Hodedah HID8600-G User manual

Assembly Instructions
This instruction booklet contains important safety information, please read and keep for future reference.
HODEDAH ®
ITEM # HID8600-G
2 DOOR WARDROBE
2 people
90 mins
1 YR LTD
2 Boxs
FRONT VIEW BACK VIEW
www.Hodedah.com 1| Page
Product Dimensions: Height 71.61" x Width 31.50" x Depth 16.73"
Weight Capacity Per Shelf 30lbs

HODEDAH ®
www.Hodedah.com 2| Page
DO NOT RETURN PRODUCT TO THE STORE
Phone WebsiteEmail
Questions, need parts, we are here to help!
WARRANTY
WARNING
If parts are missing or damaged please contact our customer service team and we will
gladly ship your replacement parts FREE of charge within ONE YEAR of purchase!
Hodedah warrants this product to be free from defects in materials and workmanship and agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is solely
limited to replacement of defective parts and no assembly for labor is included. This warranty does not
apply to any product that has been improperly assembled, subjected to misuse, abuse or which has been
altered or repaired in any way. To obtain warranty service, original purchaser must present the following;
original bill of sale, date of purchase, where the product was purchased and images if applicable.
Components replaced warranted through the remainder of the original warranty only. The defective part
will be replaced without charge, subject to the terms and conditions described above.
Mon - Fri | 9:30 am to 5pm EST Send us an email
FOR PROMPT, RELIABLE SERVICE PLEASE HAVE YOUR INSTRUCTION MANUAL READY
Visit our website to open a case
1 - 855 - HODEDAH
1 - 855 - 463 -3324
[email protected] www.Hodedah.com
·This product contains small parts, keep away from children.
·This product contains plastic bags, keep away from children.
·Serious or fatal crushing injuries can occur from furniture tip-over. To help
prevent this, place heaviest items on the lower shelves and drawers. Do not set
heavy objects on top shelves and drawers.
·Never allow children to climb or hang on drawers, shelves and doors.
·Never open more than one drawer at a time.
·The use of tip-over restraints may reduce but not eliminate the risk of tip-over.

HODEDAH ®
www.Hodedah.com 3| Page
Product Care and Maintenance
Let's get started…
·Never open more than one drawer at a time.
·The use of tip-over restranits may reduce but not eliminate the risk of tip-over.
·Make sure you receive all boxes. If your item is packed in one box, box count will read 1
of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second
box will read 2 of 2.
·Read each step carefully. It is very important that each step is performed in the correct
order. If these steps are not followed in sequence, assembly difficulties will occur.
·Work in a spacious level area, preferably carpet, near the place the unit will be used.
·DO NO USE power tools to assemble your furniture, it will strip and damage parts.
·Your package should include the following hardware and parts. Parts are labeled or
stamped on the raw edge. Please inspect contents to ensure you have received all
components. If you are missing any hardware or parts please contact customer
service right away before assembly.
Helpful hints, read before beginning assembly
Assembly Tools Required (not supplied)
·Wipe clean with dry soft cloth, never use chemicals or cleaning products they will
damage the finish.
·Avoid placing your furniture in direct sunlight, as sunlight causes fading.
·Never push, drag or pull your furniture, to move to a new location carefully with
two or more people carry the unit to its new location.
·Avoid extreme changes in temperature by arranging furniture away from radiators,
heat and air vents and air conditioning units.
Hammer Phillips Screwdriver No Power Tools NeededTape Measure

HODEDAH ®
www.Hodedah.com 4| Page
Hardware List
Accessories
1QTY
Screw M6 x 40mm
3
QTY
29 Pcs
4
QTY QTY
6
QTY QTY
Pvc Dowel
7QTY 8QTY
Nail
35 Pcs
10 QTY
Allen Key
11 QTY 12 QTY 13 QTY
5
9QTY
2 Pcs
4 Pcs
Important
1. Before you throw the package, please use the Check Box to identify the parts
and hardware to ensure that you have everything you need.
2. Check and measure the bolts before applying them to parts.
3. Do not completely tighten all hardware until the entire assembly is complete,
unless indicated otherwise.
14 QTY
18 Pcs
12 Pcs
Shelf Support
1 Pc
1 Pc
Handle
Screw M4 X 20mm
2
Screw M3.5 x 14mm
28 Pcs
*For # 5 HINGERS
Hinges
6 Sets 12 Pcs
Screw M 10 X 1/2 MM
V-Bracket
2 Pcs
Screw M6 x 50mm
4 Pcs
Pvc Cap
22 Pcs
Hanging Rod
(separate from
hardware pack)
Anti-Tip Kit
1 PK

HODEDAH ®
www.Hodedah.com 5| Page
AQTY
1 Pc
BQTY CQTY
1 Pc
DQTY
1 Pc
EQTY FQTY
1 Pc 1 Pc
GQTY HQTY IQTY
3 Pcs 2 Pcs
Parts List
JQTY KQTY
Right Side Panel
1791 x 394 x 15mm
Bottom Panel
768 x 377 x 15mm
Kick Panels
768 x 89 x 15mm
Right Door
1697 x 395 x 15mm
Back Strengthening Panel
768 x 76 x 15mm
Kick Panel (Back) & Back
Strengthening Panel
768 x 394 x 15mm
Left Side Panel
1791 x 394 x 15mm
Left Door
1697 x 395 x 15mm
Top Panel
803 x 425 x 30mm
Partition Panel
768 x 377 x 15mm
Kick Panel (Back) & Back
Strengthening Panel
768 x 39 4 x 75mm
1 Pc
1 Pc
1 Pc 1 Pc
MQTY
Back Panels
1030 x 397 x 3mm
1 Pc
QTY
2 Pcs
LAdjust Panel
768 x 381 x 15mm

HODEDAH ®
www.Hodedah.com 6| Page
The Breakdown

HODEDAH ®
www.Hodedah.com 7| Page
Pre - Assembly
6
SCREW M 10 X 1/2 MM
12 Pcs.
8
2
54
Screw M3.5 x 14mm
16 Pcs.
Pvc Dowel
4 Pcs.
8
5
2
HINGES
6 Pcs.
SHELF SUPPORT
12 Pcs.
V-BRACKET
2 Pcs.
11
1.Insert the PVC dowels ④on top of panel Aand Husing
hammer to gently tap them in.
2.Fasten V-Bracket ⑪onto panel Aand Hby
using 2 screws ②.
3.Insert 6 shelf supports ⑥onto panel A
and H.
4.Place hinges ⑤on panel Aand
H. Then fasten them with 2 screws
②and 2 screws ⑧.
4
4
2
11
6
6
6
6
6
6
PANEL A
4
4
2
11
6
6
6
6
6
6
PANEL H

HODEDAH ®
www.Hodedah.com 8| Page
Pre - Assembly
Pvc Dowel
25 Pcs.
4
Insert dowels ④to panel B,
C, D, E, Fand Gusing
hammer to gently tap them in.
PANEL G
4
4
4
4
PANEL D
4
4
4
4
PANEL C
4
4
4
4
PANEL F
4
4
4
4
PANEL E
4
4
4
4
PANEL B
4
4
4
4
4

HODEDAH ®
www.Hodedah.com 9| Page
Door Panel Assembly
9
9
2
5
9
9
9
9
J K
Screw M3.5 x 14mm
12 Pcs.
2
5HINGERS
6 Pcs.
9Handle
2 Pcs.
9Handle Screw
M4 x 20mm
4 Pcs.
2.Fasten 2
screws ⑨from
inner side of
panel Jand K
into handle ⑨.
1.Insert 6 Hinges ⑤
into door panel Jand
K.Fasten screws ②
through hinges ⑤.

HODEDAH ®
www.Hodedah.com 10| Page
Step 1
Screw
M 6 x 40mm
9 Pcs.
1
Allen Key
1 Pc.
10
1.Place panel Bonto panel Eby
inserting panel B's dowels into panel E
's non-thru holes.
2.Place panel B,C,D,E,F and G
onto left side panel Aby inserting the
dowels onto left side panel A 's
non-thru holes.
3.Use allen key ⑩to fasten screws ①
from thru holes of left side panel A.
1
1
1
1
1
1
1
1
1
AE
F
D
C
B
G