manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. High Sec Labs
  6. •
  7. Switch
  8. •
  9. High Sec Labs SM20-4 User manual

High Sec Labs SM20-4 User manual

SM20-4SM40-4 SM80-4 | QUICK INSTALLATION GUIDE
©2019 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only. HDC22995 Rev.1.0
Objectives
•This guide includes instructions for installing and basic operation of HSL’s Secure KM Switch SM20-4, SM40-4, SM80-4 devices.
•For further assistance please refer to HSL website: http://www.highseclabs.com
•The following diagram references the SM40-4 device but it is applicable to all devices specified in this manual.
Quick Installation Guide
2/4/8 Ports High Security KM Switches
Installation Precautions:
Do not connect this product to computing
devices that:
•Are TEMPEST computers
•Include telecommunication equipment
WARNING: Peripherals' Warning - For security
reasons, this product does not support
wireless keyboards. It is recommended not to
connect a microphone or headset to the audio
output port.
NOTE: In order to comply with the product’s
Common Criteria evaluation and to prevent
unauthorized administrative access to the
product, the default administrator username
and password must be changed prior to first
product use.
Installation:
•Verify that all computers are turned OFF
prior to connecting them to the product.
•Connect the computers and peripherals to
the HSL KM as shown in the above
diagram.
•It is possible to connect an HSL AFP
(remote control) to the RDC port of these
devices. Please refer to the AFP datasheet
on how to connect it.
•Computer Video Connection
Directly connect a display to each PC.
Multi-Monitor computers might require
driver installation (currently available only
for Windows
http://highseclabs.com/dl.phpfid=446).
•Power ON the PCs: Make sure that the
PCs are turned ON prior to powering ON
the KM.
•Power ON the system: Power ON the KM
by plugging it to the DC wall outlet. By
default, after product power-up, the active
channel will be computer #1, indicated by
the applicable front panel push button LED
lit.
Using the HSL KVM Switch:
Control of the HSL KVM Switch is done,
primarily using the push buttons on the
product front panel.
Switch between computers by pressing the
corresponding front panel button on the KM.
The front panel button of the selected
computer will illuminate.
Important Notes:
1. Anti-Tampering System: This HSL high
security product is equipped with an always-
on active anti-tampering system. If mechanical
intrusion is detected, the product is
permanently disabled and abnormal LED
behavior is activated, with all LEDs blinking
continuously.
2. Power ON Self-Test Procedure: As the
product powers-up, it performs a self-test
procedure. In case of self- test failure for any
reason, including jammed buttons, the
product is inoperable and self-test failure is
indicated by abnormal LED behavior.
In the above-mentioned cases, please call
Technical Support and avoid using the product.
For further information please refer to the
product administrator and setup guides.
SM40-4 Model is shown
Rear Panel Index:
1. HID - Console Keyboard/Mouse
2. PC Keyboard/Mouse inputs
3. Power DC in
4. Remote Desktop Control port (for AFP)
Introduction
Thank you for purchasing this HSL Secure KM Switch. This KM Switch is designed for use in secure defense and intelligence environments across
wide security gaps.
SM20-4SM40-4 SM80-4 | QUICK INSTALLATION GUIDE
©2019 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only. HDC22995 Rev.1.0
Front Panel LEDs :
1. Active PC channel LED
2. Keyboard LEDs Num/CAPS/SCRL
KM LED Indications:
HID LED:
•Off –no device detected
•Flicker –device rejected
•On- device approved
Keyboard LEDs:
•Each LED is ON when the associated
keyboard lock of the active channel
is turned ON
Safety and Regulatory Statements
Safety Symbols
This One or more of the following symbols may be included in your
product documentation and/or on the product.
Instructions: This symbol is intended to alert the user to the
presence of important operating and maintenance (servicing)
instructions in the product user manual.
Dangerous Voltage: This symbol is intended to alert the user
to the presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
Power On: This symbol indicates the principal on/off switch is
in the ON position.
Power Off: This symbol indicates the principal on/off switch is
in the OFF position.
Protective Grounding Terminal: This symbol indicates a
terminal which must be connected to earth ground prior to
making any other connections to the equipment.
Safety Precautions
WARNING: To avoid a potentially fatal shock hazard and possible
damage to equipment, please observe the following precautions.
•Instructions: Do not disable the power grounding plug. The
grounding plug is an important safety feature.
•Plug the power cord into a grounded (earthed) outlet that is easily
accessible at all times.
•Disconnect the power from the product by unplugging the power
cord from either the electrical outlet or the product. The AC inlet
is the main disconnect for removing power to this product. For
products that have more than one AC inlet, to remove power
completely, all AC line cords must be disconnected.
•This product has no serviceable parts inside the product
enclosure. Do not open or remove product cover.
CAUTION: Some HSL products contain a lithium battery. This battery
is not a field replaceable item, and replacement should not be
attempted by a user. If errors occur when using the product and the
battery is suspected, contact HSL Technical Support.
WARNING: For Service Personnel Only - There is a risk of explosion if
the battery is replaced with an incorrect type. Dispose of used
batteries according to the manufacturer’s instructions.
This product is for use with other products that are Listed or
Certified by a Nationally Recognized Testing Laboratory (NRTL).
NIAP Protection Profile
This product is certified to the NIAP Protection Profile PSD version
4.0 certification for peripheral sharing switch devices.
Security Vulnerability
If you are aware of a potential security vulnerability while installing
this product, contact Technical Support immediately by:
•Web form: www.highseclabs.com/support/case/
•Email: security@highseclabs.com
•Tel: +972-4-9591191/2
CAUTION: Anti-tamper Caution - This product is equipped with an
always-on, active anti-tampering system. Any attempt to open the
product enclosure will activate the anti-tamper triggers, rendering
the unit inoperable and voiding its warranty.
WARNING: Unit Enclosure Warning - If the unit’s enclosure appears
disrupted or if all LEDs flash continuously, remove the product from
service immediately and contact Technical Support.
Change Management
For change management tracking, perform a quarterly log check to
verify that the RFD was not improperly used to override the current
device policy by an unauthorized person.

This manual suits for next models

2

Other High Sec Labs Switch manuals

High Sec Labs SC42PHU-4 User manual

High Sec Labs

High Sec Labs SC42PHU-4 User manual

High Sec Labs SM20N-4 User manual

High Sec Labs

High Sec Labs SM20N-4 User manual

High Sec Labs SK21D-3 User manual

High Sec Labs

High Sec Labs SK21D-3 User manual

High Sec Labs SC21H-N User manual

High Sec Labs

High Sec Labs SC21H-N User manual

High Sec Labs SM20N-3 User manual

High Sec Labs

High Sec Labs SM20N-3 User manual

High Sec Labs DK22D-N User manual

High Sec Labs

High Sec Labs DK22D-N User manual

High Sec Labs SC42DU-3 User manual

High Sec Labs

High Sec Labs SC42DU-3 User manual

High Sec Labs SX42 U-3 Series User manual

High Sec Labs

High Sec Labs SX42 U-3 Series User manual

High Sec Labs K404F User manual

High Sec Labs

High Sec Labs K404F User manual

High Sec Labs SX22H-M User manual

High Sec Labs

High Sec Labs SX22H-M User manual

High Sec Labs SX22D-N User manual

High Sec Labs

High Sec Labs SX22D-N User manual

High Sec Labs Mini-Matrix SX42PH-4 User manual

High Sec Labs

High Sec Labs Mini-Matrix SX42PH-4 User manual

High Sec Labs SC21H-M User manual

High Sec Labs

High Sec Labs SC21H-M User manual

High Sec Labs SK41 N Series User manual

High Sec Labs

High Sec Labs SK41 N Series User manual

High Sec Labs DK22D-3 User manual

High Sec Labs

High Sec Labs DK22D-3 User manual

High Sec Labs Mini-Matrix SX22H-3 User manual

High Sec Labs

High Sec Labs Mini-Matrix SX22H-3 User manual

High Sec Labs SK21PH-4 User manual

High Sec Labs

High Sec Labs SK21PH-4 User manual

High Sec Labs SK21D-3 User manual

High Sec Labs

High Sec Labs SK21D-3 User manual

High Sec Labs SK21P-3 User manual

High Sec Labs

High Sec Labs SK21P-3 User manual

High Sec Labs K204 User manual

High Sec Labs

High Sec Labs K204 User manual

High Sec Labs SC42PHU-N User manual

High Sec Labs

High Sec Labs SC42PHU-N User manual

High Sec Labs SM20N-3 User manual

High Sec Labs

High Sec Labs SM20N-3 User manual

High Sec Labs SC21H-4 User manual

High Sec Labs

High Sec Labs SC21H-4 User manual

High Sec Labs SM40N-4 User manual

High Sec Labs

High Sec Labs SM40N-4 User manual

Popular Switch manuals by other brands

Meicheng CHMX-44 Operation manual

Meicheng

Meicheng CHMX-44 Operation manual

Dell Force10 S55 manual

Dell

Dell Force10 S55 manual

NK TECHNOLOGIES DS3 Series instructions

NK TECHNOLOGIES

NK TECHNOLOGIES DS3 Series instructions

Extron electronics System 8/10 Plus user manual

Extron electronics

Extron electronics System 8/10 Plus user manual

iNels RFSAI-11B-SL manual

iNels

iNels RFSAI-11B-SL manual

Electro-Voice 367 engineering data

Electro-Voice

Electro-Voice 367 engineering data

LevelOne GSW-1674T user guide

LevelOne

LevelOne GSW-1674T user guide

VERIS INDUSTRIES, INC. Hawkeye 806 installation guide

VERIS INDUSTRIES, INC.

VERIS INDUSTRIES, INC. Hawkeye 806 installation guide

QUANTA T3048-LY2 installation guide

QUANTA

QUANTA T3048-LY2 installation guide

hager HXE030H User instructions

hager

hager HXE030H User instructions

HPE FlexNetwork 10500 SERIES Configuration guide

HPE

HPE FlexNetwork 10500 SERIES Configuration guide

Strand Lighting 96250 Installation & user guide

Strand Lighting

Strand Lighting 96250 Installation & user guide

HPE FlexFabric 5940 SERIES Fundamentals Command Reference

HPE

HPE FlexFabric 5940 SERIES Fundamentals Command Reference

Icron Icron WiRanger user guide

Icron

Icron Icron WiRanger user guide

QOLSYS IQ Power Switch-PG installation guide

QOLSYS

QOLSYS IQ Power Switch-PG installation guide

Supermicro SSE-G48-TG4 Quick configuration guide

Supermicro

Supermicro SSE-G48-TG4 Quick configuration guide

Exsys EX-62025 manual

Exsys

Exsys EX-62025 manual

Westermo U200 series installation guide

Westermo

Westermo U200 series installation guide

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.