Heritage Bathrooms AWG101S User manual

Heritage Soft Close
Thermoset Plastic WC Seat
AWG101S
Fitting Instructions
& Contents List
Please keep these instructions for future reference and request of replacement
part
(HFI AWG101S) (Rev D2.1)
AFTERCARE INSTRUCTIONS
Your fitting has a high quality finish and should be treated with care to
preserve the visible surfaces.
All surface finishes will wear if not cleaned correctly, the only safe way to clean
your product, is to wipe with a soft damp cloth. Stains can be removed using
washing up liquid. All bath cleaning powders and liquids can damage the
surface of your fitting even the non-scratch cleaners.
GUARANTEE
All products are manufactured to the highest standards and a 2-year
guarantee covers any defect in manufacture.
CONTACT DETAILS
If you require further assistance please contact Heritage Sales and
Technical Enquiries:
Sales: 0844 701 8501
Technical: 0844 701 8503
Email: [e-mail]
Website:www.heritagebathrooms.com
Heritage Bathrooms
Unit 6 Albert Road
St Philips Central
Bristol
BS2 0XJ
Before starting any installation project please consider:
Prior to drilling into walls, check there are no hidden electrical
wires, cables or water supply pipes with the aid of an electronic
detector. If you use power tools do not forget:
- Wear eye protection
- Unplug equipment after use
SAFETY
NOTE

Toilet seat fixing instructions.
After care instructions.
Please read carefully before attempting to fit the seat. If you are not the end user,
please make sure the after care instructions are made available for the end user.
1. Before fitting the seat to the pan it is essential that the hinges are adjusted
correctly & the locking screws (L) are firmly tightened using the Allen key provided.
The locking screws are only partially tightened at the factory, so even if the hinge
plate seems tight when you remove the seat from the box, it will still be necessary
to tighten the locking screws. Failure to tighten screws will result in the hinges
working loose over a period of time.
2. Adjust the seat hinges to fit the pan. The seat hinges can be adjusted in 3 ways:
A) By loosening locking screws (L), the hinge plates can be rotated so that the
distance between the fixing bolts can be adjusted.
B) By locating the fixing bolt into one of the threaded holes in the hinge plate
(Diagram A), it is possible to adjust the forward/backward position of the seat.
C) It is possible to get larger adjustment of the forward/backward position by
rotating the hinge plates through 180 . If the seat lid or ring will not stay in the
raised position then move it further forward on the pan.
3. Having adjusted the hinges make sure the locking screws (L) are tight.
4. Place the main seat washers onto the hinge plates, & feed the fixing bolts through
the holes in the pan.
5. Fit rubber washer, metal washer & fixing nut as shown in Diagram B. Secure the
fixing nuts very firmly using a spanner or pliers. Failure to tighten the fixing nuts
securely will result in the seat moving around on the pan. Final adjustment of the
seat position is possible just before the fixing nuts become tight.
The surfaces of this toilet have a very hardwearing finish. The seat should however
be treated with care.
1. Clean surfaces & the hinges weekly with a soft damp cloth & mild soap solution.
2. Do no scrub or scour the surfaces or use abrasive cleaning materials.
3. Do not use bleach or cleaners containing bleach.
4. WARNING - DO NOT stand on the or ring of your toilet seat.
º
If you require further assistance please contact Heritage on the details overleaf.
Diagram A
Hinge Plate Locking Screw (L)
Threaded Holes
Main Seat Washer
Lid
Ring
Toilet Pan
Hinge Plate
Main Seat Washer
Rubber Washer
Metal Washer
Fixing Nut
Fixing Bolt
Diagram B