HIK VISION DS-2TD25 Series User manual

0
Explosion-Proof Thermal Camera
Quick Start Guide

Explosion-Proof Thermal Camera · Quick Start Guide
i
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instructions for using and managing the
Product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version of
this Manual at the Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of
professionals trained in supporting the Product.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the
properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their
respective owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL
FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.
THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO
EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF

Explosion-Proof Thermal Camera · Quick Start Guide
ii
SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES
FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE
ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,
HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL
SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A
MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY,
INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER
PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR
PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE
DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL
WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY
NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN
SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATTER PREVAILS.

Explosion-Proof Thermal Camera · Quick Start Guide
iii
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the LVD
Directive 2014/35/EU, the RoHS Directive 2011/65/EU, the ATEX
Directive 2014/34/EU.
This product and - if applicable - the supplied
accessories too are marked with "UKCA" and comply
therefore with the following directives:
Electromagnetic Compatibility Regulations 2016,
Electrical Equipment (Safety) Regulations 2016, the Restriction of the
Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012.
2012/19/EU (WEEE directive): Products marked with
this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info
According to the Waste Electrical and Electronic Equipment
Regulations 2013: Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the United Kingdom. For
proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated
collection points. For more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European

Explosion-Proof Thermal Camera · Quick Start Guide
iv
Union. See the product documentation for specific
battery information. The battery is marked with this
symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier
or to a designated collection point. For more information see:
www.recyclethis.info
According to the Batteries and Accumulators (Placing on the Market)
Regulations 2008 and the Waste Batteries and Accumulators
Regulations 2009: This product contains a battery that cannot be
disposed of as unsorted municipal waste in the United Kingdom. See
the product documentation for specific battery information. The
battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a designated
collection point. For more information see: www.recyclethis.info.
Intended use of the camera
ATEX: II 2 G Ex db IIC T6 Gb
II 2 D Ex tb IIIC T80℃ Db
IECEx: Ex db IIC T6 Gb/ Ex tb IIIC T80 °C Db
Hazardous Area Classification: Zone 1, Zone 2, Zone 21, Zone 22.
IP Degree: IP66/IP68 (2 m, 2 h)
Ex Standards:
IEC 60079-0: 2017
EN 60079-0: 2018
IEC 60079-1: 2014
EN 60079-1: 2014
IEC 60079-31: 2013
EN 60079-31: 2014
Nameplate:

Explosion-Proof Thermal Camera · Quick Start Guide
v
Special Conditions for Safe Use:
1. Under certain extreme dust circumstances, the coating film on the
enclosure of this equipment may generate an ignition-capable level
of electrostatic charge. Therefore the equipment shall not be
installed in a location where the external conditions are conducive
to the build-up of electrostatic charge on such surfaces. In addition,
the equipment shall only be cleaned with a damp cloth.
2. Specific guidance noted to contact the original manufacturer for
information on the dimension of the flameproof joints.
3. The fasteners of window cover shall only be replaced with the
identical part No. SC-HSCSM6X15L11-SUS316L-DAC.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (A)/NMB-003(A) standards
requirements.
Warning:
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to
take adequate measures.
KC

Explosion-Proof Thermal Camera · Quick Start Guide
vi
A급 기기: 이 기기는 업무용(A 급) 전자파적합기기로써
판매자 또는 사용자는 이 점을 주의하시기바라며, 가정 외의
지역에서 사용하는 것을 목적으로 합니다.
Symbol Conventions
The symbols that may be found in this document are defined as
follows.
Symbol
Description
Danger
Indicates a hazardous situation which, if not avoided,
will or could result in death or serious injury.
Caution
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.
Note
Provides additional information to emphasize or
supplement important points of the main text.
Safety Instruction
These instructions are intended to ensure that user can use the
product correctly to avoid danger or property loss.
Laws and Regulations
●In the use of the product, you must be in strict compliance with
the electrical safety regulations of the nation and region.
Transportation
●Keep the device in original or similar packaging while
transporting it.

Explosion-Proof Thermal Camera · Quick Start Guide
vii
●Keep all wrappers after unpacking them for future use. In case of
any failure occurred, you need to return the device to the factory
with the original wrapper. Transportation without the original
wrapper may result in damage on the device and the company
shall not take any responsibilities.
●DO NOT drop the product or subject it to physical shock. Keep
the device away from magnetic interference.
Power Supply
●Input voltage should meet the Limited Power Source (100 to 240
VAC) according to the IEC62368 standard. Please refer to
technical specifications for detailed information.
●Make sure the plug is properly connected to the power socket.
●The socket-outlet shall be installed near the equipment and shall
be easily accessible.
●DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
●DO NOT touch the bare metal contacts of the inlets after the
circuit breaker is turned off. Electricity still exists.
●+ identifies the positive terminal(s) of equipment which is used
with, or generates direct current. - identifies the negative
terminal(s) of equipment which is used with, or generates direct
current.
●The equipment must be connected to an earthed mains socket-
outlet.
●A readily accessible disconnect device shall be incorporated
external to the equipment.
●An all-pole mains switch shall be incorporated in the electrical
installation of the building.
●Ensure correct wiring of the terminals for connection to an AC

Explosion-Proof Thermal Camera · Quick Start Guide
viii
mains supply.
●The equipment has been designed, when required, modified for
connection to an IT power distribution system.
●Use the power adapter provided by qualified manufacturer.
Refer to the product specification for detailed power
requirements.
Installation
●Never place the equipment in an unstable location. The
equipment may fall, causing serious personal injury or death.
●This equipment is for use only with corresponding brackets. Use
with other (carts, stands, or carriers) may result in instability
causing injury.
System Security
●You acknowledge that the nature of Internet provides for
inherent security risks, and our company shall not take any
responsibilities for abnormal operation, privacy leakage or other
damages resulting from cyber attack, hacker attack, however,
our company will provide timely technical support if required.
●Please enforce the protection for the personal information and
the data security as the device may be confronted with the
network security problems when it is connected to the Internet.
Please contact us when the device might exist network security
risks.
●Please understand that you have the responsibility to configure
all the passwords and other security settings about the device,
and keep your user name and password.

Explosion-Proof Thermal Camera · Quick Start Guide
ix
Maintenance
●If the product does not work properly, please contact your dealer
or the nearest service center. We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.
●A few device components (e.g. electrolytic capacitor) require
regular replacement. The average lifespan varies, so periodic
checking is recommended. Contact your dealer for details.
●Wipe the device gently with a clean cloth and a small quantity of
ethanol, if necessary.
●If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the device may be
impaired.
●To reduce the risk of fire, replace only with the same type and
rating of fuse.
●The serial port of the equipment is used for debugging only.
Using Environment
●Make sure the running environment meets the requirement of
the device. The operating temperature shall be -40 °C to 60 °C (-
104 °F to 140 °F), the maximum altitude to use the equipment is
5000 m, and the operating humidity shall be 95% or less, no
condensing.
●DO NOT expose the device to high electromagnetic radiation or
dusty environments.
●DO NOT aim the lens at the sun or any other bright light.
●The equipment shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed
on the equipment.
●No naked flame sources, such as lighted candles, should be

Explosion-Proof Thermal Camera · Quick Start Guide
x
placed on the equipment.
●Provide a surge suppressor at the inlet opening of the equipment
under special conditions such as the mountain top, iron tower,
and forest.
●Burned fingers when handling the parts with symbol . Wait
one-half hour after switching off before handling the parts.
Emergency
●If smoke, odor, or noise arises from the device, immediately turn
off the power, unplug the power cable, and contact the service
center.
Manufacture Address
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Hangzhou Hikvision Digital Technology Co.,Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject
to export controls in various countries or regions, including without
limitation, the United States, European Union, United Kingdom
and/or other member countries of the Wassenaar Arrangement.
Please consult your professional legal or compliance expert or local
government authorities for any necessary export license
requirements if you intend to transfer, export, re-export the thermal
series products between different countries.

Explosion-Proof Thermal Camera · Quick Start Guide
xi
Table of Contents
1 Introduction.................................................................................... 1
1.1 Overview......................................................................... 1
1.2 Model Description........................................................... 1
2 Appearance Description ................................................................. 4
2.1 Camera Overview............................................................ 4
2.2 Cable Description ............................................................ 5
3 Installation...................................................................................... 6
3.1 Camera Installation ......................................................... 6
3.2 Terminal Box Installation ............................................... 11
4 Setting the Network Camera over the LAN .................................. 12
Wiring ........................................................................... 12
Activating the Camera................................................... 12

Explosion-Proof Thermal Camera · Quick Start Guide
1
1Introduction
1.1 Overview
Explosion-proof thermal camera is a video security product capable
of video/audio collecting, smart encoding and network transmitting.
It adopts an embedded system and a high-performed hardware
process platform to achieve good stability and reliability.
You can visit and configure your camera via web browser and client
software.
Explosion-proof network camera adopts a stainless steel enclosure,
receiving an IP68 rating for ingress protection.
Application Scenarios: oil industry, mine fields, chemical industry,
port, grain processing industry, etc.
1.2 Model Description
Explanation of model naming:

Explosion-Proof Thermal Camera · Quick Start Guide
2
Lens focal length (mm):
4: 4 mm
5: 5 mm
DS-2 T D 2 5 X X/XT
Hikvision front-end product
For specialized application
Thermal camera
Shape:
2: Bullet camera
Max. Resolution (MP): 6: 0.3 MP
Stands for hardware performance,
including platform, sensor, etc.. Larger
number means better performance
- X X
Platform
Figure 1-1 Model Explanation
Table 1-1 Naming Rule
Explosion-Proof Thermal Camera
①
DS-2
Hikvision
②
T
Thermal Camera
③
D
Network
④
2
Structural form: Bullet
⑤
5
Special purpose: explosion-proof, corrosion
protection, Bi-spectrum
⑥
X
Resolution：
2, 3, 6, A, C,
⑦
X(T)
Thermal core characteristics：
3, 7, 8
T: Temperature Accuracy

Explosion-Proof Thermal Camera · Quick Start Guide
3
⑧
XXXX
Focal Length:
3, 4, 5, 7, 10, 15, 25,
A/B/C/D/E/F/ZSH/ZHY/ZSY (Reserved focal
length)
⑨
X
Function extension platform type: Q

Explosion-Proof Thermal Camera · Quick Start Guide
4
2Appearance Description
2.1 Camera Overview
See the figure below for reference.
Figure 2-1 Overview of the Camera
Table 2-1 Description of the Camera
No.
Description
1
PT Joint
2
Sun shield
3
Cable
4
Main body
5
Wall bracket

Explosion-Proof Thermal Camera · Quick Start Guide
5
2.2 Cable Description
Figure 2-2 Overview of Cables
Table 2-2 Description of Cables
No.
Description
1
RJ45 Ethernet interface
2
Audio input and output
3
Alarm input and output
4
RS-485
5
Power cable

Explosion-Proof Thermal Camera · Quick Start Guide
6
3Installation
Before you start:
●Make sure the device in the package is in good condition and all
the assembly parts are included.
●The standard power supply is 220 VAC, please make sure your
power supply matches with your camera.
●Make sure all the related equipment is power-off during the
installation.
●Check the specification of the products for the installation
environment.
●Make sure that the wall is strong enough to withstand four times
the weight of the camera and the bracket.
For the camera that supports IR, you are required to pay attention to
the following precautions to prevent IR reflection:
●Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
3.1 Camera Installation
Before you start:
There is a wall mounting bracket included in the package, and you can
purchase a terminal box separately.

Explosion-Proof Thermal Camera · Quick Start Guide
7
Figure 3-1 Dimension of the Wall Mounting Bracket
Steps:
1. Loosen and remove the screws to dissemble the PT joint.
Figure 3-2 Dissemble PT Joint
Note: ①: PT Joint Top; ②: PT Joint Bottom
2. Drill four holes in the wall with a Φ12 drill, and drill four expansion
screws into the holes.

Explosion-Proof Thermal Camera · Quick Start Guide
8
Figure 3-3 Drill Expansion Screws into the Holes
3. Align the four holes on the bracket with the four expansion screws
on the wall, install the bracket on the wall, and tighten the screws.
Figure 3-4 Install Bracket
4. Install the PT joint top to the mounting base of the camera with
four 1/4-20UNC screws, then connect the safety rope to the hook
of the camera.