WIN Enterprises PL-80150 User manual

?
?
2U Rackmount Dual Inte l® Sandy Bridge-EP / Ivy Bridge-EP E5-26 600 Series
Processor and C604 PCH Network System, 8 PCIe x8 supports LAN expansion modules,
IPMI, 2 USB , 1 SATA HDD , 2 GbE, CF, 1 PCIe x8 slot, redundant PSU
PL-80150
Networking Appliance
User’s Manual
Version 1. 2

evision History
Date Version Modification Editor
20113/08/07
1.0 First Release Denny Huang
20113/08/17
1.2 Fixed one error to Operation for R287
screen infor ation & Syste Screen
supporting definition
Denny Huang
© Copyright 2013. All ights eserved.
This docu ent contains proprietary infor ation protected by copyright.
All rights are reserved; no part of this anual ay be reproduced,
copied, translated or trans itted in any for or by any eans without
prior written per ission of the anufacturer.
The content off this docu ent is intended to be accurate and reliable;
the original anufacturer assu es no responsibility for any
inaccuracies that ay be contained in this anual . The original
anufacturer reserves the right to ake i prove ents to the pro
ducts described in this anual at any ti e without prior notice.
Trademarks
IBM, EGA, VGAA, XT/AT, OOS/2 and PSS/2 are registered trade arks
off International Business Machine Corporation, Award is a trade ark
of Award Software International, Intel is a trade ark of Intel is a
trade ark of Realtek VIAA is a trade ark of VIA Technologies, Inc
Microsoft, Windows, Windows NT and MS-DOSS are either trade arks
or registered trade arks of Microsoft Corporation All other product

na es entioned herein are used for identification purpose only and
ay be trade arks and/or registered trade arks of their respective
co panies
Limitation of Liability
While reasonable efforts have been ade to ensure the accuracy of
this docu ent, the anufacturer and distributor assu e no liability
resulting fro errors or o issions in this docu ent, or fro the use
off the infor ation contained herein. For ore infor ation on
PL-80150 or other WIN products, please visit our website
http://www.win-enterprises.co For technical support please send
your inquiries to [e-mail] .

Contents
Chapter 11. General Information
1.1
Introduction
1.2
Specifications
1.3
Ordering
Infor ation
1.4
Packaging
1.
5
Precautions
1.6
Syste Layout
1.7
Di ensions
Chapter 22. Connector/Jumper Configuration
2.11 MB-80150 (SBC) Connector/Ju per Location and Definition
2.22 R285 Connector/Ju per Location and Definition
2.33 R286 Connector/Ju per Location and Definition
2.44 R287 Connector/Ju per Location and Definition
Chapter 33. Optional LAN Module and Add on card
3.1 R287: IPMI card with VGAA support
3.2 R288: Ethernet odule with eight GbE SFP
3.3 R289: Ethernet odule with eight GbE Copper
3.4 R290: Ethernet odule with two 10GbE SFPP+
3.5 R286: Front I/O Module
Chapter 4. BIOS Setup
4.1 Quick Setup
4.2 Entering the CMOS Setup
4.3 Menu Options
4.4 Advanced Menu
4.5 Chipset Server
4.6 Boot Security
4.7 Save & Exit

5.11 Operation Syste Support
5.22 Syste Driver Installation
5.33 LAN Driver Installation
Appendix
Appendix A: Linux / DOS Sa ple Code
Appendix B: Cable Develop ent Kit
1.11 Introduction
The PL-801500, an Intel® Sandy Bridge-EP / Ivy Bridge-EP Xeon processor-based
platfor , was developed for axi u perfor ance, scalability and functionality in a
2U network service appliance. Two Intel® QuickPath Interconnects running up to
8.0GT/ss speeds which can co bine with h Intel® Xeon® E5-2600 series processor
(Socket RR) in their respective two sockets can reduce cross-socket e ory I/OO
latencies and increase throughput. Two E 5-2600 series processor with up to 10
cores, 20MBB cache an d latest PCIe 3.0 interface which provide a total of 80 PCIe
lanes up to 8Gbps per lane. Each CPU socket supports 4 DDRR3 channels with
speeds up to 16600/1866 MHz and axi u capacity up too128 GB of ECC e ory
when using the latest LR DDIMM technology. The Intel® C6004 chipset supports
standard platfor I/O and highest speed ass storage which supports one 33.5”
SATA hard disks or solid state drives. The SCB-96550 platfor can offer different
types of expansion odule; such as 10Gigabit SFP+, Gigabit copper with by-pass
function and Gigabit fiber ports. Tithe ax capacity can provide 644 ports.
1.22 Specifications
CPU Supports Quad Intel® Sandy
Bridge-EP/Ivy Bridge-EP E5-2600
series, LGA 2011
Chipset Intel® Patsburg C604 PCH
QPI QPI up to 8GT/s
Processor
System
BIOS AMI® 64Mbit BIOS
Technology Total 8 DIMMs (Four channels per
CPU, one DIMM per channel, four
DIMMs per CPU)
1. ECC/Registered DDR3 1600/1866
MHz e ory, up to 16 GB per DIMM
2. LRDIMM: DDR3 1600 MHz, up to
16GB per DIMM
Memory
Capacity ECC UDIMM/RDIMM: up to 128GB
LR-DIMM: up to 128GB

Expansion Expansion
Slots
1. One SO-DIMM slot IPMI card
with VGA support
2. One PCIe x8 slots in PCIe x16
slot
3. 8 x PCIe x8 connector for
expansion LAN odule
Ethernet Ethernet
Modules
(Optional)
R288: 8 x SFP GbE ports, Intel
82580EB
R289: 8 x RJ45 GbE ports with two
pairs bypass, Intel 82580EB
R290: 2 x 10GbE SFP+ ports, Intel
82599ES
R293: 2 x 10GbE RJ45 ports, Intel
X540-BT2
Hardware
Acceleration
Modules
Crypto-
graphics
Optional: Caviu CN3530 odule
SATA HDD One 3.5" SATA HDD
RAID Supports software, RAID 0,1,5,10
Storage
Co pactFlash One Co pactFlash Type I/II
USB Port Two external USB 2.0
Console Port One Rj45 console port (COM1,
RS232)
Manage ent
Port
One GbE port, Intel 82574L
One IPMI port support
Front Panel
Accessible
I/O
Display Port One VGA pin header R287 needs
plug in R286 (optional)
Power Supply Watt 2U 810W ATX redundant power
supply
For Factor 2U rack ount appliance
LCD Module One 16 x 2 LCD display
Keypad Four-button keypad
LEDs One Power LED (Green)
One HDD LED (Yellow)
One Status LED (Green/Yellow via
progra able GPIO)
Di ensions 430 (W) x 626 (D) x 88
(H); 16.9" W x 24.6" D x 3.4" H
Operating
Te perature
0° ~ 40°C (32° ~ 104°F)
Storage
Te perature
-20° ~ 75°C (-4° ~ 167°F)
Mechanical
and
Environmental
Hu idity 10 ~ 85% relative hu idity,
non-operating, non-condensing
Weight 1 pc/CTN, 20 kgs
Certifications CE/FCC
Ordering Information

PL-80150 2U rack ount dual Intel Sandy Bridge-EP / Ivy
Bridge-EP Xeon ES-2600 Series processor and C604
PCH Network Syste , 8X PCIe x8 expansion LAN
odule, 2 USB, 1 SATA HDD, 2 GbE, CF, 1 PCIe x8
slot
R287A IPMI card with VGA support
R288A Expansion odule with 8 SFP, Intel 82580EB
R289A Expansion odule with RK45 GbE ports, Intel
82580EB
R290A Expansion odule with 2 SFP+ 10 GbE ports, Intel
82599ES
R293A Expansion odule with 2 RJ45 10GbE ports, Intel
x540-BT2
DK002 Cable Expansion Kit
CB-CO5204-00 cross over 2M
CB-DB9200-01 null ode cable 2M
CB-EC5200-00 Ethernet Cat. 5 cable 2M
CB-IPS200-00 KBMS cable, 15c
CB-IUS2B-00USB cable, 25c
CB-IVGA-00 VGA cable, 20c
CB-RJDB91-00 RJ-45 to DB-9 cable 2M

1.44 Packaging
Please ake sure that the following ite s have been included in the
package before installation.
1PL-80150 Appliance
2Cables (Optional)
3CD-ROM that contains the following folders:
- Manual
- Syste Driver
- Utility Tools

If any of the above ite s are issing or da aged, please contact your
dealer or retailer fro who you purchased the PL-80150. Keep the
box and carton when you probably ship or store PL-80150 in near
future. After you unpack the goods, inspect and ake sure the
packaging is intact. Do not plug the power adapter to the appliance of
PL-80150 if you already find it appears da aged.
Note: Keep the PL-80150 in the original packaging until you start
installation.
1.55 Precautions
Please ake sure you properly ground yourself before handling the
PL-80150 appliance or other syste co ponents. Electrostatic
discharge can be easily da age the PL-80150 appliance.
Do not re ove the anti-static packing until you are ready to install the
PL-80150 appliance.
Ground yourself before re oving any syste co ponent fro its
protective anti-static packaging. To ground yourself, grasp the
expansion slot covers or other unpainted parts of the co puter
chassis.
Handle the PL-80150 appliance by its edges and avoid touching the
co ponents on it.

1.6 System Layout
Front Panel Features
ear panel features

1.7 Dimensions

Chapter 22. Connector/Jumper Configuration
2.11 MB-80150 SBC Connector/Jumper Locations and Definitions
Connector/Jumper Locations & Definitions
Connector Definitions
FAN, FAN3, FAN5,
FAN7 , FAN9
S art Fan connector for Hot-swappable
FAN
FAN2 , FAN4, FAN6,
FAN8, FAN11
4 pin S art FAN Connector
FAN 10 FAN connector
CN1 ATX switch pin header
CN2 PCI-Ex16 slot (x8 signal)

CN3-8 QPI & PCI-E BUS
CN9 CPU0 S art FAN
CN10 CPU1 S art FAN
CN11, CN12 +12V connector
SW1,2 CPU I D Switch
FAN1 、 FAN3 、 FAN5 、 FAN7 、 FAN9: Smart FAN connector for
Hot-swappable FAN module
Pin Definitions
1 GND
2 Speed Detect2
3 ++12V
4 N/A
5 Speed Detect1
6 N/A
7 Speed Control

FAN2 , FAN4 , FAN6, FAN8, FAN11: 4 pin Smart FAN Connector
Pin Define
11 GND
22 +12V
33 Speed Detect
44 Control
FAN 10: FAN connector
Pin Definitions
1 GND
2 +12V
3 Speed Detect

Pin Define
1 GND
2 PS_ON#
CN9-10 ： CPU SMA T FFAN
Pin Definition
1 GND
2 +12V
3 Speed Detect
4 Control

SW1 , SW2: CPU ID
Pin Setting
B-C CPU0++1 (CB-96550)
2.22 285 Connector/Jumper Location and Definition

Connector/Jumper Locations & Definitions
Connector Definitions
FAN1 FAN connector
CN1,2 SATA POWER connector
CN3,4,7,8 CPU0 PCI-E connector
CN5,6,9,10 CPU1 PCI-E connector
CN11 DMMI & CPLD BUS For R2 86
CN12 +5V/+3.3V connector For
RR286
CN13 ATX I2C p pin header
CCN14, 15 ,
16 +12V input (8Pin)
CN18-233 CPPU0/1 QPI & PCI-E BUS
CN24 +12V output for CPU1
CN25 +12V output for CPU0
FAN 1: FAN connector CN11-2 ： SATA power connector
1 GND

2 +12V
3 Speed Detect
Pin Define
1 +12V
2 GND
3 GND
4 +5V
CN13 ： ATX I 2C pin header put (8Pin)
Pin Define
1 SMBCLK
2 SMBDATA
3 PPCH_GP31
4 N/A
5 N/A
CN 14, 15, 16 +12V input (8Pin)

Pin Define Pin Definitions
1 Ground 5 +12V
2 Ground 6 +12V
3 Ground 7 +12V
4 Ground 8 +12V
2.3 R286 Connector/Jumper Locations and Definitions
Connector/Jumper Locations & Definitions
Connector Definitions
FAN 1-2 FAN connector
CN1 ++5V/+3.3V power input
CN2--5 SATA connector
CN6 DMI & CPLD BUS
CN7 JTAG
CN8 GPO pin header
CN9 SPI progra ing
CN10 VGA pin header

CN11 LPC pin Header
CN12 RESET pin header
CN13 Case open pin header
CN14 GPI pin header
CN15 COM2 box header
CN16 Keypad pin header
CN17 LCM pin header
CN18 PS2 KB/MS pin header
CN19 Giga LAN RJ45 connector *2port
CN20--21 USB1/2 connector
CN22 COM1 RJ455 connector
SW1 Clear CMOS
SW2 Watchdog function
SW3 ATX Switch function
DIMM1 IPMI connector
CF1 CF connector
FAN 1-2: FAN connector
Pin Definitions
1 GND
2 +12V
3 Speed Detect