High Sec Labs SC42DU-3 User manual

Secure KVM Combiner
SC21H3 · SC42DU/DHU/PHU3 | QUICK SETUP GUIDE
Models:
SC21H-3 – Secure 2-Port HDMI Video KVM Combiner, PP 3.0
SC42DU-3 – Secure 4P to 2P DVI Video KVM Combiner w/fUSB
SC42DHU-3 – Secure 4P DVI to 2P HDMI Video KVM Combiner w/fUSB
SC42PHU-3 – Secure 4P DP/HDMI to 2P HDMI Video KVM Combiner w/fUSB HDC14468 Rev. 1.0

1
HSL Secure KVM Combiner Quick Setup Guide
TABLE OF CONTENTS
SECTIONS
Table of Contents 1 2 3 4
Introduction .......................................................... 2
HSL Secure KVM Combiner....................................................2
Installation............................................................ 3
Installing the Combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Step 1 – Cable Installation.....................................................3
Step 2 – Combiner Setup Overview ...........................................4
Step 3 – Power ON the Combiner .............................................5
Step 4 – Configure Display Output ............................................6
Step 5 – Working with Dual Displays ..........................................8
Step 6 – Reset to Factory Defaults.............................................9
Operation............................................................ 10
Operating the Combiner .....................................................10
Step 1 – Operation Modes Overview.........................................10
Step 2 – View Modes Overview ..............................................11
Step 3 – Toggling Options ...................................................12
Step 4 – Complete toggling options table ...................................14
Step 5 – Customize Channel Window Layout ............................... 20
Combiner Cascading .................................................26
Introduction .................................................................26
Cascading Setup Scheme ....................................................27

2
HSL Secure KVM Combiner Quick Setup Guide
INTRODUCTION
SECTIONS
Table of Contents 2 3 41
HSL Secure KVM Combiner
Interact with multiple computers presented on the same display at the
same time using a single set of USB, audio, keyboard, video and mouse
peripherals.
The KVM Combiner switch offered by HSL provides increased
productivity in challenging multi-computer environments where users
are required to view and interact with several computers at the same
time while maintaining the highest isolation between computers and
peripherals.
This guide instructs how to install, configure and operate a HSL KVM
Combiner.

3
HSL Secure KVM Combiner Quick Setup Guide
INSTALLATION
SECTIONS
Table of Contents 1 3 42
Installing the Combiner
Step 1 – Cable Installation
1. Connect console port peripherals:
•Connect video, keyboard, mouse and audio peripherals to the
combiner’s console ports. These will be shared securely between
all computers.
•Connect a smartcard/biometric reader to the combiner’s console
fUSB secure port to support user authentication across multiple
isolated computers.
Note: For optimum compatibility use the supplied 5-button mouse with the
combiner’s console port.
2. Computer channel ports:
•For each PC, connect the video, keyboard, mouse, fUSB and audio
cables to the combiner’s computer ports.
Smart-Card
Reader Computers
CONSOLE PORTS COMPUTER/SOURCE PORTS
fUSB Cable
Audio Cable
Mouse Cable
Display Cable
Keyboard Cable
Audio Keyboard Mouse
1 2 3 4
Secondary DisplayPrimary Display
Note: 4 channel product illustrations shown throughout this manual are
applicable to other KVM Combiner models.

4
HSL Secure KVM Combiner Quick Setup Guide
INSTALLATION
SECTIONS
Table of Contents 1 3 42
Step 2 – Combiner Setup Overview
The Setup Menu: accessible through the lower left screen corner
allows configuring various system settings, such as, output resolution,
screen duplication, cursor color and more.
Setup Menu Description:
1Main Admin Menu: select which setting to configure (system
settings / channel settings).
2Channel Settings: set the screen resolution and frame color of the
selected channel number.
3System Settings: Change display output resolution, screen
duplication, frame border width, operation-taskbar size and system
cursor type.
Channel 1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
System
Channel 1
Channel 2
Channel 3
Channel 4
2
1
3
Note: 4 channel product illustrations shown throughout this manual are
applicable to other KVM Combiner models.

5
HSL Secure KVM Combiner Quick Setup Guide
INSTALLATION
SECTIONS
Table of Contents 1 3 42
Step 3 – Power ON the Combiner
•Turn ON all the PCs.
•Connect the power supply and power ON the combiner
(approximate boot time is 30 seconds).
•The combiner boots into Tile view-mode,
where all sources are presented equally on the
screen.
Note: In case no picture is presented after
powering ON the combiner, connect an alternate
display to the combiner’s display console port, or
perform a reset to factory default.
Multiple Sources
Speakers
Single
Keyboard & Mouse
SECURE
KVM COMBINER
SECURE
KVM COMBINER
PC #4
PC #3
PC #1
PC #2
Move mouse
to switch PCs
Note: 4 channel product illustrations shown throughout this manual are applicable
to other KVM Combiner models.

6
HSL Secure KVM Combiner Quick Setup Guide
INSTALLATION
SECTIONS
Table of Contents 1 3 42
Step 4 – Configure Display Output
Important Notes:
1. It is highly recommended to use the same screen resolution settings
across all levels as described below.
#1 #2
#3 #4
#1 #2
#3 #4
Output Resolution (Match Monitor Resolution)
Channel Resolution (Match PC Resolution)
Computer Resolution = (Windows/Linux/Mac OS Screen Resolution)
Use the same screen resolution across all level
2. Selecting a resolution that is not supported by your screen will
result in a blank display which might require connecting a monitor
that supports the selected resolution or resetting the combiner to
factory default.
3. For working with dual displays, please refer to the appendix.
View applications in Ultra High Definition (UHD) 4K video quality.
•Never compromise on video quality.
•Run graphic-intensive, ultrahigh definition
applications on all combiner models.
•Upscale source computers input to UHD 4K output.
Ultra HD

7
HSL Secure KVM Combiner Quick Setup Guide
INSTALLATION
SECTIONS
Table of Contents 1 3 42
•Enter System mode: type: { CTRL | CTRL | o }. When active, an
operation taskbar appears at the bottom of the screen.
•Set Output Resolution:
on the lower left screen corner
click Setup -> System ->
Output Resolution and
select the screen resolution
that matches your display (for
example: 1920x1080).
Notes:
1. Keyboard shortcut keys are to be pressed sequentially
2. CTRL key refers to LEFT CTRL key.
`
~
1
!
2
@
3
#
4
$
5
%
6
^
7
&
8
*9
(
0
)
-
_
=
+
Tab Q W E R T Y U I O P [
{
]
}
Caps A S D F G H J K L :
;‘
“
Shift
CtrlCtrl Alt Alt
Delete
Enter
\
|
Shift
Ctrl
é
çêè 0
123
456
789-
+
Num
Lock
Enter
=/*
,
Insert
Delete
Home
End
Page
UP
Page
Down
Z X C V B N M ?
/
>
.
<
,
•Set Channel Resolution:
Click Setup -> Channel# and select
the screen resolution for the selected
channel number (for example:
1920x1080).
•Set Computer
Resolution:
Under the computer’s
operating system
settings set the screen
resolution to match
the Output & Channel
resolution (for example:
1920x1080).
Set output resolution

8
HSL Secure KVM Combiner Quick Setup Guide
INSTALLATION
SECTIONS
Table of Contents 1 3 42
Step 5 – Working with Dual Displays
Connecting two displays to the combiner’s console output ports allows
working in Extended or Duplicate mode.
Note: Skip this section if your combiner model does not support dual screens
or you’ve connected only one display.
•Set Screen Duplication Mode: click
Setup -> System -> Output Resolution
and select Duplicate Displays.
In screen duplication mode
all incoming sources are
presented on the primary
display which is duplicated to
a second display. This layout
is ideal for meeting / control
rooms and big screen TV
projection scenarios.
Primary Secondary
2
Channel1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
34
12
Channel1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
34
1
“Duplicate” in Tile Mode
Channel1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
1
2
3
4
Channel1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
1
2
3
4
Primary Secondary
“Duplicate” in Scale Mode
•Set Screen Extending Mode: click Setup -> System -> Output
Resolution and select Extend Displays.
In extended view mode the incoming channel presentation is split
between two displays.
2
Channel1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
4
Channel1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
3
1
Primary Secondary
“Extend” in Tile Mode
Channel1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
1
2
Channel1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
3
4
Primary Secondary
“Extend” in Scale Mode

9
HSL Secure KVM Combiner Quick Setup Guide
INSTALLATION
SECTIONS
Table of Contents 1 3 42
Step 6 – Reset to Factory Defaults
Reset to factory defaults clears the device settings and restores the
device to its original configuration.
•System reset: Clears behavioral characteristics such as mouse
settings and display presets. Type { L CTRL | L CTRL | F11| r } key
combination.

10
HSL Secure KVM Combiner Quick Setup Guide
OPERATION
SECTIONS
Table of Contents 1 2 43
Operating the Combiner
Step 1 – Operation Modes Overview
Operation modes determine the device state.
In System mode combiner settings can be modified, the mouse is
not passed-through to the source computers and the user can toggle
between various channels and view layout modes (Scale/Tile/Custom)
using the operation-taskbar, a mouse click, keyboard shortcuts or touch
screen gestures. In system mode the user can’t interact with the source
computers.
•System mode taskbar & mouse: an operation-taskbar appears
at the bottom of the screen and the mouse cursor is set to System
mode (appears in blue).
•System mouse functionality: the mouse is used for operation-
purposes, such as, changing channels, toggling between view modes,
entering the setup...etc. It can’t be used for interacting with sources.
•Setup menu: accessible through the lower left screen corner. Allows
configuring various system settings, such as, output resolution,
screen duplication, cursor color and more.
•Operation-taskbar:
–Toggle between channels by clicking on a channel number.
–Toggle between view modes by clicking Scale/Tile/Custom
menu buttons.
–Save custom screen layouts as presets by long-pressing the
1/2/3 buttons.
In User mode the user can simultaneously interact with multiple
source computers at the same time using a single set of keyboard and
mouse. The user can toggle between various channels and view layout
modes (Scale/Tile/Custom) using a mouse click, keyboard shortcuts or
touch screen gestures.
•Cursor Navigation (Virtual Display Technology - VDT): With
cursor navigation the user can move from one highly isolated
computer system to another by simply moving the mouse cursor
across display borders. No need to push any buttons. Audio and
keyboard follow mouse as cursor crosses display borders.
Notes:
1. A complete list of toggling options is described further in this document.
2. When VDT is disabled and the combiner is set to User mode, the mouse cursor will not move between screen boarders. To change sources, use toggling options.

11
HSL Secure KVM Combiner Quick Setup Guide
OPERATION
SECTIONS
Table of Contents 1 2 43
Step 2 – View Modes Overview
View modes determine how multiple sources are presented on the
combiner’s screen. Toggle between view modes in a mouse click, using
keyboard shortcuts or touch screen gestures.
•Tile View mode: In Tile mode all sources are spread equally on the
screen, the user can independently interact with each source and
enlarge any given source to maximum screen size by clicking on it.
Channel 1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
34
21
Channel 1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
34
2
1
Click to Enlarge
•Scale View mode: In Scale mode the user can interact with all
sources while one source is enlarged and others are aligned vertically
on the right screen side. Switch between the enlarged sources by
clicking on any of the aligned sources on the right.
Channel 1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
1
2
3
4
Channel 1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
2
1
3
4
Click to Enlarge
•Custom View mode: Custom views allow rearranging, positioning
and saving screens as needed by the user for future work.
Channel 1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
12
3
4
Channel 1Setup Channel 2 Channel 3 Channel 4 1 2 3 ? Scale Tile
21
3
4
Rearrange and Position screens as you want
2.1 Active Source
Active source is the source that has current access to the combiner’s
peripherals (keyboard, mouse, audio and authentication-device).
The user can select which source will be active in various ways including
a mouse click, keyboard shortcuts, touch screen gestures and by using
the combiner’s front panel push buttons.

12
HSL Secure KVM Combiner Quick Setup Guide
OPERATION
SECTIONS
Table of Contents 1 2 43
Step 3 – Toggling Options
Once you have connected all the sources and completed the initial
steps, you can start working with the combiner. The next section
explains how to switch between operation modes and operate the
combiner using its versatile view and control options.
Important Notes:
1. A complete list of toggling options is described further in this document.
2. Always use the left control key (CTRL) unless otherwise specified.
3. Do not use the numeric keypad for toggling shortcuts unless otherwise
specified.
4. ALL KEYBOARD SHORTCUTS REFER TO QWERTY KEYBOARDS. In case a non-
qwerty keyboard is in use, keep using the QWERTY layout. For example,
in AZERTY keyboard, where the letter A is equivalent to the location of
the letter Q on a QWERTY keyboard, type { CTRL | CTRL | a } to switch to
tile view.
Most useful toggling options:
#Action
Description Keyboard Mouse
1
Toggle between
System / User
modes
(system) - CTRL | CTRL | o
(user) - CTRL | CTRL | u
Click the side-mouse
button to toggle between
System / User modes.
2Switch between
Tile / Scale Views
(Tile) - CTRL | CTRL | q
(Scale) - CTRL | CTRL | s
1. Click the side-mouse
button to toggle to
System mode.
2. In System mode: Click
“Tile” or “Scale” on the
operation-taskbar.
3
Enable /
Disable Cursor
Navigation VDT
(enable) - CTRL | CTRL | F11 | c
(disable) - CTRL | CTRL | F11 | b N/A
4Enlarge a source
to full screen CTRL | CTRL | f
1. In System mode, Tile
view: Double click
any tile.
2. In System mode, Scale
view: Double click on
the enlarged window.
5
Go back to last
layout before
enlarging to full
screen
CTRL | CTRL | z
1. Click the side-mouse
button to toggle to
System mode.
2. Click Scale / Tile /
Custom buttons on the
operation-taskbar.

13
HSL Secure KVM Combiner Quick Setup Guide
OPERATION
SECTIONS
Table of Contents 1 2 43
Most useful toggling options (Cont.):
#Action
Description Keyboard Mouse
6
Resize channel
& content
simultaneously*
* First, switch to
System mode,
Tile view.
Select a channel -
CTRL | CTRL | Channel# (1-16)
Reduce scaling -
CTRL | CTRL | “-“
Increase scaling -
CTRL | CTRL | “+“
Note: use the “-“ and “=”
keys instead of the numeric
pad keys.
1. Click to select a channel.
2. Press and hold the side
mouse button & scroll
the mouse wheel to
reduce/increase scaling.
3. For fast scaling hold the
left CTRL
7 System Reset to
factory defaults CTRL | CTRL | F11 | r
Notes:
1. Keyboard shortcut keys are to be pressed sequentially.
2. CTRL key refers to LEFT CTRL key.
`
~
1
!
2
@
3
#
4
$
5
%
6
^
7
&
8
*9
(
0
)
-
_
=
+
Tab Q W E R T Y U I O P [
{
]
}
Caps A S D F G H J K L :
;‘
“
Shift
CtrlCtrl Alt Alt
Delete
Enter
\
|
Shift
Ctrl
é
çêè 0
123
456
789-
+
Num
Lock
Enter
=/*
,
Insert
Delete
Home
End
Page
UP
Page
Down
Z X C V B N M ?
/
>
.
<
,

14
HSL Secure KVM Combiner Quick Setup Guide
OPERATION
SECTIONS
Table of Contents 1 2 43
Step 4 – Complete toggling options table
Toggle between view modes in a mouse click, using keyboard shortcuts or touch screen gestures.
# Action / Mode Keyboard Mouse Touch Screen
1 Enter System Mode CTRL | CTRL | o Click the side-mouse button to toggle between
System / User modes.
1. In Scale view: Tap 4 times on the enlarged
window.
2. In Tile view: Touch and hold the uppermost
right corner of the screen for 4 seconds.
2Enter User Mode CTRL | CTRL | u Click the side-mouse button to toggle between
System / User modes.
1. In Tile view: Tap 4 times on the uppermost
right corner of the screen.
2. In Scale view: Tap 4 times on the enlarged
screen.
3 Switch to Tile View CTRL | CTRL | q
1. Click the side-mouse button to toggle
between System / User modes.
2. In System mode: Click “Tile” on the operation-
taskbar.
1. In Scale view, User mode: Tap 4 times on
the enlarged window.
2. In Scale view, System mode: Tap 4 times on
the enlarged window to switch to User mode,
then tap 4 times (again).
4 Switch to Scale View CTRL | CTRL | s
1. Click the side-mouse button to toggle
between System / User modes.
2. In System mode: Click “Scale” on the operation-
taskbar.
1. In Tile view, User mode: Touch and hold
the uppermost right corner of the screen for
4 seconds.
2. In Tile view, System mode: Tap “Scale” on
the operation-taskbar.
5
View Custom Presets
Note: read “Save custom views as
presets” section first.
CTRL | CTRL | F1-F4
1. Click the side-mouse button to toggle
between System / User modes.
2. In System mode: Click 1/2/3 buttons on the
operation-taskbar.
N/A
(Custom Tile Preset can be viewed by clicking
“Tile” on the operation-taskbar)

15
HSL Secure KVM Combiner Quick Setup Guide
OPERATION
SECTIONS
Table of Contents 1 2 43
# Action / Mode Keyboard Mouse Touch Screen
6
Enable Cursor Navigation VDT
Note: allow 10 seconds delay after
enabling for the 1st time.
CTRL | CTRL | F11 | c N/A N/A
7 Disable Cursor Navigation VDT CTRL | CTRL | F11 | b N/A N/A
8
Change Active Source
Note: sources can also be switched
by using the combiner’s front panel
push buttons.
CTRL | CTRL | Channel#
(1-16)
In System mode:
Click the channel window.
or Click the channel number on the operation-
taskbar.
or Scroll the mouse wheel.
In User mode (with VDT ON):
Move mouse cursor across display boarders.
Touch the channel’s screen area.
9 Enlarge a source to full screen CTRL | CTRL | f
In System mode, Tile view: Double click any tile.
In System mode, Scale view: Double click on the
enlarged window.
In User mode, Tile view: Tap 4 times on any tile.
In System mode, tile view: Tap 4 times on any
tile to switch to User mode, then tap 4 times
(again) on any tile.
10 Go back to last layout before
enlarging to full screen CTRL | CTRL | z
1. Click the side-mouse button to toggle to
System mode.
2. Click Scale / Tile / Custom buttons on the
operation-taskbar.
Tap 4 times anywhere on the screen.
11
Presentation mode ON; Enlarge each
channel to full screen when changing
active source using 5.6
CTRL | CTRL | Channel# (1-16)
CTRL | CTRL | p N/A N/A
12 Presentation mode OFF 5.6 CTRL | CTRL | n N/A N/A
5.6 This action is explained in detail using a step by step description ahead.

16
HSL Secure KVM Combiner Quick Setup Guide
OPERATION
SECTIONS
Table of Contents 1 2 43
# Action / Mode Keyboard Mouse Touch Screen
13
Resize channel5.1
1. First, switch to System mode, Tile
view.
2. See Actions 13a / 13b
N/A
1. Click to select a channel.
2. Place the mouse cursor at the channel’s lower
right corner.
3. Press and hold the right mouse button and
drag the channel’s screen to resize.
Tap and hold the lower right corner of a specific
channel and drag to resize.
13a
Fit content to newly resized channel
area while keeping aspect ratio
* First, resize channel.
CTRL | CTRL | w N/A N/A
13b
Fit content to newly resized channel
area without keeping aspect ratio
* First, resize channel.
CTRL | CTRL | y N/A N/A
14
Resize channel & content
simultaneously5.2
* First, switch to System mode, Tile
view.
1. Select a channel
CTRL | CTRL | Channel#
(1-16)
2. Reduce scaling
CTRL | CTRL | “-“
3. Increase scaling
CTRL | CTRL | “+“
Note: use the “-“ and
“=” keys instead of the
numeric pad keys.
1. Click to select a channel.
2. Press and hold the side mouse button & scroll
the mouse wheel to reduce/increase scaling.
3. For fast scaling hold the left CTRL
Tap and hold the midpoint of the vertical or
horizontal channel border and drag to scale.
* This action is explained in detail using a step by step description ahead.

17
HSL Secure KVM Combiner Quick Setup Guide
OPERATION
SECTIONS
Table of Contents 1 2 43
# Action / Mode Keyboard Mouse Touch Screen
15
Drag & rearrange channel windows5.3
* First, switch to System mode,
Tile view.
N/A
1. Click to select a channel.
2. Press and hold the left mouse button and drag
the channel window.
Tap and hold the upper left corner of a channel
and drag the window.
16
Save custom views as presets5.4
1. First, switch to System mode,
Tile view.
2. Rearrange channel windows
layout.
N/A On the operation-taskbar, long press the “1” or “2”
or “3” button for 3 seconds to save your preset. N/A
17 View custom presets* CTRL | CTRL | F1-F3 1. First, switch to System mode, Tile view.
2. Click 1/2/3 buttons on the operation-taskbar. N/A
18
Save a custom tile preset5.4
1. First, switch to System mode,
Tile view.
2. Rearrange channel windows
layout.
N/A On the operation-taskbar, long press the “Tile”
button for 3 seconds to save your preset. N/A
19 View custom tile5.4 CTRL | CTRL | F4 1. First, switch to System mode, Tile view.
2. Click the “Tile” button.
1. First, switch to System mode, Tile view.
2. Tap on “Tile” button on the operation-taskbar.
* This action is explained in detail using a step by step description ahead.

18
HSL Secure KVM Combiner Quick Setup Guide
OPERATION
SECTIONS
Table of Contents 1 2 43
# Action / Mode Keyboard Mouse Touch Screen
20 Dual Screen
Duplicate Screens (On/Off) CTRL | CTRL | F11 | l
21
Dual Screen
Duplicate Primary
Project primary display on both
displays
CTRL | CTRL | F11 | j | j N/A N/A
22
Dual Screen
Duplicate Secondary
Project secondary display on both
displays
CTRL | CTRL | F11 | k | k N/A N/A
23
Dual Screen
Switch Positions
Switch position between primary and
secondary displays
CTRL | CTRL | F11 | k | j
CTRL | CTRL | F11 | j | k N/A N/A
* This action is explained in detail using a step by step description ahead.

19
HSL Secure KVM Combiner Quick Setup Guide
OPERATION
SECTIONS
Table of Contents 1 2 43
# Action / Mode Keyboard Mouse Touch Screen
24 Freeze channel layer5.5 CTRL | CTRL | F11| F | (1-16) N/A N/A
25 Enable Right CTRL
Toggles between the left & right CTRL
keys for system commands
L CTRL | L CTRL | F11| i N/A Once enabling the Right CTRL, touch screen
gestures switch to the Left screen side. For
example, touch and hold the upper left screen
corner to switch from Tile view, user mode to
Scale view.
26 Enable Left CTRL
Toggles between the right CTRL keys
for system commands
R CTRL | R CTRL | F11| i N/A N/A
27 Disable front panel and DCU
Disable/Enable the front panel push
buttons and DCU functionality.
Once disabled, switching channels is
only functional through mouse and
keyboard shortcuts.
CTRL | CTRL | F11 | e N/A N/A
28 Reset to factory default CTRL | CTRL | F11| r N/A N/A
* This action is explained in detail using a step by step description ahead.