HITROL HT-100R Series Configuration guide

Magnetic Float Type
Liquid Level Transmitter
HITROL CO., LTD.
General Information
No. 2000-18E

General Information
HT-100R Series
2
TH -100R Series is a level transmitter to measure for liquids as installed in tank.
The installation and calibration are simple and can use to all kind of plants such as
retaw , oil, and chemical.
Waste water and sewage treatment plants
Filling and charging containers
Petrol tanks
Brewery plants
Drinking water plants
Interface measurement
ledoM
gnisuoH
Ambient T erutarepme
Temperature in T kna
Power Source
Conduit Conn.
Output Signal
Wet Parts Material
Connection Size
egnaR
Operating Pressure
erusolcnE
TH -100RS HT R001- T HT R001- V
Aluminium Casting or PC.
-20 ~ + 60
-15 ~ +80 Option : 150 ) -15 + 60
DC 24 V
PF 3/4 )F(
DC 4~20 mA
4 JIS 10K RF 4 JIS 10K FF
Max. 6000 mm
10 kg/cm2Max. 2 kg/cm2A MT
Weather Proof
Explosure Proof(Exd IIc T4, IP 65)
STS 304
(Option : SUS 316)
SUS 304
+ PTFE Lining
SUS 304
+ PVC Lining
A float moves with the liquid level
along a tubular transmitter in the
tank. An annular magnet located in
the float provides non-contact
operation through the wall of the
slide tube of miniature dry reed
contacts, by means of its magnet
field. These contacts tap a
measuring voltage which is
proportional to the level of the fluid.
Guide pipe
Float
Magnet
Reed switch
Stopper
It is assembled using the bolts
and nuts between flange and
flange after installed from top into
bottom of tank(The surface
between flange and flange have to
have gasket available using the
process). Please use to protection
tube when medium has waving in
.knat
Accuracy ± 1.0%

Cause
When output is 0 mA
When output is low 4 mA
When output is fixed any value
When output is hunting
When has difference value from 0 % to 100 %
Output is hunting, sometime
Check
Please check to power or wiring
Please check float or insert amplifier
Please check to moving of float or insert Amplifier or inside part of transmitter
Please check to power or insert amplifier or inside part of transmitter
Please re-calibration or check to insert Amplifier or inside part of transmitter
Please check to power or wiring orInside part of transmitter
Connection
3
General Information
HT-100R Series
Dimensions
Calibration
✽Please use to shield cable
separated(2C X 1.25Ø).
✽Separate to power line of plant.
✽Please have to have ground line.
HT-100RS HT-100RT HT-100RV
1. Please check the wiring.
2. Please provide DC 24V to level transmitter.
3. Zero calibration
①Please moving the float to bottom of probe and check whether indicator is indicating 0 percent(%) or 4mA.
②If no, calibrate to 4mA using the zero volume.
4. Span calibration
①Please moving the float to top of probe and check whether indicator is indicating 100 Percent(%) or 20mA.
②If no, calibrate to 20mA using the span volume.
5. Please calibrate to no. 3, 4 by two and three times.
Troubleshooting

General Information
HT-100R Series
HEAD OFFICE·FACTORY·R & D INSTITUTE
62-182 BONGILCHEON-RI CHORI-EUP
PAJU CITY KYUNGGI-DO KOREA
TEL : [phone]~7
FAX : [phone], 5600
http://www.hitrol.co.kr [email protected]
HITROL CO., LTD.
S
S
* Model
S : SUS
V : PVC
T : Teflon
* Wet Part Material
S1 : SUS 304
S2 : SUS 316
Option :
A : Protetction Tube
SUS or PVC
B : External Chamber C.S or SUS
* Enclosure
0 : Weather Proof
E : Ex-Proof (Ex d IIC T4 IP65)
* Pressure & Temperature
0 : 10 kg/cm2& 80℃
A : 10 kg/cm2& 150℃
S : Special Version
* Mounting Size
1 : Flange Size JIS 80A 10K FF 6t
2 : Flange Size JIS 80A 10K RF
3 : Flange Size JIS 80A 10K FF
4 : Flange Size 4"ANSI 150# RF
5 : Flange Size 4"ANSI 150# FF
S : Special Version
* Head Material
A : ADC 12 or PC
S : Special Version
* Measuring Length
1 : 100 mm Additional
S : Special Version
* Output Signal
A : 0-1kΩ
B : 4-20 mA DC
* Conduit Conn.
1 : PF 1/2"
2 : PF 3/4"
V T
VT
ORDER CODES
HT - 100R - 呼        
S1 : SUS 304 + PVC
Option :
A : Protection Tube
SUS or PVC
B : External Chamber SUS
S1 : SUS 304 + Teflon
Option :
A : Protection Tube
SUS or PVC
B : External Chamber SUS
O : ATM. & 60℃
S : Special Version
O : ATM. & 80℃
A : ATM. & 150℃
S : Special Version