Hisense AP-10CR1SEJS User manual

1-877-465-3566
Portable Air Conditioner Use & Care Guide
For questions about features, operation/performance, parts or service, call:
o servicio, llame al:
Para preguntas sobre características, funcionamiento, rendimiento, piezas
1-877-465-3566
Model#: AP-10CR1SEJS
AP-12CR1SEJS
AP-14DR1SFJS2

1
TABLE OF CONTENTS
AIR CONDITIONER SAFETY.........................................................3
INSTALLATION REQUIREMENTS................................................ 3
Tools and Parts...........................................................................3
Location Requirements............................................................... 4
Electrical Requirements.............................................................. 4
INSTALLATION INSTRUCTIONS.................................................. 5
Unpack the Air Conditioner......................................................... 5
Install Portable Air Conditioner................................................... 6
Complete Installation...................................................................8
PORTABLE AIR CONDITIONER USE...........................................8
Starting Your Portable Air Conditioner........................................8
Using the Remote Control......................................................... 10
IDENTIFICATION OF PARTS............................................3
.
Normal Sounds..........................................................................14
Draining the Air Conditioner.......................................................15
Cleaning the Air Filter.................................................................
15
Storing After Use........................................................................15
TROUBLESHOOTING..................................................................16
ASSISTANCE OR SERVICE.........................................................17
PORTABLE AIR CONDITIONERCARE...................................... 14 ..
1
Cleaning the Outside.................................................................. 5
PRODUCT REGISTRATION.....................................................17
WARRANTY..............................................................................18

IDENTIFICATION OF PARTS
Control panel
Cool air outlet
Signal receptor
Remote control
Transport handle
Air outlet hose
Evaporator air intake
Secondary drain port
Power supply
Primary drain port
Front
Back
The figures in this manual are based on the external view of a standard model.
They may differ from that of the air conditioner you have selected.
Condenser air intake
ON/OFF
MODEFAN
SWINGSLEEPSUPER
SMARTIFEELDIMMER
TIMER ONTIMER OFFCLOCK
ON
OFF
ON
OFF
2

3
AIR CONDITIONER SAFETY
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING ."
These words mean:
follow instructions.
instructions.
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:
SAVE THESE INSTRUCTIONS
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
You safety and the safety of others are very important.
DISPOSING OF THE UNIT
Before throwing the device, it is necessary to pull back the battery cells and get rid of them safety for recycling reasons.
When you need to disposal of the unit consult our dealer. If pipes are removed incorrectly, refrigerant may blow out and
please recycle or dispose of the packaging material for product in an environmentally responsible manner.
Never store or ship the air conditioner upside down or sideways to avoid damage to the compressor .
The appliance is not intended for use by young children or infirm persons without supervision. Young children should be
come into contact with your skin, causing injury. Releasing refrigerant into the atmosphere also damages the environments.
supervised to ensure that they do not play with the appliance.
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Parts supplied
Check that all parts are included in parts package.
■Phillips screwdriver
■Saw
■Pencil
■Scissors
■Cordless drill and ¹⁄₈" bit
A.Foam seal
B.Dummy coupling
C.Flexible exhaust hose
D.Window exhaust adapter
E.1⁄₂screws (2)
F.Wood screws(4)
G.Window-lock bracket(2)
"
H.Rain coverI.
I.Outer slider section
J. Inner slider section
K. Bolts (4)
L. Nuts (4)
M.Spring washers (4)
N.Plain washers (4)
B
FG
A
C
D
E
I
H
K
J
LM
N

4
Location Requirements
Electrical Requirements
■ The portable air conditioner should be connected to a 115V, 60
Hz, 15-amp fuse grounded 3 prong outlet.
■ The use of a time-delay fuse or time-delay circuit breaker is
recommended.
■ All wiring must comply with local and the national electrical
codes and be installed by a qualified eletrician. If you have
any questions, contact a qualified electrician.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
WARNING
fire, or electrical shock.
NOTES:
■ The flexible exhaust hose allows placement of the air
conditioner between 23⁵⁄₈" and 64 " (60 cm and 163 cm)
from window or door
■ Portable air conditioners are designed as supplemental
cooling to local areas within a room.
¹⁄₈
Vertical Slide Widow
Horizontal Slide Window
23⁵⁄₈" - 64¹⁄₈"
(60 cm - 163 cm)
23⁵⁄₈" - 64¹⁄₈"
(60 cm - 163 cm)
NOTES:
■ To ensure proper ventilation, keep the required distance from
the return air outlet to the wall or other obstacles at least 23⁵⁄₈
" (60 cm).
■ Do not block the air outlet.
■ Provide easy access to the grounded 3 prong outlet.

5
Power Supply Cord
NOTE: Your air conditioners device may differ from the one
shown.
To test your power supply cord:
1. Plug power supply cord into a grounded 3 prong outlet.
2. Press RESET (on some devices, a green light will turn on).
3. Press TEST (listen for click; Reset button will trip, and on
some devices, a green light will turn off).
4. Press and release RESET (listen for click; Reset button will
latch, and on some devices, a green light will turn on). The
power supply cord is ready for operation.
NOTES:
■The Reset button must be pushed in for proper operation.
■The power supply cord must be replaced if it fails to trip when
the test button is pressed or fails to reset.
■Do not use the power supply cord as an off/on switch. The
power supply cord is designed as a protective device.
■A damaged power supply cord must be replaced with a new
power supply cord obtained from the product manufacturer
and must not be repaired.
■The power supply cord contains no user serviceable parts.
Opening the tamper-resistant case voids all warranty and
performance claims.
INSTALLATION INSTRUCTIONS
Unpack the Air Conditioner
Remove packaging materials
■Remove and dispose of/recycle packaging materials.
Remove tape and glue residue from surfaces before turning
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
■Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
■Handle the air conditioner gently.
A.Test button
B.Reset button
TEST
RESET
A
BElectrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
WARNING
This room air conditioner is equipped with a power supply cord
required by UL. This power supply cord contains state-of-the-art
electronics that sense leakage current. If the cord is crushed, the
electronics detect leakage current and power will be
disconnected in a fraction of a second.

6
Window Installation
1. Roll the air conditioner to selected location. see “Location
Requirements.”
2. Attach the dummy coupling to the flexible exhaust hose. Turn
anticlockwise until securely locked into place.
Install Exhaust Hose and Adapter
3. Attach the window exhaust adapter to the flexible exhaust
hose. Turn anticlockwise until securely locked into place.
Your window slider kit has been designed to fit most standard
vertical and horizontal window applications. Roll the air
conditioner to selected location. see “Location Requirements.”
1. Insert the windows exhaust adapter into the slot on the window
slider kit.
A. Window slider kit
B. Window exhaust adapter
2. Using the 2 bolts, washer and nuts (provided), attach the rain
cover to the window slider kit for either the vertical or
horizontal installation.
NOTES:
The holes in the window slider kit are positioned for
attaching the rain cover for vertical or horizontal installation.
Insert the other 2 bolts, washers and nuts (provided) into
the unused holes in the window slider kit to keep moisture
from leaking through the window slider kit.
■
■
Rain cover--Vertical Installation
A. Window exhaust adapter
B. Rain cover
C. Outlet grille
D. Bolts inserted into unused
holes in Window slider kit
D
A
C
4. Insert the dummy coupling into the slot on the back of the air
conditioner.
5. Slide down to lock the hose into place.
12
34
NOTES:Four holes in the rain cover for vertical installation. Insert
the 2 bolts with “1” “3” or “2” “4”.
A
B
Install Portable Air Conditioner
A. Evaporator air intake
B. Dummy coupling
C. Flexible exhaust hose
D. Condenser air intake
A
C
B
D
A. Flexible exhaust hose
B. Window exhaust adapter
A
B
B

7
Rain cover--Horixontal Installation NOTE: For casement window installation, the window slider kit
may be installed vertically with the window slider kit opening
at the bottom.
3. Open the window.
4. Measure the window opening.
If the window opening is too narrow for the window slider kit,
remove the inner slider section from the window slider kit.
■6. Inset ½” screw (provide 2) into the hole in the inner slider
section that is closest to the end of the outer slider section of
A. ½”screw (provide 2)
B. Inner slider section
C. Outer slider section
7. Close the window onto the window slider kit to secure.
A. To portable air conditioner
B. Outdoors
C. Rain cover
D. Window slider kit
E. Window exhaust adapter
F. Flexible exhaust hose
A
B
C
D
A B
C
E
F
A. Window exhaust adapter
B. Rain cover
C. Outlet grille
D. Bolts inserted into unused
holes in Window slider kit
A. Inner slider section
B. Outer slider section
Using a saw, cut the inner slider section to fit the window
opening.
Slide the inner slider section into the outer slider section of
the window slider kit.
■
■
5. Place the window slider kit into the window, extending it to fit
the width of the window. Be sure the rain cover is on the
outside of the window.
A
B
A
B
C
D

8
Complete Installation
1. Place the window-lock bracket on top of the lower window and
against the upper window sash.
2. Use 1/8” drill bit to drill a starter hole through the hole in the
bracket.
3. Attach the window-lock bracket to the window sash with wood
screw(provide 4) to secure the window in place.
A. Upper window sash
B. Window-lock bracket
4. Insert the foam seal behind the top of the lower window sash
and against the glass of the upper window.
A. Top of lower window sash
B. Foam seal
A
B
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
WARNING
fire, or electrical shock.
5. Plug into a grounded 3 prong outlet.
6. Press RESET on the power supply cord. see “Electrical
Requirements.”
PORTABLE AIR CONDITIONER USE
Operating your air portable conditioner properly helps you to
obtain the best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
NOTE: In the event of a power failure, your air conditioner will
operate at the previous settings when the power is restored.
The air conditioner display shows the current room
temperature.
When changing modes while the air conditioner is
operation, the compressor will stop for 3 to 5 minutes before
restarting.
■
■
If a button is pressed during this time, the compressor will
not restart fo another 3 to 5 minutes.
In Cooling or Dry mode, the compressor and condenser fan
will stop when the room temperature reaches the set
temperature.
■
A
B

9
Starting Your Portable Air Conditioner
1. Select the mode. See " MODE ".
2. Select the fan speed. See " FAN ".
3. Set the temperature. See "TEMPERATURE".
4. Press POWER button to start the air conditioner.
When the air conditioner is turned on for the first time after it is
plugged in, it will run in the Smart Mode control. When the air
conditioner is turned on at all other times, it will run according to
the previous setting. Smart Mode can be selected with the remote
control only.
Only if the unit is operated in UNLIKELY VERY HUMID air,
water will be collected in the container inside the unit. If the
water container is full, the air conditioner will stop. The
screen will displays “E5” to inform you to empty the internal
container.
NOTE:
Operating modes:
1. Press and release MODE until you see the symbol flashes for the
desired setting.
2. Choose Cooling, Dry, Fan Only or Heating.
Dry-Dries the room. The air conditioner automatically selects
the temperature. The fan runs on Low speed only.
Cooling-Cools the room. Press FAN to select High,
Mid or Low. Press the Plus or Minus button to adjust the
temperature.
NOTE:Dry mode should not be used to cool the room.
Fan Only-Only the fan runs. Press FAN to select High,
Mid or Low.
Heating-heats the room. Press FAN to select high,
Mid or Low. Press the PLUS or MINUS button to adjust the
temperature.
NOTE:Heating is NOT available for cooling only air conditioner.
Fan Speed
Mid-for normal fan speed
Low-for minimum fan speed
Auto-automatically controls the fan speed depending on the
current room temperature and temperature control setting.
High-for maximum fan speed
1. Press and release FAN to choose the desired fan speed.
2. Choose High, Mid or Low.
NOTE:The symbols may be different from these models, but the functions are similar.