Hisense RB412N4AI1 Mounting instructions

1
Hisense Refrigerator
RB412N4AF1
RB412N4AI1
RB412N4WF1
RB411N4BW1
RB411N4WW1
RB412N4WI1

Disposal of the appliance23
Troubleshooting 22
leaning and care21
Helpful hints and tips 20
Using your appliance 17
Display controls 16
Description of the appliance13
2
Hisense Refrigerator
Contents
Safety and warning information 2
Installing your new appliance 8
This appliance is in accordance with the following EU guidelines: LVD
2014/35/EU and EM 2014/30/EU and 2009/125/E and E .1060/2010 and
2002/96/E .
Safety and warning information
For your safety and correct
usage, before installing and
first using the appliance, read
this user manual carefully,
including its hints and
warnings. To avoid
unnecessary mistakes and
accidents, it is important to
make sure that all people
using the appliance are
thoroughly familiar with its
operation and safety features.
Save these instructions and
be sure that they remain with
the appliance if it is moved or
sold, so that anyone using it
throughout its life will be
properly informed on usage
and safety notices.
For the safety of life and
property, keep the
precautions of these user's
instructions as the
manufacturer is not
responsible for damages
caused by omission.
Safety for children and others
who are v lnerable
This appliance can be
used by children aged from
8 years and above, and
persons with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the
appliance in a safe way
and understand the
hazards involved. hildren
shall not play with the
appliance. leaning and
user maintenance shall not
be made by children
without supervision.
Keep all packaging away
from children as there is risk
of suffocation

3
Hisense Refrigerator
If you are discarding the
appliance, pull the plug out
of the socket, cut the
connection cable (as close
to the appliance as you can)
and remove the door to
prevent children playing
from suffering an electric
shock or from closing
themselves inside.
If this appliance, featuring a
magnetic door seals, is to
replace an older appliance
having a spring lock (latch)
on the door or lid, be sure to
make the spring lock
unusable before you discard
the old appliance. This will
prevent it from becoming a
death trap for a child
General safety
WARNING —This
appliance is intended
to be used in households
and similar applications
such as
-staff kitchen areas in shops,
offices and other working
environments;
-farm houses and by clients
in hotels, motels and other
residential type
environments;
-bed and breakfast type
environments;
-catering and similar
nonretail applications
WARNING — Do not store
explosive substances such
as aerosol cans with a
flammable propellant in this
appliance.
WARNING — If the supply
cord is damaged, it must be
replaced by a qualified
electrician in order to avoid
the risk of electric shock.
WARNING — Keep
ventilation openings in the
appliance enclosure or in
any built-in structure clear of
obstruction.
WARNING — Do not use
mechanical devices or other
means to accelerate the
defrosting process, other
than those recommended by
the manufacturer.
WARNING — Do not
damage the refrigerant
circuit.
WARNING — Do not use
electrical appliances inside
the food storage
compartments of the
appliance, unless they are of
the type recommended by
the manufacturer.

4
Hisense Refrigerator
WARNING — The
refrigerant and insulation are
flammable. When disposing
of the appliance, do so only
at an authorized waste
disposal center. Do not
expose to flame.
Refrigerant
The refrigerant isobutene
(R600a) is contained within
the refrigerant circuit of the
appliance, a natural gas with
a high level of environmental
compatibility, which is
nevertheless flammable.
During transportation and
installation of the appliance,
ensure that none of the
components of the refrigerant
circuit becomes damaged.
The refrigerant (R600a) is
flammable.
WARNING — Refrigerators
contain refrigerant and
gases in the insulation.
Refrigerant and gases must
be disposed of
professionally as they may
cause eye injuries or ignition.
Ensure that tubing of the
refrigerant circuit is not
damage prior to proper
disposal.
Ca tion: risk of fire
If the refrigerant circuit is
damaged:
-Avoid naked flames and
sources of ignition.
-Thoroughly ventilate the
room in which the appliance
is situated.
It is dangerous to alter the
specifications or modify this
product in any way.
Any damage to the cord may
cause a shortcircuit, fire,
and/or electric shock.
Electrical safety
1. The power cord must not
be lengthened.
2. Make sure that the power
plug is not crushed or
damaged. A crushed or
damaged power plug may
overheat and cause a fire.
3. Make sure that you can
access the main plug of the
appliance.
4. Do not pull the main
cable.
5. If the power plug socket
is loose, do not insert the
power plug. There is a risk
of electric shock or fire.
6. You must not operate the
appliance without the
interior lighting lamp cover.

5
Hisense Refrigerator
7. The fridge is only supplied
with power supply of single
phase alternating current of
220 ~ 240 V/50Hz. If
fluctuation of voltage in the
district of user is so large
that the voltage exceeds the
above scope, for safety sake,
be sure to apply A. .
Automatic voltage regulator
of more than 350W to the
fridge. The fridge must
employ a special power
socket instead of common
one with other electric
appliances. Its plug must
match the socket with
ground wire.
Daily se
Do not store flammable
gas or liquids in the
appliance. There is a risk of
an explosion.
Do not operate any
electrical appliances in the
appliance (e.g. electric ice
cream makers, mixers etc.).
When unplugging always
pull the plug from the mains
socket, do not pull on the
cable.
Do not place hot items near
the plastic components of
the fridge.
Do not place food products
directly against the air outlet
on the rear wall.
Store pre-packed frozen
food in accordance with the
frozen food manufacture’s
instructions.
The manufactures storage
recommendations should be
strictly adhered to. Refer to
relevant instructions for
storage.
Do not place carbonated or
fizzy drinks in the freeze
compartment as it creates
pressure on the container,
which may cause it to
explode, resulting in
damage to the appliance.
Frozen food can cause frost
burns if consumed straight
from the freezer
compartment.
Do not place the appliance
in direct sunlight.
Keep burning candles,
lamps and other items with
naked flames away from the
appliance so that do not set
the appliance on fire.
The appliance is intended
for keeping food and/or
beverages in normal
households as explained in

6
Hisense Refrigerator
this instruction booklet The
appliance is heavy. are
should be taken when
moving it.
Do not remove or touch
items from the freezer
compartment if your hands
are damp/wet, as this could
cause skin abrasions or
frost/freezer burns.
Never use the base,
drawers, doors etc. to stand
on or as supports.
Frozen food must not be
refrozen once it has been
thawed out.
Do not consume ice
popsicles or ice cubes
straight from the freezer as
this can cause freezer burn
to the mouth and lips.
To avoid items falling and
causing injury or damage to
the appliance, do not
overload the door racks or
put too much food in the
crisper drawers.
Ca tion!
Care and cleaning
Before maintenance, switch
off the appliance and
disconnect the mains plug
from the mains socket.
Do not clean the appliance
with metal objects, steam
cleaner, ethereal oils,
organic solvents or abrasive
cleansers.
Do not use sharp objects to
remove frost from the
appliance. Use a plastic
scraper.
Installation important!
For electrical connection
carefully, follow the
instructions given in this
manual.
Unpack the appliance and
check if there are damages
on it. Do not connect the
appliance if it is damaged.
Report possible damages
immediately to the place you
bought it. In this case retain
packing.
It is advisable to wait at least
four hours before connecting
the appliance to allow the oil
to flow back in the
compressor.
Adequate air circulation
should be allowed around
the appliance reducing the
risk of overheating. To
achieve sufficient ventilation,
follow the instructions
relevant to installation.

7
Hisense Refrigerator
Wherever possible the back
of the product should not be
close to a wall to avoid
touching or catching warm
parts (compressor,
condenser) to prevent the
risk of a fire, follow the
instructions relevant to
installation
The appliance must not be
locate close to radiators or
cookers.
Make sure that the mains
plug is accessible after the
installation of the appliance.
Service
Any electrical work required
to do the servicing of the
appliance should be carried
out by qualified electrician or
competent person. This
product must be serviced by
an authorized Serviced
enter, and only genuine
spare parts must be used.

8
Hisense Refrigerator
Installing yo r new appliance
Before using the appliance for the first
time, you should be informed of the
following tips.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to maintain good
ventilation around the appliance. For this
reason, sufficient clear space should be
available around the refrigerator.
Suggest :It is advisable for there to be at
least 75mm of space from the back to the
wall, at least 100mm from its top, at least
100mm from its side to the wall and a clear
space in front to allow the doors to open
115°. As shown in follow diagrams.
Note:
 This appliance performs well within the
climate class showed in the table below.
It may not work properly if being left at a
temperature above or below the indicated
range for a long period.
limate class Ambient temperature
SN +10° to +32°
N +16° to +32°
ST +16° to +38°
T +16° to +43°
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight ，
rain or frost. Stand the appliance away
from heat sources such as stoves, fires
or heaters.
Leveling of appliance
For sufficient leveling and air circulating
in the lower rear section of the appliance,
the bottom feet may need to be adjusted.
You can adjust them manually by hand or
by using a suitable spanner.
To allow the doors to self-close, tilt the
top backwards by about 10mm.
Reversing the door
The side at which the door opens can be
changed, from the right side (as supplied)
to the left side, if the installation site
requires.
Warning! When reversing the door, the
appliance must not be connected to the
mains. Ensure that the plug is removed
from the mains socket..
Tools you will need
Note:
When required, tilt the refrigerator back
in order to gain access to the base, you
should rest the appliance on soft foam
packaging or similar material to avoid
damaging the backboard of the
refrigerator. To reverse the door, the
following steps are generally
recommended. Different models may

9
Hisense Refrigerator
correspond to different pictures. Models
will be written in the picture. If some parts
are not shown in the picture, please ignore
the relevant description.
1. Stand the refrigerator upright. Open the
upper door to take out all door racks (to
avoid racks damaged) and then close the
door.
2. Remove part ① , loose part ② from the
top right side of refrigerator and be careful
of the electrical connector ③ below,
because electrical connectors are still
connected. Then disconnect electrical
connector ③ and take down part ② .
3. Remove screws ① and hinge ② . Then
pass connector ③ through the hole of
hinge ② .(Please hold upper door by hand
when installing)
4. Remove the upper door from the middle
hinge by carefully lifting the door straight
up. Then place the upper door on a
smooth surface with its upper cover
upwards.

10
Hisense Refrigerator
5. Take screw hole cover(right) from
plastic bag and install it onto the top right
side of refrigerator body. Then remove
screw hole cover(left) from the top left side
of appliance and put it into plastic bag.
6. Remove part ① from the top left side of
upper cover and take out part ② . Then
remove part ③ and part ④ from the top
right side of upper cover. Put part ⑤ into
the top right side of upper cover. Refer to
above operation, install part ③ and part ④
onto the top left side of upper cover. Install
part ① of the top right side of upper cover.
7. Loose screw ③ and take down part ②
and part ① , Install replacement door
stopper-left ④ provided (in the plastic bag)
and part ② (stop block) to the left side with
screw ③ . Keep part ① with the appliance
for future reference.
8. Loose screws used to fix the middle
hinge and remove middle hinge. Then
remove the lower door.