Hodedah HIK 65-MOP User manual

1
Hodedah
www.hodedah.com
support @hodedah.com
HIK 65-MOP
L3548" X D1648" X H35"

PART & HARDWARE LIST
2
M1
CAP
902 MAGNET PLATE
902 MAGNET
Hodedah
www.hodedah.com
support @hodedah.com
APLASTIC DOWEL M8 X 25MM 26
B CB SCREW M3 X 12MM 2
H
I
J1
CSK CAP M6 X 40MM 16
J2
POWER NAIL 6/8
4
K
PVC SHELF SUPPORT 4
DOOR SUPPORT SPRING
2
O
HANDLE SV 48 (SILVER)
40
P/H SCREW M4 X 24MM
N
2+2
14
4
2
2
O1
O2
1
K1 K2
CCB SCREW M3.5 X 12MM 12
D CB SCREW M3.5 X 16MM 16
E CB SCREW M4 X 25MM 2
F CB SCREW M4 X 35MM 8
G
2
MINIFIX 5654 4
P/H SCREW M4 X 40MM
DRAWER SLIDE 14"
P1 2
PLATE CASTER WITHOUT LOCK
P2 2
PLATE CASTER WITH LOCK
Q1
ALLEN KEY
4ALUMINIUM PIPE (384MM)
R
L
M2
M3
2
4
3
3
5
6
7
8
9
10 11
10
12
13 14
15
16 16

3
- This product contains small components, please ensure that they are
kept away from small children.
- THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE
REFERENCE.
STOP
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, email our customer
service. We will gladly ship your replacement parts
FREE of charge.
email us at
[email protected]
For prompt, reliable service; please have your
assembly manual ready.
Need Parts or Assistance?
Hodedah
www.hodedah.com
support @hodedah.com

4
Thank you for purchasing from Hodedah
To learn more about hodedah and our products visit
www.hodedah.com
READ BEFORE BEGINNING ASSEMBLY
- Read each step carefully. It is very important that each step of instruction is performed in the
correct order. If these steps are not followed in sequence, assembly difficulties will occur.
- Make sure all parts are included. Most parts are labeled or stamped on the raw edge.
- Work in spacious area, preferably on a carpet, near the place the unit will be used.
- Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
HELPFUL HINTS
- Call us if you need assistance.
- Move your new furniture carefully, with two people lift and carry the unit to it's new location.
- Never push, drag or pull your furniture (especially on carpet).
Warranty Information
Hodedah warrants this product to be free from defects in material and workmanship agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is
solely limited to be repair or replacement of defective parts and no assembly labor is included.
This warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way.
To obtain warranty, purchaser must present original bill of sale. Components repaired or
replaced warranted through the remainder of the original warranty period only. The defective
components will be repaired or replaced without charge, subject to the terms and conditions
described above.
For help with assembly, identifying parts, product information or to
order parts, please contact us :
Call us at :
718-456-0505
Monday - Friday
9:00am - 5:00pm
Visit our website :
www.hodedah.com
Hodedah
www.hodedah.com
support @hodedah.com

MINIFIX 5654
H4
K2 4
STEP 1
APLASTIC DOWEL M8 X 25MM 26
5
Hodedah
www.hodedah.com
support @hodedah.com
- Insert 26 x Plastic dowel (A) into Panels (1), (2) (3), (4), (5) & (6) using a plastic hammer.
- Insert 4 x Minifix 5654 (K2) into the bottom of Panel (8) using a Philips head screwdriver.
- Insert 4 x Pvc shelf support (H) into panels (1) & (5) by push with thumb.
BOTTOM VIEW LEFT VIEW RIGHT VIEW
H
PVC SHELF SUPPORT
5 1
2
4
3
3
6
5 1
A
K2
8

STEP 2
6
Hodedah
www.hodedah.com
support @hodedah.com
- Assemble 2 x Drawer slide (O1) to Panel (1) & (5) with 6 x CB Screw M3.5 x 12m (C) using Philips head
screwdriver.
- Insert 4 x Door support spring (I) into Panel (13) & (14) by push with thumb.
- Attach 2 x Handle SV 48 (M1) to Panel (13) & (14) front with 2 x P/H Screw M4 x 24mm (M2) using a
Philips head screwdriver.
- Fix 2 x Magnet plate (J1) to Panel (13) & (14) back with 2 x CB Screw M3 x 12mm (B) using a Philips
head screwdriver.
2
C
902 MAGNET PLATE 2
B
DOOR SUPPORT SPRING 4
HANDLE SV 48 (SILVER)
P/H SCREW M4 X 24MM 2
M1
LEFT VIEW RIGHT VIEW FRONT VIEW
BACK (LEFT VIEW) BACK (RIGHT VIEW)
6
CB SCREW M3 X 12MM 2
CB SCREW M3.5 X 12MM
I
J1
M2
DRAWER SLIDE 14" 2
O1
O1
C
15
I
13
14
M1
M2
13 14
J1
B

STEP 3
7
Hodedah
www.hodedah.com
support @hodedah.com
L9
J2 2
G CSK CAP M6 X 40MM 9
902 MAGNET RALUMINIUM PIPE (384MM) 4
BOTTOM VIEW
- Insert 2 x Magnet (J2) to Panel (6) base by using a plastic hammer (Knock gently).
- Attach Panel (2) into Panel (1). Insert 2 x Csk Cap M6 x 40 (G), tighten with Allen key (Q) & insert Cap (L).
- Attach Panel (3) into Panel (2). Insert 2 x Csk Cap M6 x 40 (G), tighten with Allen key (Q) & insert Cap (L).
- Slot 4 x Alluminium pipe (R) into Panel (2).
- Attach Panel (4) and insert 4 x Csk Cap M6 x 40mm (G), tighten with Allen key (Q) & insert Cap (L).
- Attach Panel (6) to Panel (5) & insert 1 x Csk Cap M6 x 40mm (G), tighten with Allen key (Q) & insert Cap (L).
Q1ALLEN KEY
CAP
6
J2
J2 L
QG
1
2
L
QGL QG
1
2
3
R
R
L
Q
G4
6
5

D
P1
D
P2
2
PLATE CASTER WITHOUT LOCK
2
PLATE CASTER WITH LOCK
P1
P2
STEP 4
8
Hodedah
www.hodedah.com
support @hodedah.com
L1
G7
D
CSK CAP M6 X 40MM
16
- Attach Panel (6) to Panel (1). Insert 1 x CSK Cap M6 x 40mm (G) & Cap (L) by using Allen key (Q).
- Attach Panel (7) to Panel (5) & (1) with 6 x CSK Cap M6 x 40mm (G), tighten with Allen key (Q) & insert Cap (L).
- Fix 2 x Plate caster without lock (P1) & Plate caster with lock (P2) into Panel (7) base.
Use 16 x Csk M3.5 x 16mm (D) & tighten using Phillips Head screwdriver.
Q1
ALLEN KEY
CAP
CB SCREW M3.5 X 16MM
Q
GL
6
1QG
7
7
5

STEP 5
9
Hodedah
www.hodedah.com
support @hodedah.com
K1
4
F
MINIFIX 5654 4
E
8
CAP
L
CB Screw M4 X 25MM 2
- Attach panel (8) to panels (1) & (5), insert 4 x Minifix (K1), tighten with Allen key (Q) & insert Cap (L).
- Insert 2 x CB Screw M4 x 25mm (E) to Panel (9) back using a Philips head screwdriver.
- Attach 2 x Panel (10) to Panel (9). Then attach Panel (11) to Panel (10) using CB screw M4 x 35mm (F)
using Phillips head screwdriver.
- Fix 2 x Handle (M1) to Panel (9) front. Insert 2 x P/H Screw M4 x 40mm (M3) & tigthen with Phillips head
screwdriver.
CB Screw M4 X 35MM
K1
2
HANDLE SV 48 (SILVER)
M1
2
M3 P/H SCREW M4X40
L
K1
Q
Q1
ALLEN KEY
8
9
E
9
10 11
10
1
5

STEP 6
Hodedah
www.hodedah.com
support @hodedah.com
RIGHT LEFT
- Fix 2 x Drawer slide 14" (O2) into both Panel (10) using CB Screw M3.5 x 12mm (C) & tighten with
Philip head screwdriver.
- Slot 1 x Panel (12) into Panel (10) groove & use 15 x Power nail (N) for fix it. Knock by using a hammer.
- Place the 2 x Panel (16) at the back of finish good. Use 25 x Power nail (N) for fix it. Knock with a hammer
- Slide the drawer box into the drawer slide at the Panel (1) & (5).
- Slide 1 x Panel (15) between Panel (1) & Panel (5).
C6 CB SCREW M3.5 X 12MM DRAWER SLIDE 14" 2
O2
N40
POWER NAIL 68"
O2
C
C
O2
N
N
16
16
15
10
10
12

TOP
BOTTOM
STEP 7
11
Hodedah
www.hodedah.com
support @hodedah.com
Job Complete !
In the interest of our environment please dispose of all packaging throughtfully.
- Press & insert the Door support spring (I) at the panel (13) & (14) top into the hole at bottom of Panel (6).
- Press the Door support spring (I) at the panel (13) & (14) base & insert into the hole at panel (7).
13
13 & 14
13 & 14
6
I
I
614