HIK VISION DS-k2210 User manual

Main Elevator Controller
User Manual

Main Elevator Controller User Manual
i
User Manual
© 2019 Hangzhou Hikvision Digital Technology Co., Ltd.
This manual is applied for main elevator controller.
Name
Model
Main Elevator Controller
DS-K2210
It includes instructions on how to use the Product. The software embodied in the Product is
governed by the user license agreement covering that Product.
About this Manual
This Manual is subject to domestic and international copyright protection. Hangzhou Hikvision
Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This manual cannot be
reproduced, changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision and are registered
trademarks or the subject of applications for the same by Hikvision and/or its affiliates. Other
trademarks mentioned in this manual are the properties of their respective owners. No right of
license is given to use such trademarks without express permission.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS MANUAL.
HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE
USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY OF INFORMATION
CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE
WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Support
Should you have any questions, please do not hesitate to contact your local dealer.

Main Elevator Controller User Manual
ii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS
Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collection points. For more information see:
www.recyclethis.info

Main Elevator Controller User Manual
iii
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
Use only power supplies listed in the user instructions:
Model
Manufacturer
Standard
C2000IC12.0-24P-DE
MOSO Power Supply Technology Co., Ltd.
CEE
C2000IC12.0-24P-GB
MOSO Power Supply Technology Co., Ltd.
BS
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger
or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
All the electronic operation should be strictly compliance with the electrical safety regulations,
fire prevention regulations and other related regulations in your local region.
Please use the power adapter, which is provided by normal company. The power consumption
cannot be less than the required value.
Do not connect several devices to one power adapter as adapter overload may cause over-heat
or fire hazard.
Please make sure that the power has been disconnected before you wire, install or dismantle
the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
Warnings Follow
these safeguards to
prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.

Main Elevator Controller User Manual
iv
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the device yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cautions
Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or places
subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specification of the device for the detailed
operating temperature), cold, dusty or damp locations, and do not expose it to high
electromagnetic radiation.
The device cover for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation or heat source such as heater or
radiator is forbidden (ignorance can cause fire danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor at the
same time.
Please use the provided glove when open up the device cover, avoid direct contact with the
device cover, because the acidic sweat of the fingers may erode the surface coating of the device
cover.
Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do
not use alkaline detergents.
Please keep all wrappers after unpack them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage on the device and lead to additional costs.
Improper use or replacement of the battery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used batteries according to the instructions provided by
the battery manufacturer.

Main Elevator Controller User Manual
v
Table of Contents
Chapter 1 Overview.................................................................................................................8
1.1 Introduction .........................................................................................................................8
1.2 Main Features ......................................................................................................................8
Chapter 2 Appearance .............................................................................................................9
2.1 Device Appearance Introduction .........................................................................................9
2.2 Indicator Information .........................................................................................................10
Chapter 3 Installation ............................................................................................................11
Chapter 4 Device Wiring ........................................................................................................12
Chapter 5 Activation..............................................................................................................14
5.1 Activating via Web Client ...................................................................................................14
5.2 Activating via SADP Software .............................................................................................14
5.3 Activating via Client Software ............................................................................................16
Chapter 6 Web Client Operation ............................................................................................19
6.1 Overview ............................................................................................................................19
6.1.1 Introduction ...................................................................................................................19
6.1.2 Running Environment.....................................................................................................19
6.2 Login/Logout Web Client....................................................................................................19
6.2.1 Login...............................................................................................................................19
6.2.2 Logout ............................................................................................................................20
6.3 Setting Device via Web Client ............................................................................................20
6.3.1 System Settings ..............................................................................................................20
6.3.2 Network Settings............................................................................................................22
6.3.3 System Maintenance......................................................................................................23
6.3.4 Elevator Control Settings................................................................................................24
Chapter 7 Client Operation ....................................................................................................28
7.1 User Registration and Login ...............................................................................................28
7.2 System Configuration .........................................................................................................29
7.3 Access Control Management .............................................................................................29
7.3.1 Adding Access Control Device ........................................................................................30
7.3.2 Viewing Device Status....................................................................................................45
7.3.3 Editing Basic Information ...............................................................................................46
7.3.4 Network Settings............................................................................................................47
7.3.5 RS-485 Settings...............................................................................................................49
7.3.6 Remote Configuration ....................................................................................................50

Main Elevator Controller User Manual
vi
7.4 Organization Management ................................................................................................55
7.4.1 Adding Organization.......................................................................................................55
7.4.2 Modifying and Deleting Organization ............................................................................55
7.5 Person Management..........................................................................................................55
7.5.1 Adding Person ................................................................................................................56
7.5.2 Managing Person............................................................................................................66
7.5.3 Issuing Card in Batch ......................................................................................................66
7.6 Schedule and Template ......................................................................................................68
7.6.1 Week Schedule...............................................................................................................69
7.6.2 Holiday Group ................................................................................................................70
7.6.3 Template.........................................................................................................................71
7.7 Permission Configuration...................................................................................................73
7.7.1 Adding Permission.......................................................................................................... 74
7.7.2 Applying Permission.......................................................................................................75
7.8 Advanced Functions ...........................................................................................................76
7.8.1 Access Control Parameters.............................................................................................76
7.8.2 Card Reader Authentication...........................................................................................78
7.8.3 Open Door with First Card .............................................................................................80
7.8.4 Relay Settings .................................................................................................................81
7.9 Searching Access Control Event .........................................................................................84
7.9.1 Searching Local Access Control Event ............................................................................85
7.9.2 Searching Remote Access Control Event........................................................................85
7.10 Access Control Event Configuration ...................................................................................86
7.10.1 Access Control Event Linkage .....................................................................................86
7.10.2 Event Card Linkage .....................................................................................................87
7.10.3 Cross-Device Linkage..................................................................................................89
7.11 Door Status Management ..................................................................................................91
7.11.1 Access Control Group Management ..........................................................................91
7.11.2 Controlling Floor Status..............................................................................................93
7.11.3 Status Duration Configuration ...................................................................................94
7.11.4 Real-time Card Swiping Record ..................................................................................95
7.11.5 Real-time Access Control Alarm.................................................................................96
7.12 Arming Control...................................................................................................................98

Main Elevator Controller User Manual
vii
Updated
Optimize the NTP and DST function.
Support connecting to fingerprint and card reader.
Get the armed device IP address via the client software.
If swiping card when the door is in sleep mode, the authentication will be failed and the client
software will receive the event.
If swiping card when the card reader is in sleep mode, the authentication will be failed and the
client software will receive the event.
Optimize card effective date format
Optimize relay time
Add IP addresses conflicted alarm

Main Elevator Controller User Manual
8
Chapter 1 Overview
1.1 Introduction
The elevator controller contains main elevator controller and distributed elevator controller. It can
be applied to buildings, public areas and so on. The main elevator controller can communicate with
the distributed elevator controller, the card reader, the video intercom devices, etc. via RS-485. You
can also control the main elevator controller by the web client, guarding expert access control
client software and other systems.
1.2 Main Features
TCP/IP communication, Wiegand communication and RS-485 communication
Manages the distributed elevator controller via the RS-485 connection
Manages the video intercom device via the RS-485 connection
Connection of the fire alarm button, the panic button and the maintenance button
Connectable with up to 24 distributed elevator controllers
Multiple authentication modes: Card, Fingerprint, Card and Fingerprint, Card and Password,
Employee ID and Password, Super Password and Duress Code
Calling elevator by visitor or by resident
Remote control of the main elevator controlling via the web client, the guarding expert access
control client software, or other systems
Connectable to the Third party system
Supports managing the floor status through the main elevator controller. The floor status
includes “Disable”, “Controlled”, and ”Free”
Linkage of the distributed elevator controller and reporting the alarm event to the system
IP addresses conflicted alarm
NTP and DST

Main Elevator Controller User Manual
9
Chapter 2 Appearance
2.1 Device Appearance Introduction
The device appearance introduction is shown as follows:
Table 2-1 Device Appearance Description
No.
Description
1
Tamper-Proof
2
Wiegand Terminal
3
IO Input Terminal
4
DIP Switch (Reserved)
5
Indicator
6
Tamper-Proof Interface
7
Power Input
8
Linkage Output Terminal
9
RS-485 Terminal
10
Relay Output Terminal
11
GND Tread Interface

Main Elevator Controller User Manual
10
2.2 Indicator Information
The indicator information is as follows:
Table 2-2 Indicator Description
Description
Indicator
Relay NC Closed
Off
Relay NO Closed
Solid Green
Serial Port Not Communicating
Off
Serial Port Communicating
Solid Green
Network Disconnected
Off
Network Cable Connected
Solid Yellow, Flashing Green
Network Armed
Solid Yellow, Flashing Green
Power On
Solid Green
Running Properly
Flashing Green
Running Exception
Solid Red

Main Elevator Controller User Manual
11
Chapter 3 Installation
Before your start:
The minimum bearing weight of the wall or other places should be three times heavier than
the device weight.
Dial-up before you install.
Steps:
1. Drill holes on the wall or other places according to the holes on the guide rail.
2. Insert the screw sockets of the set screws (supplied) in the drilled holes.
3. Secure the guide rail on the wall or other places with the screws (supplied).
4. Push the device to the guide rail and fix it.

Main Elevator Controller User Manual
12
Chapter 4 Device Wiring
When the panic button, the maintenance button, fire alarm button, and the event alarm are
triggered, the main elevator controller will control the distributed controller to perform the linked
actions via the linkage output.
The wiring of the device upper side is as follows:
Notes:
When the panic button is triggered, all relays keep connected. It is valid for all floors.
When the fire alarm button is triggered, all relays keep disconnected. It is invalid for all floors.
When the maintenance button is triggered, all relays keep disconnected. It is invalid for all
floors.

Main Elevator Controller User Manual
13
Cautions
The maximum power supply for the relay is DC 30 V, 2 A or AC 125 V, 0.5A.
Confirm with elevator manufacturers on wiring methods to avoid faults caused by wrong
wiring.
The Wiegand sequence is displayed as follows:
The wiring of the device lower side is displayed as follows:
Notes:
Each main elevator controller supports up to 24 distributed elevator controllers, including 8
call elevator distributed controllers, 8 auto button distributed controllers, and 8 button
distributed controllers.
Cautions
The maximum power supply for the relay is DC 30 V, 2 A or AC 125 V, 0.5A.
Confirm with elevator manufacturers on wiring methods to avoid faults caused by wrong
wiring.

Main Elevator Controller User Manual
14
Chapter 5 Activation
Purpose:
You are required to activate the device first before using it.
Activation via the web client, activation via SADP, and activation via client software are supported.
The default values of the control terminal are as follows.
The default IP address: 192.0.0.64.
The default port No.: 8000.
The default user name: admin.
5.1 Activating via Web Client
Steps:
1. Open the web browser.
2. For your first login, input the IP address of the main elevator controller to enter device
activation interface.
3. Input the password and confirm the password.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case
letters, lower case letters, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can
better protect your product.
4. Click OK to activate the device. You will login the web client automatically.
Note: The device IP segment should be the same with the PC’s.
5.2 Activating via SADP Software
Purpose:
SADP software is used for detecting the online device, activating the device, and resetting the

Main Elevator Controller User Manual
15
password.
Get the SADP software from the supplied disk or the official website, and install the SADP
according to the prompts. Follow the steps to activate the device.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select an inactive device.
3. Create a password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case
letters, lower case letters, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can
better protect your product.
4. Click Activate to activate the device.
5. Check the activated device. You can change the device IP address to the same network
segment with your computer by either editing the IP address manually or checking the Enable
DHCP checkbox.

Main Elevator Controller User Manual
16
6. Input the password and click Modify to save the IP address.
5.3 Activating via Client Software
Purpose:
The client software is versatile video management software for multiple kinds of devices.
Get the client software from the supplied disk or the official website, and install the software
according to the prompts. Follow the steps to activate the control panel.
Steps:
1. Run the client software and the control panel of the software pops up, as shown in the figure
below.

Main Elevator Controller User Manual
17
2. Click Device Management to enter the Device Management interface.
3. Select an inactive device.
4. Check the device status from the device list, and select an inactive device.
5. Click Activate to pop up the Activation interface.
6. In the pop-up window, create a password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper
case letters, lower case letters, numbers, and special characters) in order to increase
the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can
better protect your product.

Main Elevator Controller User Manual
18
7. Click OK button to start activation.
8. Click the Modify Netinfor button to pop up the Network Parameter Modification interface.
9. Change the device IP address to the same network segment as your computer by modifying
the IP address manually.
10. Input the password and click OK to save the settings.

Main Elevator Controller User Manual
19
Chapter 6 Web Client Operation
6.1 Overview
6.1.1 Introduction
You can access to the elevator controller via the web browser for remote elevator controller
management. You can control the elevator, check the elevator running status, and configure the
elevator parameters via the web client.
6.1.2 Running Environment
Operating System: Microsoft Windows XP SP1 or later
CPU: Intel Pentium 2.0GHz or later
RAM (Memory): 1G or more
Display: Resolution of 1024 X 768 or higher
Web Browser: Internet Explorer 8.0 or later; Mozilla Firefox 5.0 or later; Google Chrome 18 or later
6.2 Login/Logout Web Client
Before you start:
Make sure the device is activated. For details, refer to 5.1 Activating via Web Client.
6.2.1 Login
Steps:
1. Open the web browser and input the device IP in the address field.
2. Click Enter key on your keyboard to enter the login page.