HiTi Digital S420 User manual

s

HiTi Photo Printer x 1
LCD Controller x 1
Power Cord x 1
USB Cable x 1
※ For the connection between the photo printer and the computer
Paper Cassette x 1
HiTi Bag x 1 (including following items…)
A.
B.
C.
D.
E.
01
※ The package content varies according to different areas.
Check the Package Content
Before using HiTi photo printer, please check the printer package content for the
following items:
Printer User Manual x 1
Quick Guide x 1
Notice Sheet x 1
Warranty Card x 1
Master CD x 1
IDésirée Bag x 1 (including following items…)
A.
B. IDésirée User Manual x 1
IDésirée Installation CD x 1

Outline
Get to know S420
Standalone printing
PC-link Printing
Installing S420
Troubleshooting
Contact HiTi
03
04
22
23
24
09
10
16
02
A. Home Menu Introduction
B. Main Function Instruction
C. Special Function Instruction

To ensure proper printer operation, please read the following instructions thoroughly
before using the S420 photo printe.
LCD controller 1.
2.
3.
4.
5.
6.
Front view 1. Ribbon Door Button
2. Ribbon Door
3. Indicator
4. MMC/SD/MS Memory Card Slot
5. CF Memory Card Slot
6. USB Host Slot
7. Paper Cassette Door
1. Hatchback
2. Heat Ventilation
3. Power Switch
4. Power Cord Socket
5. Controller Socket
6. USB Port
03
TFT Color LCD
Directional Button
〔ESC〕
〔OK〕
〔PRINT〕
〔EDIT〕
Back view
1
2
3
4
5
6
1 2 3
4
5
6
7
ESC OK
PRINT EDIT
1
2
3 4
6
5
Get To Know S420

Installing LCD controller
LCD controller installation is complete.
04
Installing S420
Connect the LCD
controller to S420
1 2

Installing ribbon cartridge
Push the ribbon door button to open the
ribbon door.
2
Install the ribbon cartridge inserting the left
(indicated by the arrow) side of the ribbon
first followed by the right side.
The ribbon has to be installed in the printer
properly. Close the ribbon door to complete the ribbon installation.
05
Installing S420
1
3 4
www.hi-ti.com

Loading photo papers
1 2
Open the paper cassette cover.
3
Load photo papers into the paper cassette and
then close the cover.
4
Open the paper cassette door on the printer
and insert the paper cassette.
※
06
Broadside
Installing S420
Follow the demonstration to correctly remove
photo papers from the packing.
Please hold the perforated side of photo paper and avoid touching the surface when taking
them out from the packing

Powering up the printer
Turn on the power.
07
Installing S420
Plug the power cord into the power cord socket
at the back of the printer.
1 2

Installation of Dust Proof Case
Installing S420
Gently insert the latch into the corresponding latch receiver opening on one side first, then
gently push the latch on the opposite end of the dust proof case into the corresponding latch
receiver opening to finish the installation.
Hold the end of dust proof case firmly and gently push the dust proof case
downward to uninstall the dust proof case.
Incorrect installation or disassembly way break the latch.
Installing the dust proof case
Disassembling of the dust proof case
08

1. Image device from USB host 6. Printing control by
digital camera
7. PHOTO
8. STICKER
12. INDEX
13. SETUP
14. Confirm or continue
9. IMAGE DEVICE
10. Cancel or go back
4. Matte effect ON
5. Printing control by S420
A. Home Menu Introduction
1 2 3 4 5 6
7
8
9
11
12
13
14
10
Standalone printing
11. ID PHOTO
3. Image device from SD / MMC
/ MS / MS Pro
2. Image device from CF/
Micro Drive
09

取消 確認 取消 確認
Choose [PHOTO], and press
[OK] to continue. Select [Batch Print], and then press [OK] to continue.*
1 2
Pick a photo for output, and
then press [OK] to continue or
press [EDIT] to start editing.
As to how to edit photos,
please see Special Function
Introduction for detail.
3
取消 確認
取消 確認
The number of copies
chosen is displayed at lower
right corner. Repeat step 3
and step 4, when everything
is done, please press [PRINT]
to start printing.
4 5 6
取消
Use directional button to
determine the number of
copies, and then press [OK]
to go back image navigator.
S420 is processing the job.
* Note that Quick Print item does not allow users to edit photos selected.
Standalone printing
B. Main Function Instruction
Photo
10

Choose [ID PHOTO], and
press [OK] to continue. Select an ID format, and then
press [OK] to continue.
1 2
Load images into column
highlighted.
3
Repeat step 3 and step 4 to
finish loading images into
the second column.
4 5 6
Select an image, and then
press [OK] to continue. When all columns are filled, please determine the
number of copies and press
[PRINT] to start printing.
B. Main Function Instruction
ID Photo
11
Standalone printing

12
Choose [STICKER], and press
[OK] to continue. Select a sticker, and then
press [OK] to continue.
1 2
Load images into column
highlighted.
3
Repeat step 3 and step 4 to
continue filling the rest of
the columns.
4 5 6
Pick an image, and then
press [OK] to continue. When all columns are filled, please choose the number of
copies and press [PRINT] to
start printing.
B. Main Function Instruction
Sticker
Standalone printing

Choose [INDEX], and press
[OK] to continue. Select an index format, and then press [OK] to continue.
1 2
The printer automatically
counts the copy of prints based
on the index format. Please
press [OK] or [PRINT] to start
printing or press [ESC] to go
back.
3
Select an image device as
the image source, and then
press [OK] to save the
setting.
1 2 3
Choose [IMAGE DEVICE], and
press [OK] to continue. The selected image device is displayed in blue.
B. Main Function Instruction
Index
Image-device
13
Standalone printing

Choose [SETUP], and press
[OK] to continue. Language: Accessible languages on S420 may vary
from region to region.
1 2
LinkPrint: Users are allowed to
control the S420 by using the
LCD controller or by using a
digital camera.
3
Printer Setting: Allows users
to enable or disable
Auto-Color and Matte effect,
adjust LCD screen, color
setting, and print position.
4 5 6
Quick Preview: Choose
between 2 or 6-image
navigator. The image
navigator can display up to
6 image per page.
PIN Code: To assure printer
security, a PIN code can be
set. Once set, the PIN code
would have to be entered
when the printer reboots or
the printing list is being
cleared.
B. Main Function Instruction
Setup
14
Standalone printing

Counter: The user is allowed
to reset the counter if the
PIN code is correctly
entered.
Cleaning Mode: HiTi strongly
suggest users to utilize this
function frequently to keep
the printer in optimal
condition.
7 8
About: It displays information
about the current printer
firmware, color table version,
and controller firmware
version.
9
B. Main Function Instruction
Setup
15
Standalone printing

In the image navigator,
select an image and press
[EDIT] to adjust and enhance
the selected image.
Select an image editing
function and press [OK] to
start editing.
1 2
Example on ‘Move’: Use
directional button to adjust
the position of output image.
3
Example on ‘Color R/G’: Use
directional button to adjust
the level of red or green.
4 5
Example on ‘Contrast’: Use
directional button to adjust
the contrast of output
image.
C. Special Function Instruction
Image adjuster &enhancer
16
Standalone printing

17
Choose [SETUP], and press
[OK to continue. Select [Printer Setting] and press [OK] to continue.
1 2
Choose [LCD Adjustment] and
press [OK] to continue.
3
4
Choose an item for LCD
adjustment. Note that in LCD
adjustment, only the properties of
Contrast, Brightness, Color R/G,
Color B/Y, Position, and Default
Setting can be adjusted.
C. Special Function Instruction
LCD Adjustment
Standalone printing

1 2 3
Note that in color setting,
only the properties of
Contrast, Brightness,
Sharpness, Color R/G, Color
B/Y, and Position can be
adjusted.
4 5
Select a reference image
saved in the memory card for
color calibration, then press
[OK] to continue.
C. Special Function Instruction
Color Setting
Choose [SETUP], and press
[OK] to continue. Select [Printer Setting] and press [OK] to continue. Choose [Color Setting] and press [OK] to continue.
18
Standalone printing

19
1 2 3
Based on the printout of 4x4
or 4/2/4 sticker, adjust the
parameters in the A and B
column if needed, then
press [OK] to save values.
4 5
Place 4x4 or 4/2/4 sticker
into the paper cassette for
calibration reference.
C. Special Function Instruction
Print Position
Choose [SETUP], and press
[OK] to continue. Select [Printer Setting] and press [OK] to continue. Choose [Print Position] and press [OK] to continue.
Standalone printing