Hilti PR 2-HS User manual

PR 2-HS I Quick guide I 2014 1
www.hilti.com.au
Shock-Mode Deactivation:
PR 2-HS Quick guide
Slow
beeping Solid beep Fast
beeping
Press ON/OFF
Wait for Laser
1. Press ON/OFF 3. Press Shock-Mode button to
deactivate Shock-Mode
4. LED indicates Shock-Mode is
deactivated
2. Shock-Mode activates
automatically after 2 minutes
Basic Application
3. If rotator is bumped, laser
stops rotating and all LEDs
activate
Press ON/OFF for 3 sec. to enter
PRA 20 Settings
Press to change
Volume (normal/
loud/ off /low)
Press to change
units (1/8 / 1/16 /
off)
PRA 20 Menu
change the sound to beep
more rapidly above the PRA
30 center mark or below
change digital measurement
units from mm (Metric) to
inches (Imperial)

PR 2-HS I Quick guide I 2014 2
www.hilti.com.au
PR 2-HS Quick guide
Keyboards:
Slope
LED Leveling
LED Slope Mode On
Battery Status
LED Shock Warning
deactivated
On/Off
Shock Warning
Button
Slope Mode
Button
Units
(cm/mm)
Volume
On/Off
Set slope adapter
to 0%.
Mount PRA 79
Slope Adapter &
PR 2-HS on Tripod
1. Press
ON/OFF
2. Press Slope
Mode key
3. Wait for
leveling
When laser starts to rotate, turn slope
screw on slope adapter to set desired
inclination.
* Read the operating instructions before the tool is used for the first time