8. TEMPERATURE SETTING OF FREEZING CHAMBER
Press temperature adjusting button of the freezing chamber , the freezing
temperature displaying will blink. Then press the button again to set the temperature, it
will beep when the temperature is adjusted. Temperature setting range is between -16°C
and -24°C. Every time you press the button, the temperature will change 1°C. After
adjusting, the freezing temperature will blink for 5 seconds. New temperature setting will
take effect after panel locked.
9. QUICK FREEZE TIME SETTING
In quick-freeze mode, long press the "FRZ.TEMP" button for 3 seconds,the refrigerating
temperature area will display the existing quick-freeze time,click the "FRZ.TEMP" button
again to set the quick-freeze time, the setting circulates as "26-48-26-48..", lock the panel
or long press the "FRZ.TEMP" button for 3seconds to exit the quick-freeze time setting.
The 48 hours quick- freeze time is mainly for laboratory testing, not recommended for
end-consumers.
10. ICE OFF
Press the button the icon will shine off, this means switching off/on the ice
maker.
11. DISPENSER
Press the button to enter the ice/water selection condition, the selection
circulation will show as “Fetching ice cubes/Fetching crushed ice/Fetching water/none” and
then the corresponding icon on the panel will shine successively.
When the refrigerator is running, the working time of the water tank will be accumulated;
after 150 days the water tank filter cleaning icon will be displayed. When it reaches 180
days, the water tank filter cleaning icon will blink; This means to clean the Water tank filter.
Long press the button for 3s to reset the service time of water tank filter.
After the water tank filter was cleaned, the icon will extinguish.
12. STORAGE UPON POWER FAILURE
In case of power failure, the instant working state will be memorized and maintained till
re-electrification.
13. OPENING WARNING AND ALARM CONTROL
When the refrigerator chamber door gets open, the warning tone will play. If the door is
not closed in two minutes, the buzzer will sound once every second until the door is closed.
14. FAULT INDICATION
The following warnings appearing on the display indicate corresponding faults of the
refrigerator. Though the refrigerator may still have refrigerator and freezing function with
the following faults, the user shall contact a maintenance specialist for maintenance, so as
to ensure normal use of the refrigerator.