HIK VISION EZVIZ C6T MINI 360 PLUS Installation guide

FAQ
How to deal with the system message “Device is offline”?
1) Check the indicator lights on the device; ensure that the device is in configuration mode.
2) Ensure that your router is functional and can go online to the internet and ensure that you do
not have multiple devices on your network.
3) If all the troubleshooting techniques listed above doesn’t resolve the problem, please delete
the device from the account, reset the device and re-add the device to your account.
How to download the recorded video clips?
You can manually record the video while in live view mode or playback mode. While in live
view or playback mode > Tap on the record icon to start the manual recording. Once the
recordings have been completed, your video will be saved to “my album” on your EZVIZ mobile
app.
Does EZVIZ product support 5 GHz Wi-Fi?
Most products are configured to support 2.4 GHz Wi-Fi network mode; however some products
do support 5 GHz. The following products support 2.4/5 GHz Wi-Fi network mode;
DB1, Mini Plus, C6P support 2.4 GHz & 5 GHz.
Sports camera S5 Plus support 2.4 GHz & 5 GHz.
Router W3 support dual band 2.4 GHz and 5 GHz.
All other security cameras support only 2.4 GHz Wi-Fi network mode.
I have insert Micro SD card, but app still shows “No memory card”?
1) Check the installation orientation for the MicroSD card. Ensure that you have installed the
memory card in the correct orientation.
2) Refresh the home page to update the device list.
3) Go to check the storage status, if the memory card status displays as “Uninitialized”, tap to
initialize it. The status will then change to “Normal”. Then you can start recording any event
triggered video in the camera such as motion detection.

What are the differences among Smart Configuration, Sound Configuration, and AP
Configuration?
There are different methods of adding device for the first time. Setting up the device using the
smart configuration or sound configuration mode, the status indicator lights will alternate
between red/blue –indicating that the device is in configuration mode. Setting up the device
using the AP configuration, the status indicator lights will continuously flash blue. You will also
receive voice prompts in some models. Most new devices or devices with updated firmware
versions support AP configuration mode.
Alarm notification messages received, but no message notification sound, how can I resolve this?
Ensure that your mobile phone is not set to "Silent" mode.
For Android Devices
In the device management page of the EZVIZ app, ensure that the notification sound is turned
ON.
For iOS devices,
Go to the system settings page of the phone;
Scroll down to EZVIZ;
Turn on the notification sound from that page;
My mobile phone cannot play the live video, but other phones can play, how can this problem be
resolved?
1) Ensure that you are logged into the correct account.
2) Check the internet connection of your mobile phone (browse other websites to ensure good
internet connectivity), switch from Wi-Fi or 4GHz to rule out all Network problems, then refresh
the page to try again.
3) You can try to view the live video using the EZVIZ Studio. If the device cannot be viewed,
then try to restart the device.
4) If you get the prompt “maximum connection reached”, please close the video feed on other
clients.

What if my router is a dual-band or Tri-band router supporting 2.4GHz, 5GHz or AC mode
simultaneously?
For optimal setup experience, we strongly suggest you use 2 different SSID for 2.4 GHz and 5
GHz.
Why does my playback video Stop for few seconds or get stuck on my mobile phone?
This is caused by the mobile device reaching its maximum network bandwidth. Ensure that you
close all applications utilizing network traffic on your mobile device.