Heatcom HC 60 Instruction Manual

1
HC 60
User guide & installation instructions
UK / DE / DK / FI / NO / SE

Heatcom
Corporation A/S
Barmstedt Allé 6
DK–5500 Middelfart

3
UK – User guide &
installation instructions 5
DE – Benutzerhandbuch
& Installationsanleitung 21
DK – Bruger & installationsvejledning 37
FI – Käyttöopas ja asennusohjeet 53
NO – Brukerveiledning og
installasjonsinstruksjoner 69
SE – Användarhandbok och
monteringsanvisning 85

4

5
HC60 contains the necessary functions to full the
demands set out in Ecodesign Lot20.
The thermostat is programmable, has adaptive heating
and open window function. The control of the oor
heating is then easily adapted to t the needs in
different rooms.
A temperature limiting function is included, ideal for use
together with wooden or engineered oor boards.
The temperature is measured through oor sensor,
room sensor or the 2 in combination.
INTRODUCTION
UKSE NO FI DK DE

6
1
2
3
4
DISPLAY & BUTTONS
BUTTON SHORT PRESS LONG PRESS
1 Switches thermostat On/Off
2
Switches between
“Manual/Auto” mode
In settings, “Acknowledge”
When “On”, enters user
settings
When “Off”, enters
advanced settings
3Temperature or setting
“down” Hold both to activate /de-activate “Screen lock”
Button 4 long press when
“off” will enter factory
settings
4Temperature or setting “up”

7
1 6 5
374
DISPLAY DESCRIPTION
1 Shows time of day
2 Current temperature
3 Shows day of the week
4 Current operation mode
5When in “Auto”, shows active “Event” as number and as icon
6 “Screen lock” active
7 “Heating” active
2
UKSE NO FI DK DE

8
USER SETTINGS
SET TIME AND DAY OF WEEK
When thermostat is switched
on long-press
Navigate with to
choose “01 Weekly”
Conrm with
Change setting with
Conrm and go to next

9
Navigate with
to choose “02 Auto”
Conrm with
1 2 3 4 5 6
Change setting with
Conrm and go to next
EDIT EVENTS
WAKE
UP LEAVE HOME BACK HOME LEAVE HOME BACK HOME SLEEP
6:00 20°C 8:00 15°C 11:30 15°C 13:30 15°C 17:00 15°C 22:00 15°C
UKSE NO FI DK DE

10
SET HOLIDAY MODE
Navigate with to
choose “03 Holiday”
Conrm with
Set days away with
Conrm and go to next
Set temperature with
Conrm

11
Toggle Screen lock with
Change setting with
Conrm and go to next
SCREEN LOCK
ADVANCED SETTINGS
When thermostat is
switched off long-press
After 5 seconds with no activity,
the settings will be closed.
UKSE NO FI DK DE

12
NO. DESCRIPTION FUNCTION DE-
FAULT
A1 Calibrate temperature +/- 9°C, the calibrated
temperature is displayed -1
A2 Hysteresis, heating 0,5 to 5°C 1°C
A3 Screen lock function 0 ~ Power button can be operated
1 ~ All buttons lock 0
A4
Power failure state 0 ~ Same power state,
before interrupt
1 ~ Power off
2 ~ Power on
0
A5 Backlight time 5 to 30 seconds 10
A6
Week type 0 ~ 5 weekdays + 2
weekend
1 ~ 6 weekdays + 1
weekend
2 ~ 7 days the same
0
A7 Min. allowed temperature 1 to 10°C 5°C
A8 Max. allowed temperature 20 to 70°C 35°C
A9 Frost protection temperature 1 to 10°C 5°C

13
NO. DESCRIPTION FUNCTION DE-
FAULT
AA Floor sensor limit 20 to 70°C (if - - the
function is de-activated) 45°C
AB Hysteresis, oor limit 1 to 9°C 2°C
AC Open window, trigger 10 to 20°C (if -- the function
is de-activated) --
AD Open window, time 10 to 20 minutes 10
AE Restore defaults Long press to restore
AF Adaptive heating On ~ intelligent heating On
UKSE NO FI DK DE

14
FACTORY SETTINGS
In case of failure on one of the sensors E1 or E2 will
displayed and the heating will be de-activated.
E1 is room sensor failure and E2 is oor sensor failure.
ERRORS
NO. DESCRIPTION FUNCTION DE-
FAULT
BN
Sensor type N1 ~ Room sensor (no oor
limit)
N2 ~ Floor sensor (no oor
limit)
N3 ~ Combined sensor (oor
limit active)
N1
BC Descaling function 0 ~ Disabled (do not change)
1 ~ Enabled 0
BO Product information Only information

15
Supply voltage 90-240 V / 50-60 Hz
Max. load 3600 W
IP class IP20
Temperature range +5° C ... +40° C
Sensor settings Floor / Room / Room with oor sensor as
temperature limiter
Display type 1,6” LCD backlit
Floor sensor type 10 KΩ @25°C, length 3m
Colour White, RAL 9003
Dimensions 82 x 82 x 53 mm
Standards LVD 2014/35/EU • EN60730-1 • EN60730-
2-9 • EN50081-1 • EN50082-1 • RoHS
(EU)2015/1188 ECO Design • REACH
regulation (EC) No.1907/2006
SPECIFICATIONS
UKSE NO FI DK DE

16
CONNECTIONS
All connections to the thermostat must be according to
national regulations and installed by authorized electri-
cians.
Power supply to the thermostat must be supplied
through 30mA RCD and overload protected through
max.16A fuses.
TERMINAL NO. DESCRIPTION
1 [L] Power supply
2 [N] Power supply
3 [N1] Load
4 [L1] Load
5 No function
610 kΩ oor sensor
7

17
UKSE NO FI DK DE

18
To install the thermostat and gain access to the 2
mounting screws the front fascia has to be removed.
1. Insert at nose screwdriver into the middle slot in the
bottom and gently press while pulling gently on the
front fascia
2. It is not necessary to disconnect the cable between
the 2 parts, but in case needed – unplug it on the
front fascia. To insert the cable again, be aware to
insert it correctly with the right orientation

19
PRECAUTIONS
• Do not install thermostat in direct sunlight
• Do not install on severely cold outer walls
• If the thermostat is not in the same room as the
heating, only oor sensor can be used
• Install oor sensor min 0,5m from the wall
(cable can be extended with up to 7m, min.
2x0,5mm² cable)
• Do not cover the thermostat, this will cause
overheating
UKSE NO FI DK DE

20