HMS Networks Anybus Wireless Bolt LTE User manual

Anybus®Wireless Bolt LTE™
USER MANUAL
SCM-1202-164
Version 1.2
Publicaon date 2022-06-09
ENGLISH

Important User Informaon
Disclaimer
The informaon in this document is for informaonal purposes only. Please inform HMS Networks of any
inaccuracies or omissions found in this document. HMS Networks disclaims any responsibility or liability for any
errors that may appear in this document.
HMS Networks reserves the right to modify its products in line with its policy of connuous product
development. The informaon in this document shall therefore not be construed as a commitment on the
part of HMS Networks and is subject to change without noce. HMS Networks makes no commitment to update
or keep current the informaon in this document.
The data, examples and illustraons found in this document are included for illustrave purposes and are only
intended to help improve understanding of the funconality and handling of the product. In view of the wide
range of possible applicaons of the product, and because of the many variables and requirements associated
with any parcular implementaon, HMS Networks cannot assume responsibility or liability for actual use
based on the data, examples or illustraons included in this document nor for any damages incurred during
installaon of the product. Those responsible for the use of the product must acquire sucient knowledge in
order to ensure that the product is used correctly in their specic applicaon and that the applicaon meets all
performance and safety requirements including any applicable laws, regulaons, codes and standards. Further,
HMS Networks will under no circumstances assume liability or responsibility for any problems that may arise as
a result from the use of undocumented features or funconal side eects found outside the documented scope
of the product. The eects caused by any direct or indirect use of such aspects of the product are undened and
may include e.g. compability issues and stability issues.
Copyright © 2021 HMS Networks
Contact Informaon
Postal address:
Box 4126
300 04 Halmstad, Sweden
E-Mail: inf[email protected]

Table of Contents
1. Preface .................................................................................................................................. 1
1.1. About This Document ........................................................................................................ 1
1.2. Document Convenons ..................................................................................................... 1
1.3. Trademarks ..................................................................................................................... 2
2. Safety .................................................................................................................................... 3
2.1. General Safety ................................................................................................................. 3
2.2. Intended Use ................................................................................................................... 3
3. Preparaon ............................................................................................................................ 4
3.1. Support and Resources ...................................................................................................... 4
3.2. Network Environment ....................................................................................................... 4
3.3. SIM Card ......................................................................................................................... 4
3.4. Network Operator Cered Firmware .................................................................................. 4
3.5. Required Distance Between Devices ..................................................................................... 4
3.6. Firewall and Roung ......................................................................................................... 5
4. Installaon ............................................................................................................................. 6
4.1. Install SIM Card ................................................................................................................ 6
4.2. Mechanical Installaon ...................................................................................................... 7
4.3. Connect to Power Over Ethernet (PoE) ................................................................................. 8
4.4. Connect to Power and Ethernet ......................................................................................... 10
5. Conguraon ......................................................................................................................... 13
5.1. Before You Begin Conguraon .......................................................................................... 13
5.2. Connecng to PC and Power .............................................................................................. 13
5.3. Access the Built-In Web Interface ....................................................................................... 14
5.3.1. Required IP Address Sengs ...................................................................................... 14
5.3.2. Log In to the Built-In Web Interface ............................................................................. 15
5.4. Bolt LTE Built-In Web Interface ........................................................................................... 17
5.5. Factory Default Sengs .................................................................................................... 18
5.6. Ethernet Sengs ............................................................................................................. 19
5.7. Cellular Sengs .............................................................................................................. 21
5.7.1. Network Sengs ..................................................................................................... 21
5.7.2. APN Sengs ........................................................................................................... 22
5.7.3. SIM PIN and PUK Sengs .......................................................................................... 23
5.7.4. To Enable SMS Communicaon ................................................................................... 25
5.7.5. To Send SMS Messages to the Bolt LTE ......................................................................... 26
5.7.6. Nocaon SMS ...................................................................................................... 27
5.8. NAT/Port Forward Sengs ................................................................................................ 28
5.9. Posioning Sengs .......................................................................................................... 29
5.10. Seng Up with REST Commands ...................................................................................... 30
5.11. Lock Conguraon ......................................................................................................... 31
5.12. Unlock Conguraon ...................................................................................................... 31
5.13. To Save and Reboot ........................................................................................................ 31
6. Use Cases .............................................................................................................................. 32
6.1. Seng Up Bolt LTE with Automac APN Assignment .............................................................. 32
6.2. Set Up Bolt LTE as an Internet Router .................................................................................. 34
6.3. Set Up Bolt LTE with ULPM REST Command .......................................................................... 36
7. Verify Operaon ..................................................................................................................... 37
Anybus® Wireless Bolt LTE™
SCM-1202-164 Version 1.2

7.1. System Sengs and Network Connecon ............................................................................ 37
7.2. LED Status Indicaon ........................................................................................................ 38
8. Maintenance ......................................................................................................................... 39
8.1. Firmware Update ............................................................................................................ 39
8.2. Set Administrator Password ............................................................................................... 41
8.3. Sengs Backup ............................................................................................................... 41
8.3.1. Create Sengs Backup File ........................................................................................ 41
8.3.2. Restore Sengs From Backup File ............................................................................... 42
8.4. Reboot System ................................................................................................................ 42
9. Troubleshoong ..................................................................................................................... 43
9.1. Logs .............................................................................................................................. 43
9.2. Diagnoscs ..................................................................................................................... 44
9.2.1. Cellular Diagnoscs .................................................................................................. 44
9.2.2. Historic Diagnoscs .................................................................................................. 44
9.2.3. Network Diagnoscs ................................................................................................. 45
9.3. Data Connecon Terminaon ............................................................................................ 47
9.4. Find the Bolt LTE IP Address ............................................................................................... 48
9.5. Reset and Recovery .......................................................................................................... 48
9.5.1. Reset Buon ........................................................................................................... 48
9.5.2. Factory Reset .......................................................................................................... 49
10. Technical Data ...................................................................................................................... 50
10.1. Technical Specicaons ................................................................................................... 50
11. Reference Guides .................................................................................................................. 51
11.1. SMS Commands and Returns ........................................................................................... 51
11.1.1. Available Commands .............................................................................................. 51
11.1.2. SIM Card ID ........................................................................................................... 52
11.1.3. System Informaon ................................................................................................ 53
11.1.4. IP Address ............................................................................................................. 54
11.1.5. MAC Address ......................................................................................................... 54
11.1.6. Mast .................................................................................................................... 55
11.1.7. Phys ..................................................................................................................... 55
11.1.8. Ping Desnaon ..................................................................................................... 56
11.1.9. Posion ................................................................................................................ 56
11.1.10. Reboot ............................................................................................................... 57
11.1.11. Version ............................................................................................................... 58
Anybus® Wireless Bolt LTE™
SCM-1202-164 Version 1.2

1. Preface
1.1. About This Document
This document describes how to install and congure Anybus® Wireless Bolt LTE™.
For addional documentaon and soware downloads, FAQs, troubleshoong guides and technical support,
please visit www.anybus.com/support.
1.2. Document Convenons
Lists
Numbered lists indicate tasks that should be carried out in sequence:
1. First do this
2. Then do this
Bulleted lists are used for:
• Tasks that can be carried out in any order
• Itemized informaon
User Interacon Elements
User interacon elements (buons etc.) are indicated with bold text.
Program Code and Scripts
Program code and script examples
Cross-References and Links
Cross-reference within this document: Document Convenons (page 1)
External link (URL): www.anybus.com
Safety Symbols
DANGER
Instrucons that must be followed to avoid an imminently hazardous situaon which, if not avoided,
will result in death or serious injury.
WARNING
Instrucons that must be followed to avoid a potenal hazardous situaon that, if not avoided, could
result in death or serious injury.
CAUTION
Instrucon that must be followed to avoid a potenal hazardous situaon that, if not avoided, could
result in minor or moderate injury.
IMPORTANT
Instrucon that must be followed to avoid a risk of reduced funconality and/or damage to the
equipment, or to avoid a network security risk.
Preface Anybus® Wireless Bolt LTE™
SCM-1202-164 Version 1.2 Page 1 of 60

Informaon Symbols
NOTE
Addional informaon which may facilitate installaon and/or operaon.
TIP
Helpful advice and suggesons.
1.3. Trademarks
Anybus® is a registered trademark and Wireless Bolt LTE™ is a trademark of HMS Networks AB.
All other trademarks are the property of their respecve holders.
Anybus® Wireless Bolt LTE™Trademarks
Page 2 of 60 SCM-1202-164 Version 1.2

2. Safety
2.1. General Safety
CAUTION
This equipment emits RF energy in the ISM (Industrial, Scienc, Medical) band. Make sure that all
medical devices used in proximity to this equipment meet appropriate suscepbility specicaons
for this type of RF energy.
CAUTION
This equipment contains parts that can be damaged by electrostac discharge (ESD). Use ESD
prevenon measures to avoid damage.
CAUTION
Minimum temperature rang of the cable to be connected to the eld wiring terminals, 90 °C.
CAUTION
Use copper wire only for eld wiring terminals.
CAUTION
This equipment is recommended for use in both industrial and domesc environments. For industrial
environments it is mandatory to use the funconal earth connecon to comply with immunity
requirements. For domesc environments the funconal earth must be used if a shielded Ethernet
cable is used, in order to meet emission requirements.
2.2. Intended Use
The intended use of this equipment is as a communicaon interface and router.
The equipment receives and transmits data over Ethernet and Cellular standard networks.
Safety Anybus® Wireless Bolt LTE™
SCM-1202-164 Version 1.2 Page 3 of 60

3. Preparaon
3.1. Support and Resources
For addional documentaon and soware downloads, FAQs, troubleshoong guides and technical support,
please visit www.anybus.com/support.
TIP
Have the product arcle number available, to search for the product specic support web page. You
nd the product arcle number on the product cover.
3.2. Network Environment
Ensure that you have all the necessary informaon about the capabilies and restricons of your local network
environment before installaon.
3.3. SIM Card
Prepaid Data Plan
If a prepaid data plan is used, ensure that:
• the data amount is sucient
• that any SMS nocaons are sent to a monitored number
3.4. Network Operator Cered Firmware
You may need to install a rmware cered for the operator you are going to use, it is not possible to connect
the Bolt LTE to the operator network otherwise.
Before you start to congure the Bolt LTE sengs:
• Ensure that the current rmware installed on the Bolt LTE is valid for the network operator you are going to
use.
• You nd the rmware version number in the Bolt LTE built-in web interface Overview page. See Bolt LTE
Built-In Web Interface (page 17).
• If you need to install a rmware version cered for your network operator:
Download the rmware update le, specic for your network operator, from www.anybus.com/support.
• For informaon on how to update the rmware, see Firmware Update (page 39).
3.5. Required Distance Between Devices
For opmal recepon, cellular devices should not be conned in buildings made of concrete or metal, without
windows.
To avoid interference, a minimum distance of 50 cm between cellular devices should be observed.
At least 20 cm separaon distance between the device and the user’s body must be maintained at all mes.
See Wireless Technology Basics.
Anybus® Wireless Bolt LTE™Preparaon
Page 4 of 60 SCM-1202-164 Version 1.2

3.6. Firewall and Roung
There are roung opons set for the system.
By default, the rewall allow roung of:
• Outgoing trac for TCP, UDP and ICMP (for IPv4 only).
• Incoming trac for already established connecons only.
For other possible conguraons, see NAT/Port Forward Sengs (page 28).
Firewall and Roung Anybus® Wireless Bolt LTE™
SCM-1202-164 Version 1.2 Page 5 of 60

4. Installaon
4.1. Install SIM Card
NOTE
Supported SIM card types are Nano SIM for IoT and M2M, for data communicaon, as well as
standard mobile phone Nano SIM.
Figure 1. Insert SIM card
To connect Bolt LTE to a cellular data network, install a cellular SIM card:
1. Insert a SIM card into the Bolt LTE SIM card holder.
NOTE
Ensure that the SIM card contact surface is facing towards the Ethernet port.
Anybus® Wireless Bolt LTE™Installaon
Page 6 of 60 SCM-1202-164 Version 1.2

4.2. Mechanical Installaon
Placement
• The device is intended to be mounted on top of a machine or cabinet through an M50 (50.5mm) hole using
the included sealing ring and nut.
• The top mounng surface, in contact with the sealing, must be at with a nish equivalent to Ra 3.2 or ner
and cleaned and free from oils and greases.
• For opmal recepon, cellular devices require a zone around them clear of objects that could obstruct or
reect the signal.
To avoid interference, a minimum distance of 50 cm between Bolt LTE and other cellular devices should be
observed.
Installaon
IMPORTANT
Make sure that the sealing ring is correctly placed in the circular groove in the top part of the
housing before ghtening the nut.
IMPORTANT
Always hold the BOTTOM part of the unit when unghtening the nut, not the top part (the cap).
Tightening torque: 5 Nm ±10 %
All measurements are in mm.
Figure 2. Installaon drawing
Mechanical Installaon Anybus® Wireless Bolt LTE™
SCM-1202-164 Version 1.2 Page 7 of 60

4.3. Connect to Power Over Ethernet (PoE)
Before You Begin
IMPORTANT
Connecng the Bolt LTE to PoE and DC power simultaneously may result in a current loop that could
damage both the power sources and the Bolt LTE. Ensure to use only one of the power connecons
at a me.
NOTE
Shielded or unshielded Ethernet cables may be used.
NOTE
Bolt LTE is designed to comply with PoE, IEEE 802.3at Type 1 (Class 0, 37-57 VDC, max 12.95 W).
Procedure
Figure 3. Connect to Power Over Ethernet (PoE)
Connect the Bolt LTE Ethernet port to Ethernet/PoE.
Anybus® Wireless Bolt LTE™Connect to Power Over Ethernet (PoE)
Page 8 of 60 SCM-1202-164 Version 1.2

Table 1. Ethernet Connector, RJ45 PoE
Pin Data PoE
1 TD+
A+ Posive power from alt. A PSE
2 TD-
3 RD+ A- Negave power from alt. A PSE (with pin 6)
4
N/A B+ Posive power from alt. B PSE
5
6 RD- A- Negave power from alt. A PSE (with pin 3)
7
N/A B- Negave power from alt. B PSE
8
Housing Shield Funconal Earth (FE), via 1 nF capacitor and 1 MΩ bleeder resistor
Connect to Power Over Ethernet (PoE) Anybus® Wireless Bolt LTE™
SCM-1202-164 Version 1.2 Page 9 of 60

4.4. Connect to Power and Ethernet
Before You Begin
CAUTION
Connecng power with reverse polarity or using the wrong type of power supply may damage the
equipment. Make sure that the power supply is connected correctly and of the recommended type.
IMPORTANT
Connecng the Bolt LTE to PoE and DC power simultaneously may result in a current loop that could
damage both the power sources and the Bolt LTE. Ensure to use only one of the power connecons
at a me.
IMPORTANT
When Bolt LTE is powered via the power connector, Funconal Earth (FE) must be connected.
NOTE
When Bolt LTE is installed in an environment with a high level of electrical noise, use a power/
Funconal Earth (FE) cable with a maximum length of 3 meters.
See also Technical Data (page 50) regarding power supply requirements.
Funconal earth wire screw placement
When Bolt LTE is mounted on a sheet metal plate, connect Funconal Earth (FE) to the plate near Bolt LTE.
Figure 4. Funconal earth wire screw placement
Anybus® Wireless Bolt LTE™Connect to Power and Ethernet
Page 10 of 60 SCM-1202-164 Version 1.2

Procedure
Connect to power and Funconal Earth (FE)
Figure 5. Power and Funconal Earth (FE)
1. Connect Bolt LTE Power connector to a power supply.
2. Connect Bolt LTE Power connector to Funconal Earth (FE).
Table 2. Power connector, 3-pin terminal block
Pin Funcon
1 +
11-33 VDC
2 -
3Funconal Earth (FE)
Connect to Power and Ethernet Anybus® Wireless Bolt LTE™
SCM-1202-164 Version 1.2 Page 11 of 60

Connect to Ethernet
3. Connect the Bolt LTE to Ethernet.
Figure 6. Connect to Ethernet
Anybus® Wireless Bolt LTE™Connect to Power and Ethernet
Page 12 of 60 SCM-1202-164 Version 1.2

5. Conguraon
5.1. Before You Begin Conguraon
By default, the Bolt LTE APN Assignment is set to automacally search for the SIM card APN seng and assign it
to the Bolt LTE.
In cases where no addional conguraon of the sengs in the Bolt LTE built-in web interface is required, see
Seng Up Bolt LTE with Automac APN Assignment (page 32).
5.2. Connecng to PC and Power
When conguring Bolt LTE it must be connected to a PC.
Figure 7. Connect to PC and Power
1. Connect the Bolt LTE Ethernet port to your PC.
2. Connect the Bolt LTE Power connector to a power supply.
Conguraon Anybus® Wireless Bolt LTE™
SCM-1202-164 Version 1.2 Page 13 of 60

5.3. Access the Built-In Web Interface
5.3.1. Required IP Address Sengs
To be able to access the Bolt LTE built-in web interface you may need to adjust the IP sengs, choose one of the
following methods.
NOTE
The Bolt LTE default IP address is 192.168.0.98 and the subnet mask is 255.255.255.0.
Opon 1 - Enable DHCP on Your PC
When DHCP is enabled on the PC accessing the Bolt LTE, you do not need to change the IP address sengs for
the Bolt LTE to be able to access the Bolt LTE built-in web interface.
Opon 2 - Set a Stac IP Address on Your PC
On the PC accessing the Bolt LTE built-in web interface, set a stac IP address within the same IP address range as
the Bolt LTE IP address.
NOTE
When you change to a stac IP address on your PC, internet access is lost.
Result
NOTE
The Bolt LTE comes with a default username and password. The default username is admin, wrien
in lowercase leers. You nd the default password on the Bolt LTE product housing.
Now you can enter the Bolt LTE IP address in your web browser and search to access the built-in web interface
login page.
See Log In to the Built-In Web Interface (page 15).
Anybus® Wireless Bolt LTE™Access the Built-In Web Interface
Page 14 of 60 SCM-1202-164 Version 1.2

5.3.2. Log In to the Built-In Web Interface
The Bolt LTE built-in web interface can be accessed from a standard web browsers.
Before You Begin
IMPORTANT
Before installing Bolt LTE on a network, change the default administrator password.
IMPORTANT
Before installing the Bolt LTE on a network, change the Bolt LTE default username and password.
NOTE
The Bolt LTE comes with a default username and password. The default username is admin, wrien
in lowercase leers. You nd the default password on the Bolt LTE product housing.
NOTE
The Bolt LTE default IP address is 192.168.0.98 and the subnet mask is 255.255.255.0.
Procedure
Login to the Bolt LTE built-in web interface
1. Open a web browser.
2. Click to select the Address bar and enter hp:// and the Bolt LTE IP address.
Figure 8. Enter IP address in web browser
3. Press Enter.
The built-in web interface login screen appears.
4.
Figure 9. Built-in web interface login screen
Access the Built-In Web Interface Anybus® Wireless Bolt LTE™
SCM-1202-164 Version 1.2 Page 15 of 60

Result
You are logged in to the System Overiew page.
Figure 10. System Overiew page
Anybus® Wireless Bolt LTE™Access the Built-In Web Interface
Page 16 of 60 SCM-1202-164 Version 1.2