Heritage Bathrooms THA21 User manual

Instaation Guide
Please keep this booklet for future
reference.
Installer:When you have read these
instructions, please ensure you leave them
with the user.
Models Covered:
Bath Clicker Wastes with
Exposed Overow
THA21
THBB21
THBL21
THBN21
THC21

2
INSTALLATION
(TH__21) Components:
Identify all components are present prior
to installation.
1. Waste Body (x1)
2. Ridged Rubber Washer (x1)
3. Silicone Washer (x1)
4. Flange (x1)
5. Clicker Mechanism (x1)
6. L-Pipe (x1)
7. Overow Face (x1)
8. Ridged Overow Washer (x1)
9. Rubber Washer (x1)
10. Overow Elbow (x1)
11. Conical Washer (x2)
12. Hex Nut (x2)
1. Check the dimensions of your bath to make sure
that the waste assembly will t to your bath. The
L Pipe is a xed length and should not be adjusted.
2. Place the ridged rubber washer (2) on to the waste
body (1) and offer to the underside of the waste hole.
3. Position the silicone washer (3) on to the ange (4)
and secure into the waste body from above; on the
inside of the bath. Screw in the clicker mechanism (5).
4. Place the overow elbow (10) behind the bath, with
the rubber washer (9) in front of it. Secure
in place by screwing the overow face (7) from
the inside of the bath, with the ridged overow
washer (8) behind it.
5. Insert the L Pipe (6) short end rst into the waste
body (1). Ensure a conical washer (11) is at the end of
the tube, and connect to the waste body (1) by
using a hex nut (12).
6. Repeat the process to t the long end of the
L Pipe (6) to the overow elbow (10).
7. Test the clicker mechanism (5) by pressing down
to close, and pressing again to open. Check all
joints and connections for leaks.
70
465
210
G1 ½
ø70
ø26
95°
1
2
3
4
5
6
7
8
9
01
11
12

3
CARING FOR YOUR PRODUCT
GUARANTEE
Heritage products are made from premium materials, with hand polishing, PVD, EPD and
electroplated nishes.
Your product should be regularly cleaned with warm water, a mild pH-neutral liquid soap, and
polished with a soft cloth. Any residues from soap, toiletries etc. should be rinsed off straight
after use.
Household bleaches and cleaners contain harsh chemicals and may damage the surface nish.
Avoid using abrasive cloths, scouring pads, scrub sponges, steel wool or anything similar.
Some surfaces such as nickel and pewter may be affected by the dye found in some cloths, so it is
also important to avoid leaving cloths on surfaces.
The condence we have in the quality of our products and services enables us to offer a free
peace-of-mind product guarantee from 2 years up to a lifetime guarantee against any manufacturing
faults, with proof of purchase. In addition, our attentive customer service team are available to
help solve any problems which may arise quickly and effectively so you can enjoy your bathroom.
To see the specic guarantee for this product, scan the QR Code
or visit the following URL:
https://www.heritagebathrooms.com/service-centre/guarantee
NEED HELP?
In the unlikely event that you encounter a problem with your Heritage product, you must, in the
rst instance, contact the retailer you purchased it from. They will advise as to whether it is due
to a manufacturing fault or an installation fault. If the problem is due to a manufacturing fault, they
will contact us to arrange a supply of a replacement product as soon as possible. To speak to a
Heritage customer service advisor, please contact our technical helpline on 0330 026 8503.

We love to see how Heritage products are used so please keep in
touch and share pictures of your new bathroom with us.
If you have any queries, our dedicated customer service teams and products experts are available to
help.
Email us [e-mail] Call us 0330 026 8503 Website www.heritagebathrooms.com
@heritagebathrooms
UK: Heritage Bathrooms, Pooley Hall Drive, Birch Coppice Business Park, Dordon,Tamworth B78 1SG
EU: Masco Europe S.à.r.l., 14 Rue Strachen, 6933 Mensdorf, Luxembourg.
D11