Hodedah HI1115-F User manual

HODEDAH ®
ITEM # HI1115-F
STORAGE CABINET
Assembly Instructions
This instruction booklet contains important safety information, please read abd keep for future reference.
1 person
60 mins
1 YR LTD
1 Box
FRONT VIEW BACK VIEW
Product Dimensions: Height 38.58" x Width 31.73" x Depth 15.75"
Weight Capacity per shelf : 85 lbs
1Page
www.Hodedah.com

HODEDAH ®
Qusetions, need parts, we are here to help!
Phone Email Website
Mon - Fri l 9:30 am to 5pm EST
1 - 855 - HODEDAH
1 - 855 - 463 - 3324
Send us an email
[email protected]
Visit our website to open a case
www.Hodedah.com
FOR PROMPT, RELIABLE SERVICE PLEASE HAVE YOUR INSTRUCTION MANUAL READY
DO NOT RETURN PRODUCT TO THE STORE
If parts are missing or damaged please contact our customer service team and we will
glady ship tour replacement parts FREE of charge within ONE YEAR of purchase!
WARRANTY
Hodedah warrants this product to be free from defects in material and workmanship and agrees to remedy any
such defect. This warranty covers one year from the date of original purchase. This is solely limited to
replacement of defective parts and no assembly for labor is included. This warranty does not apply to any product
that has been improperly assembled, subjected to misuse, abuse or which has been altered or repaired in any
way. To obtain warranty service, original purchaser must present the following; original bill of sale, date of
purchase, where the product was purchased and images if applicable. Components replaced warranted through
the reminder of the original warranty only. The defective part will be replaced without charge, subject to the terms
and conditions described above.
WARNING
This product contains small parts, keep away from children.
This product contains plastic bags, keep away from children.
Serious or fatal crushing injuries can occur from furniture tip-over. To help
prevent this, place heaviest items on the lower shelves and drawers. Do not set
heavy objects on top shelves and drawers.
Never allow children to climb or hang on drawers, shelves and doors.
Never open more than one drawer at a time.
The use of tip-over restraints may reduce but not eliminate the risk of tip-over.
2Page
www.Hodedah.com

HODEDAH ®
Let's get started...
Helpful hints, read before beginning assembly
Make sure you receive all boxes.If your item is packed in one box, box count will read 1
of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second
box will read 2 of 2.
Read each step carefully. It is very important that each step is performed in the correct
order. If these steps are not followed in sequence, assembly difficulties will occur.
Work in a spacious level area, preferably carpet, near the place the unit will be used.
DO NO USE power tools to assemble your furniture, it will strip and damage parts.
Your package should include the following hardware and parts. Parts are labeled or
stamped on the raw edge. Please inspect content to ensure you have received all
components. If you are missing any hardware or parts please contact customer
service right away before assembly.
Assembly Tools Required (not supplied)
Product Care and Maintenance
Wipe clean with dry soft cloth, never use chemicals or cleaning products they will
damage the finish.
Avoid placing your furniture in direct sunlight, as sunlight cause fading.
Never push, drag or pull your furniture, to move to a new location carefully with two or
more people carry the unit to its new location.
Avoid extreme changes in temperature by arranging furniture away from radiators, heat
and air vents and air conditioning units.
3Page
www.Hodedah.com
Hammer Phillips Screwdriver Tape Measure No Power Tools Needed

HODEDAH ®
1. Before you throw the package, please use the Check Box to identify the parta and hardware to
ensure that you have everything you need.
2. Check and measure the bolts before applying them to parts.
3. Do not completely tighten all hardware until the entire assembly is complete, unless indicated
otherwise.
Important
4Page
www.Hodedah.com
Hardware List
Screw
m3.5 x 14mm
A2
Screw
m3.5 x 16mm
A3
QTY QTY QTY
29 Screw
m3.5 x 22mm
A5
48
Crosshead Screw
m6.3 x 40mm
A17
24 Square Lock Set
C5
1Square Lock
L Bracket
C8
1
Wood Dowel
6 x 25mm
D4
24 Door Holder
E3
8Anti-Tipping Kit
E21
2
Handle
96mm (Silver)
H3
4Magnet Catch KD
K1
3Leg Pin
L1
5
Allen Key
N1
1Nail 6/8
N3 30
(+-3) Hanging Steel Pipe
391mm x 18mm
P
1
L Bracket
R1
2Crosshead Cover
Y
18

HODEDAH ®
1QTY 2QTY
11
3QTY
1
45
11
6
2
78
11
9
2
10 11
11
12
2
13
1
Part List
5Page
www.Hodedah.com

HODEDAH ®
The Breakdown
1
2
3
4
5
6
6
7
8
9
9
10
11
12
12
13
6Page
www.Hodedah.com

HODEDAH ®
Step 1
D4 Wood Dowel 6 x 25mm 4
D4
D4
D4
D4
D4
3
-Insert the Wood Dowel 6 x 25mm (D4) into panel no. 3.
7Page
www.Hodedah.com
Step 2
D4 Wood Dowel 6 x 25mm 4
-Insert the Wood Dowel 6 x 25mm (D4) into panel no. 4.
D4
D4
D4
D4
D4
4

HODEDAH ®
5
D4
D4
D4
D4 D4
Step 3
D4 Wood Dowel 6 x 25mm 4
-Insert the Wood Dowel 6 x 25mm (D4) into panel no. 5.
-Insert the Wood Dowel 6 x 25mm (D4) into panels no. 6.
D4
Step 4
D4 Wood Dowel 6 x 25mm 8
6
6
D4
D4
D4
D4
D4
D4
D4
D4
8Page
www.Hodedah.com

HODEDAH ®
Step 5
D4 Wood Dowel 6 x 25mm 2
D4
-Insert the Wood Dowel 6 x 25mm (D4) into panel no. 10.
-Insert the Wood Dowel 6 x 25mm (D4) into panel no. 11.
Step 6
D4 Wood Dowel 6 x 25mm 2
9Page
www.Hodedah.com
D4
D4
D4
D4
10
11
D4

HODEDAH ®
Step 7
-Attach the panel no. 3to panels no. 6.
-Use Allen Key (N1) to tighten the Crosshead Screw m6.3 x 40mm (A17).
Step 8
10 Page
www.Hodedah.com
6
6
3
A17
N1
A17 Crosshead Screw m6.3 x 40mm 4
N1 Allen Key 1
A17
A17
A17
-Attach the panel no. 4 &5 to panels no. 3.
-Use Allen Key (N1) to tighten the Crosshead Screw m6.3 x 40mm (A17).
-Button the Crosshead Screw m6.3 x 40mm (A17) by using Crosshead Cover (Y) except at
panel no. 5.
A17 Crosshead Screw m6.3 x 40mm 4
N1 Allen Key 1
YCrosshead Cover 2
A17
N1
A17
Y
A17
A17
A17
Y
4
5
3
6
6

HODEDAH ®
Step 9
-Insert a Hanging Steel Pipe (P) between large marking holes at panel no. 1& 3.
-Attach panel no. 1, 2,10 &11 to the unit.
-Use Allen Key (N1) to tighten the Crosshead Screw m6.3 x 40mm (A17).
-Button the Crosshead Screw m6.3 x 40mm (A17) by using Crosshead Cover (Y).
Step 10
11 Page
www.Hodedah.com
A17 Crosshead Screw m6.3 x 40mm 16
N1 Allen Key 1
-Attach the panel no. 12 & 13 with secure by Nail (N3).
N3 Nail 30 (+-3)
A17
N1
Y
PHanging Steel Pipe 391 x 18mm 1
A17
A17
A17
A17
A17
A17
Y
Y
Y
Y
Y
Y
P
YCrosshead Cover 16
N3
Hit Softly
N3
N3
N3
N3
N3
N3
N3
N3
N3
N3
N3
12
12
13
1
2
10
11
3

HODEDAH ®
Step 11
-Nail a Leg Pin (L1) at bottom of panel no. 1, 2 &10 .
-Use Screw m3.5 x 14mm (A2) to assemble the L Bracket (R1) between panel no. 5& 10
and 5& 11.
Step 12
12 Page
www.Hodedah.com
-Insert 8 x Door Holder (E3) to panel no. 4, 5& 6.
-Fix panel no. 7, 8, 9to Door Holder (E3) with Screw m3.5 x 14mm (A2).
A2 Screw m3.5 x 14mm 16
E3 Door Holder 8
5 pcs
L1
Hit Softly
L1
L1
L1 L1
L1
R1
A2
A2
R1
1
10
11
A2 Screw m3.5 x 14mm 8
R1 L Bracket 2
L1 Leg Pin 5
A2
E3
E3
E3
E3
E3
E3
78
9
9
1
2
4
10
5
6
6

HODEDAH ®
Step 13
-Insert the Magnet Catch KD (K1) at panel no. 4& 6.
-Use Screw m3.5 x 14mm (A2) to assemble Magnet Plate (K1) at panel no. 7, 8& 9.
Step 14
13 Page
www.Hodedah.com
-Use Screw m3.5 x 22mm (A5) to attach the Handle 96mm (H3)
to panel no. 7, 8& 9.
-Use Screw m3.5 x 14mm (A2) to attach the Square Lock L Bracket (C8) at panel no. 4.
-Use Screw m3.5 x 16mm (A3) to attach the Square Lock Set (C5) at panel no. 8.
C5 Square Lock Set 1
C8
Square Lock L Bracket 1
H3 Handle 96mm (Silver) 4
A2 Screw m3.5 x 14mm 3
K1 Magnet Catch KD 3
K1
K1
K1
K1
K1 A2
78
9
9
K1
K1
K1
K1
4
A5 Screw m3.5 x 22mm 8
C5
A3
C8
A2
H3
A5
A2 Screw m3.5 x 14mm 2
A3 Screw m3.5 x 16mm 4
H3 C5
H3
H3
H3
C8
Final step
78
9
9
4

HODEDAH ®
FITTING OF ANTI-TIP SAFETY STRAP
STEP 1:
- Attach the mounting bracket (a) to the furniture in the
solid part below the top panel a few inches away from the
side of the unit.
- Screw (b) through the smallest hole of (a).
ab
STEP 2:
- Locate a stud in the wall
behind the unit, does not
have to be centered
- Place the other mounting
bracket (a) on the wall
stud 2 inches below the
mounting bracket
secure to the back of
your unit.
- Attach to the wall stud
using (c) through the
smaller hole of (a).
d
ca
STEP 3:
- Repeat the same step a few inches away from the
other side of the unit.
- Place the furniture into position so both mounting
brackets are vertically in line.
- Lace the end of the restraint strap through the
larger holes in each mounting bracket.
- Secure the strapsand lock into place.
FURNITURE
WALL
BACK SIDE OF
TOP PANEL
Mounting bracket
4 Pcs
abRestraint strap
2 Pcs
d
14 Page
www.Hodedah.com
Screw m8 x 18mm
2 Pcs cScrew m8 x 50mm
2 Pcs

HODEDAH ®
15 Page
www.Hodedah.com
Job Complete
Enjoy & Thank you for purchasing from Hodedah!