HIK VISION DS-MDH005-B User manual

0
Smart Onboard Temperature Screening Terminal
Installation Guide

Smart Onboard Temperature Screening Terminal • Installation Guide
1
© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates
(hereinafter referred to as "Hikvision"), and it cannot be reproduced, changed, translated, or
distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
Unless otherwise expressly stated herein, Hikvision does not make any warranties, guarantees or
representations, express or implied, regarding to the Manual, any information contained herein.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the
Product.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in
various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR
A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

Smart Onboard Temperature Screening Terminal • Installation Guide
2
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

Smart Onboard Temperature Screening Terminal • Installation Guide
0
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at
his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed
of as unsorted municipal waste in the European Union. See the product documentation
for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Smart Onboard Temperature Screening Terminal • Installation Guide
1
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Safety Instructions
Regulatory Information
This is a class A product and may cause radio interference in which case the user may be required
to take adequate measures.
Laws and Regulations
Use of the product must be in strict compliance with the local laws and regulations. Please shut
down the device in prohibited area.
Power Supply
Use of the product must be in strict compliance with the local electrical safety regulations.
Use the power adapter provided by qualified manufacturer. Refer to the product specification
for detailed power requirements.
It is recommended to provide independent power adapter for each device as adapter overload
may cause over-heating or a fire hazard.
Make sure that the power has been disconnected before you wire, install, or disassemble the
device in the authorized way according to the description in the manual.
To avoid electric shock, DO NOT directly touch exposed contacts and components once the
device is powered up.
DO NOT use damaged power supply devices (e.g., cable, power adapter, etc.) to avoid electric
shock, fire hazard, and explosion.
DO NOT directly cut the power supply to shut down the device. Please shut down the device
normally and then unplug the power cord to avoid data loss.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Make sure the power supply has been disconnected if the power adapter is idle.
Connect to earth before connecting to the power supply.
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.

Smart Onboard Temperature Screening Terminal • Installation Guide
2
Transportation, Use, and Storage
To avoid heat accumulation, good ventilation is required for a proper operating environment.
Store the device in dry, well-ventilated, corrosive-gas-free, no direct sunlight, and no heating
source environment.
Avoid fire, water, and explosive environment when using the device.
Install the device in such a way that lightning strikes can be avoided. Provide a surge
suppressor at the inlet opening of the equipment under special conditions such as the
mountain top, iron tower, and forest.
Keep the device away from magnetic interference.
Avoid device installation on vibratory surfaces or places. Failure to comply with this may cause
device damage.
DO NOT touch the heat dissipation component to avoid burns.
DO NOT expose the device to extremely hot, cold, or humidity environments. For temperature
and humidity requirements, see device specification.
No naked flame sources, such as lighted candles, should be placed on the equipment.
DO NOT touch the sharp edges or corners.
To prevent possible hearing damage, DO NOT listen at high volume levels for long periods.
The device can only be safely used in the region below 2,000 meters above the sea level.
Maintenance
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
If the device cannot work properly, contact the store you purchased it or the nearest service
center. DO NOT disassemble or modify the device in the unauthorized way (For the problems
caused by unauthorized modification or maintenance, the company shall not take any
responsibility).
Keep all packaging after unpacking them for future use. In case of any failure occurred, you
need to return the device to the factory with the original packaging. Transportation without
the original packaging may result in damage to the device and the company shall not take any
responsibility.
Network
Please enforce the protection for the personal information and the data security as the device
may be confronted with the network security problems when it is connected to the Internet.
Contact us if network security risks occur.
Please understand that you have the responsibility to configure all the passwords and other
security settings about the device, and keep your user name and password.
Lens
DO NOT touch the lens with fingers directly in case the acidic sweat of the fingers erodes the
surface coating of the lens.
DO NOT aim the lens at the strong light such as sun or incandescent lamp. The strong light can
cause fatal damage to the device.

Smart Onboard Temperature Screening Terminal • Installation Guide
3
Screen
Clean the screen with soft and dry cloth or other substitutes to wipe the interior and exterior
surface. DO NOT use alkaline detergents. Protect the screen from scratches.
DO NOT install the device in the position obstructing the driver's sight to prevent it from
affecting the normal driving of the vehicle.
Data
DO NOT disconnect the power during formatting, uploading, and downloading. Or files may be
damaged.

Smart Onboard Temperature Screening Terminal • Installation Guide
4
TABLE OF CONTENTS
Chapter 1 Introduction ................................................................................................................... 5
1.1 Product Introduction ........................................................................................................... 5
1.2 Panel Description................................................................................................................. 5
Chapter 2 Installation ..................................................................................................................... 7
2.1 Install SD/SIM Card .............................................................................................................. 7
2.2 Install Device ....................................................................................................................... 7
Chapter 3 Power Cord Wiring......................................................................................................... 9

Smart Onboard Temperature Screening Terminal • Installation Guide
5
Chapter 1 Introduction
1.1 Product Introduction
The smart onboard temperature screening terminal (hereinafter referred to as “device”) supports
human body temperature screening, face recognition, and mask detection. It is embedded with
close-distance lens with scanning function, convenient for the passengers to scan the payment
code or the travelling allowable code.
The device is dedicated for the mobile scene, applicable to buses, coaches, etc.
1.2 Panel Description
The device panel is shown as the figure below.
Figure 1-1 Panel
Refer to the table below for the panel description.
Table 1-1 Panel Description
No.
Name
Description
1
Supplement light
Supplements light for the face detection camera.
2
Temperature
screening camera
Detects temperature via the IR heat of the target
without touching.
3
Code scanning camera
You can scan the payment code or the travelling
allowable code via the camera.
4
Face detection camera
Live view and face detection.

Smart Onboard Temperature Screening Terminal • Installation Guide
6
5
Screen
Displays the live view image, temperature screening
information, etc. of the face detection camera.
6
SD card slot
You can open the card slot cover and insert the SD card
into the slot for local storage.
7
SIM card slot
You can open the card slot cover and insert the SIM card
into the slot for network communication.
8
USB interface
USB interface.
9
4G antenna interface
Connects to the 4G antenna.
10
Network interface
Gets access to the face detection camera.
11
Power input
Connects to the mobile power cord.
12
Wi-Fi antenna
interface
Connects to the Wi-Fi antenna.

Smart Onboard Temperature Screening Terminal • Installation Guide
7
Chapter 2 Installation
Shut down the device before installation.
2.1 Install SD/SIM Card
Install the SD card for the local storage, or install the SIM card for network connection.
Before you start
Prepare the SD/SIM card and screwdriver.
Step 1 Unfasten the two M3 screws via the screwdriver, and open the SD/SIM card slot cover.
Step 2 Insert the SD/SIM card into the SD/SIM card slot.
Step 3 Install the card slot cover, and fasten the screws.
2.2 Install Device
The device can be installed on the bus. Horizontal and vertical pole mounting are both supported.
The description below takes the vertical pole mounting as the example.
Before you start
Install the vertical pole.
Prepare the screwdriver.
Step 1 Place the device in front of the vertical pole with 1.6 m height above the ground.

Smart Onboard Temperature Screening Terminal • Installation Guide
8
Figure 2-1 Place Device
Step 2 Align the holes on the U-Type bracket with those on the device.
Step 3 Fasten four M6 screws into the holes to fix the device on the vertical pole.
Figure 2-2 Fix Device
Never place the equipment in an unstable location. The equipment may fall, causing serious
personal injury or death. Install safety protection equipment if necessary. Check regularly.

Smart Onboard Temperature Screening Terminal • Installation Guide
9
Chapter 3 Power Cord Wiring
The device starts up when your automobile ignites and shuts down after automobile is off.
Automobile ignition startup and shutdown are realized by positive pole ignition switch (providing
high level signal when the switch closes). Ignition switch is connected to the positive pole of
automobile batteries.
The wire connection of the device varies with the automobile ignition models.
Make sure the connection of ignition switch is correct.
Step 1 Connect DC IN + of the device to the positive pole of automobile batteries, jumping over the
switch of normal automobile power.
Step 2 Connect DC IN - of the device to the negative pole of automobile batteries.
Step 3 Connect ACC of the device to the automobile ignition switch.
Step 4 Place fuse into the fuse holder.
DC IN +
DC IN -
ACC
Fuse
Fuse Holder
Figure 3-1 Power Cord
CAUTION: To reduce the risk of fire, replace only with the same type and rating of fuse.
CAUTION: Double pole/Neutral fusing. After operation of the fuse, parts of the equipment that
remain energized might represent a hazard during servicing.
Result

Smart Onboard Temperature Screening Terminal • Installation Guide
10
Figure 3-2 Power Cord Wiring
Contact the automobile manufacturer for the connection information of starting switch.
The automobile ignition switch, also called car key, controls the startup and shutdown of
your automobile. Most of automobiles adopt positive pole ignition switch currently.
The normal automobile power refers to the main power of the automobile power supply
system. After the automobile is off, the normal automobile power still provides
direct-current source for the other devices inside and generally a main switch is used to
turn on/off it.

Smart Onboard Temperature Screening Terminal • Installation Guide
11
UD21321B