Home Accents Holiday TY230-1614-1 User manual

USEAND CARE GUIDE
58in 180 Light LED Carriage +
43in 120 Light LED Horse
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase
of this 58in 180 Light LED Carriage + 43in 120 Light LED Horse. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you for choosing Home Accents!
Guarantee
What is Covered
The product is intend for residential seasonal use for approximately 90 days per year. This product
is covered by a 90 days limited guarantee due to defects in material and workmanship. Return the
product with purchase receipts to the location of purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS, batteries,
products that have been subjected to unauthorized repair and/or modification and damage caused
by shipping and improper handling, alterations, misuse or accidents. Questions, problems, missing
parts? Before returning to the store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
SKU # 760 299
Model # TY230-1614-1
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box, and place them on a flat surface. Read
the entire manual prior to assembly, and identify all the parts included in the package
against the parts list. If any parts are missing or damaged, do not attempt assembly,
Contact our customer service center or return to place of purchase with proof of
purchase receipt. Assembly of this product may require more than one person.
PACKAGE CONTENTS
Package Contents/Parts List
Part Description Quantity
A Head/Neck 1
B Collar 1
C Mane 1
D Body 1
E Tail 1
F Front Leg 2
G Hind Leg 2
H Roof 1
I Carriage Body Panel R 1
J Right Side Body Panel Trim 1
Package Contents/Parts List
Part Description Quantity
K Carriage Body Panel L 1
L Decorative Topper 1
M Wheels 4
N Support Base 1
O Horizontal Stabilizing Bar 2
P Ground Stake 8
Q Plastic Tie 20
R Spare Fuse 3
S Spare Bulb 10
A
C B H
I
J
K
L
M O
P
Q
R
S
D
E
F GN

Assembly
Assembling the Horse
Step 1. Insert the metal connecting rods attached to the Front Legs and Hind Legs (F&G) into the matching
holes on the underside of the Body (D).The Legs come with metal bars pre-attached to stabilize the
Horse. Insert the hooked end of the metal bars into the metal nut on the opposite Leg.(FIG.1)
Step 2. Insert the Head/Neck (A) into the matching holes at the front of the Body (D).Then insert the
Mane (C) into the matching holes of Head (A).(FIG.2)
Step 3.Insert the rod of Tail (E) into the rear of the Body(D),and fasten them with Plastic Ties(Q).(FIG.3)
Step 4.Wrap the Collar (B) around the neck of Horse and connect the velcro fastener. The and
secure the Horse to the ground with the Ground Stakes (P). (FIG.4)
Assembling the Carriage
Step 5. Align the Right Side Body Panel Trim (J) with the Carriage Body Panel(I) then insert two into the
matching holes connecting rods on (J) into the connecting holes on the bottom of (I). (FIG.5)
Step 6. Align the Carriage Body Panel R (I) and the Carriage Body Panel L (K) with each other then
insert the connecting rods on one half into the connecting holes on the other half Insert the
vertical rod of the Support Base (N) into the Base Holder Hole on the underside of the
Carriage Body Panels and lock together. (FIG.6)
Step 7. Insert the connecting rods on both ends of the Roof (H) into the matching connecting holes
in the top of the Carriage Body Panels. Fasten them together at the overlapped metal rings
with Plastic Ties (Q). (FIG.7)
Step 8. Insert the connecting rods of each Wheel (M) into the matching holes on the underside of
the Carriage Body.(FIG.8)
Step 9. Hook each of Horizontal Stabilizing Bars (O) into the matching holes on the inside of the
Wheels. Secure the Wheels to each other with the Plastic Ties (Q). (FIG.9)
Step 10. Insert the rods of Decorative Topper (L) into the matching holes on top of the roof of the
Carriage. (FIG.10)
Step 11. Secure the Carriage to the ground with the Ground Stakes (P). (FIG.11)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 25.2 Watts
(0.21 Amps) for Horse and rated at 30 Watts (0.25 Amps) for Carriage. Do not
connect to another lighting string, decorative outfit or other electrical product. Before
you use or re-use this product inspect it carefully. Return to place of purchase with
purchase receipt if the product has cuts, damage, frayed wire insulation on cords,
cracks in the socket enclosures, loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1 FIG.2
FIG.4
FIG.10
FIG.11
FIG.6
FIG.7
FIG.5
FIG.8
FIG.3
FIG.9