Hodedah HI 599 TWIN User manual

HODEDAH
ASSEMBLY INSTRUCTIONS
METAL BED
HI 599 TWIN
1

HODEDAH
IMPORTANT NOTE :
.This product contains small compenents, please ensure that they
are kept away from small children.
.This instruction booklet contains IMPORTANT safety information.
Please read and keep for future reference.
.Note : you will find extra screws and bolts in hardware pack in case
of any missing pieces.
. If the glass is chipped or broken, do not attempt to assemble the item.
STOP
DO NOT RETURN PRODUCT TO THE STORE
If a part is missing or damaged, email our customer
service. We will gladly ship your replacement parts
FREE of charges.
Need Parts or Assistance ?
Email us at
[email protected]
For prompt, reliable service, please have your
assembly manual ready.
2

HODEDAH
3
Thank you for purchasing from Hodedah
To learn more about Hodedah and our products visit
www.hodedah.com
READ BEFORE BEGINING ASSEMBLY
- Read each step carefully. It is very important that each step of instruction is performed in the
correct order. If these steps are not followed in sequence, assembly difficulties will occur.
- Make sure all parts are included. Most parts are labeled or stamped on the raw edge.
- Work in spaclous area, preferably on a carpet, near the placethe unit will be used.
- Do not use power tool assemble your future. Power tools may strip or damage the parts.
HELPFUL HINTS
- Call us if you need assistance.
- Move your new furniture carefully, with two people lift and carry the nuit to it's new location.
- Never push, drag or pull your furniture ( especially on carpet ).
Warranty Information
Hodedah warrants this product to be free defect in material and workmanship agrees to
remedy any such defect. This warranty covers one year from the date of original purchase.This is
solely limited to be repair or replacement of defective parts and no assembly labor is included.
This warranty does not apply to any product which has been improperly assembled, sebjected to
misuse or abuse or which has been altered or repaired in any way.
To obtain warranty service, purchaser must present original bill of sale. Compenents repaired or
replaced throught the remainder of the original warranty period only. The defective
compenents will be repaired or replaced without charge, subject to the terms and conditions
described above.
For help with assembly, Identifying parts, product information
or to order parts, please contact us :
Call us at :
718-456-0505
Monday-Friday
9.00 a.m-5.00 p.m
Visit our website :
www.hodedah.com

HODEDAH
4
Breakdown Structure
3
1
2
A
A
A
A
A
AA
A
A
A
A
A2
2
4
5
5
6
6
7
7
7
8
8
B
BB
B
B
B

HODEDAH
5
Parts
Hardware
1Head Post Foot Post Head Board Foot Board
Center Rail Side Support
Legs
Center
Support Legs
Bed Sheet
2 3 4
5 6 7 8
AM6 x 20mm Jcbb Screw x 8 Pcs BM6 X 65mm Jcbc Screw X 8 Pcs
C M6 Hex Nuts x 4 Pcs DM4 Allen Key x 1 Pc
2 un. 2 un. 1 un. 1 un.
2 un.4 un.2 un.2 un.

HODEDAH
7
HARDWARE REQUIRED
4*A 1*D
HARDWARE REQUIRED
4*A 1*D
Step 3
Step 4
Connect # 2 Foot Post to 4 Footboard using letter A screws from the inner FB to post using
D Allen Key.
Take # 8 Bed Sheet. Align it to 2 Post using A Screw and D Allen Key.
D
A
A
A
A
4
2
8
A
A
D

HODEDAH
6
Step 1
HARDWARE REQUIRED
4*A 1*D
HARDWARE REQUIRED
4*A 1*D
Step 2
Connect # 3 HB to # 1 Head Post by using letter A screws from inner Head Board to connect
to 1 Post using D Allen Key.
Take # 8 and align it to Head Post # 1 using A screws and D Allen Key.
D
A
A
A
A
8
A
A

HODEDAH
8
HARDWARE REQUIRED
4*B 1*D
HARDWARE REQUIRED
4*B 1*D
5
4*C
D
Step 5
Step 6
Take the Center Rail 5 insert under the 8 Bed Sheet then using the Qty of 4 Support legs 7
using Screw B and Allen Key D .
Take the Side Support Legs 6 . Place it on the Side of Bed Sheets 8 . Insert B Screws from
top of Bed Sheet using D AllenKey and inrock C Nuts on the bottom.
C
C
B
6
B
BB
B
D
7
77
5
5
B
6

HODEDAH
9
Step 7
. Tighten all bolts with allen key (D) after making sure they are in the right position.
Job Complete !
In the interest of our environment please disposeof all packaging thoughrfully.