Home Styles 20 05230 0050 User manual

Hardware List
Part List
20 05230 0050
IMPORTANT
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Chair
B.
Back
1 pc.
C.
Foot
4 pcs.
A.
Seat
1 pc.
Hex Wrench
1 pc.
M8x30
Head Cap Bolt
12 pcs. (+1 extra)
2157A 1P

Assembly Instructions 2/2
Figure 1
Figure 2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Open zipper at bottom of Seat (A), remove Feet (C),
then close zipper. (See Figure 1)
Attach Feet (C) to Seat (A) with Head Cap Bolts.
(See Figure 2)
C
C
A
C
C
STEP 2
Turn unit to its’ upright position.
Attach Back (B) to unit..
B
Head Cap Bolt
Zipper

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Sofa
20 05230 00LS
E.
Seat
1 pc.
F.
Back
1 pc.
Hex Wrench
1 pc.
M8x30
Head Cap Bolt
11 pcs. (+1 extra)
For assembly see instructions in carton 20 05230 00RS.
C.
Foot
3 pcs.
D.
Foot
1 pc.
2157A 1.5PL

Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Carton 20 05230 00LS is also needed for assembly.
A.
Seat
1 pc.
B.
Back
1 pc.
Sofa
20 05230 00RS
Hardware List
Part List
Hex Wrench
1 pc.
M8x30
Head Cap Bolt
11 pcs. (+1 extra)
2157A 1.5PR
C.
Foot
3 pcs.
D.
Foot
1 pc.

Assembly Instructions 2/3
Figure 1
Figure 2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Open zipper at bottom of Seat (A), remove Feet (C) and (D),
then close zipper. (See Figure 1)
Attach Feet (C) and (D) to Seat (A) with Head Cap Bolts.
(See Figures 2 and 3)
Figure 3
C
C
C
A
STEP 2
Turn unit to its’ upright position.
Attach Back (B) to unit.
B
Head Cap Bolt
D
Zipper

Assembly Instructions 3/3
STEP 3
Open zipper at bottom of Seat (E),
remove Feet (C) and (D), then close zipper.
Attach Feet (C) and (D) to Seat (E) with
Head Cap Bolts.
C
C
C
STEP 4
Turn unit to its’ upright position.
Attach Back (F) to unit.
Head Cap Bolt
D
Figure 4
STEP 5
Attach left seat to right seat.
(See Figure 4)
E
Zipper
F

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319

Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Chaise
20 05230 61LB
E.
Back
1 pc.
For assembly see instructions in carton 20 05230 61RS.
2157A 2PLY

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Chaise
20 05230 61LS
D.
Seat
1 pc.
Hex Wrench
1 pc.
M8x30
Head Cap Bolt
12 pcs. (+1 extra)
For assembly see instructions in carton 20 05230 61RS.
C.
Foot
4 pcs.
2157A 2PLX