 x 82 cm table.
The same procedure applies to all sizes.

1.
Secure the legs

B on the frame

A as shown in the illustration below,
using the screws

C . .

2.
Tighten the screws using the Allen key

1 . .

3.
Insert the bolt

F in the corner holes in the frame. Make sure the washer

E
is closest to the frame, followed by the lock washer

D .

F

E

D

4.
Tighten the bolts using the Allen key

2 .

5.
Place the frame with legs on the table top

H . Insert the screws

G in the holes.

6.
Start by loosely tightening all the screws with the Allen key

1 .
Then tighten all the screws completely.
NOTICE
DO NOT OVER
TIGHTEN SCREWS.

7.
Turn the table over (minimum two people are recommended).

8.
Once the table is standing upright, make sure it is stable.
Adjust the feet by turning them if needed.

– Care & Maintenance –
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information
on Two-Colour by scanning the QR code
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
You can also find the same information here
hay.dk/downloads

Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
18122020