HighPoint SSD6200 Series User manual

1
SSD6204
4x M.2 Port to PCIe 3.0 x8 NVMe RAID Controller
SSD6204
Quick Installation Guide
V1.00

2
System Requirements
PC Requirements
•System with a free PCIe 4.0/3.0 x16 or PCIe 4.0/3.0 x8 slot
•Windows
•Linux
•VMware
SSD6204 Kit Content
•SSD6204 Controller Card
•Quick Installation Guide

3
SSD6204 Hardware
Front View
Heat sink for M.2 SSD’s
PCIe 3.0 x8 Host Interface

4
SSD6204 Hardware Installation:
Step 1. On the rear of the SSD6204, remove the six screws that secure
the unit’s heat sink to the PCB.
After removing the screws, carefully remove the heat sink from
the SSD6204.
Step 2. These 4 screws are used to install the NVMe SSD’s.
Step 3. Please remove the screws on the right side of SSD6204.Gently
insert the SSD into the slot.

5
Step 4. Refasten the screw to secure the SSD.
Step 5. Repeat Steps 3 to 5 to install the remaining SSDs.
The following example shows four NVMe SSD’s installed into
Port 1, 2, 3 & 4;
Step 6. Carefully align the heat sink and refasten the 6 screws that were
removed in step 1 to the rear of the PCB.

6
Resources
We recommend visiting the SSD6200 series webpage for the latest
software and installation guides
Software Download:
https://highpoint-tech.com/USA_new/series-ssd6200-overview.html
Customer Support
If you encounter any problems while utilizing the SSD6204, or have
any questions about this or any other HighPoint Technologies, Inc.
product, feel free to contact our Customer Support Department.
Web Support:
https://www.highpoint-tech.com/websupport/main.php
HighPoint Technologies, Inc. websites:
https://www.highpoint-tech.com
© Copyright 2020 HighPoint Technologies, Inc. All rights reserved.