Home Styles Arts & Crafts Dining Buffet User manual

Buffet Unit Part List
88 5180 691
Dining Buffet
Arts & Crafts
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
Hardware List
Hex Wrench
1 pc.
Head Cap Bolt
28 pcs. (+1 extra)
Cam Lock
8 pcs.(+1 extra)
Cam Lock Screw
8 pcs.(+1 extra)
Machine Screw
8 pcs.
A.
Top
1 pc.
Wood Screw
24 pcs. (+1 extra)
Wood Screw (long)
16 pcs. (+1 extra)
Drawer
Pull Handle
2 pcs.
Adjustable Pin
16 pcs. (+2 extra)
N.
Base
1 pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
For assembly see instructions in carton 88 5180 692
Wood Screw
for Megnet
8 pcs. (+1 extra)
Magnet
4 pcs.
M.
Rack
1 pc.
O.
Leg
2 pcs.
P.
Leg
1 pc.
L.
Shelf
4 pcs.
Small
Hex Wrench
1 pc.
Door
Pull Handle
2 pcs.
(Cottage Oak)

Part List (in this carton)
Also need the following from carton 88 5180 691 :
B.
Side Panel
1 pc.
E.
Middle Panel
1 pc.
C.
Side Panel
1 pc.
Hardware List in carton 88 5180 691
Cam Lock Screw 9 pcs.
Cam Lock 9 pcs.
Magnet 4 pcs.
Wood Screw for Magnet 9 pcs.
Head Cap Bolt 29 pcs.
Adjustable Pin 18 pcs.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
D.
Middle Panel
1 pc.
Part List in carton 88 5180 691
Top (A)
Shelf (L)
Rack (M)
Base (N)
Leg (O)
Leg (P)
1 pc.
4 pcs.
1 pc.
1 pc.
2 pcs.
1 pcs.
F.
Back Panel
3 pcs.
G.
Back Piece
2 pcs.
K.
Fixed Shelf
1 pc.
J.
Front Piece
1 pc.
Q.
Door
1 pc.
R.
Door
1 pc.
S.
Drawer
2 pcs.
(Knock-Down Construction, please refer to
the last page of these instructions for steps
to complete assembling drawers)
Wood Screw (long)
Wood Screw
17 pcs.
25 pcs.
Hex Wrench 1 pc.
H.
Back Stretcher
2 pcs.
I.
Front Piece
1 pc.
Door Pull Handle 2 pcs.
Drawer Pull Handle 2 pcs.
Hardware List in carton 88 5180 691
Machine Screw 8 pcs.
Small Hex Wrench 1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
88 5180 692
Arts & Crafts
Dining Buffet (Cottage Oak)

IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Assembly Instructions 2/5
Put Cam Lock Screws into the
pre-drilled holes of Side Panel
(B),(C), Middle Panel (D),(E)
and tighten.
Attach 2X Magnets to
Middle Panel (D) and (E) by using
Wood Screws in the pre-drilled holes
(see Figure 1).
Attach Back Stretcher (H) to Side Panel (B) with Cam Lock.
Attach Back Piece (G) to Back Stretcher (H) then slide Back Panel (F) into place.
Attach second Back Stretcher (H) to the unit with Cam Locks.
STEP 2
B
F
F
F
H
H
G
G
Cam Lock
Cam Lock
H
Cam Lock Screw
BC
DE
Magnet
Wood Screw
Magnet
Wood Screw
(Figure 1)

Assembly Instructions 3/5
STEP 3
to the unit with
Head Cap Bolts.
Attach Fixed Shelf (K),
Front Piece (J)
and Middle Panel (E) to the unit,
using Cam Locks and Head Cap Bolts.
Attach Front Piece (I) to the unit.
Attach Side Panel (C) to the unit with Cam Locks.
Attach Middle Panel (D)
STEP 4
Attach Base (N) to the unit
with Head Cap Bolts.
N
Head Cap Bolt
Head Cap Bolt
D
I
J
E
C
Cam Lock
O
P
O
Attach Leg (O) to Base (N) with Head Cap Bolts.
Tighten up Leg (P) in the pre-drilled hole of unit as shown.
STEP 5
K
N

Assembly Instructions 4/5
STEP 6
Attach Rack (M) to Top (A) with
Head Cap Bolts..
STEP 7
Turn the unit back to its
upright position.
Place Top (A) onto the unit
with Head Cap Bolts.
Slide Drawer (S) into place.
Insert Adjustable Pins into both side panels and middle panels at the desired level.
Slide Shelf (L) into place.
Assemble Pull Handles to Door (Q) and (R) with Machine Screws.(see Figure 2)
Attach Door (Q) and (R) to the side panels by sliding the door lift hinges into the side panel
lift hinges. (see Figure 3)
(Figure 3)
A
A
Q
R
S
S
L
L
L
L
Adjustable Pin
Head Cap Bolt Machine Screw
(Figure 2)
M
Head Cap Bolt
Insert Wood Screws from the back
and tighten.
STEP 8 Wood Screw

Assembly Instructions 5/5
Figure 1
Figure 2
MAKE SURE ROLLER
IS ON THE BACK
S2
S2
S2
S3
S3
S3
S4
S4
S4
S5
S5
S1
S1
S1
Drawer (S)
Part List
S1.
Front Part
2 pcs.
S5.
Base Part
2 pcs.
S2.
Back Part
2 pcs.
S3.
Side Part
2 pcs.
S4.
Side Part
2 pcs.
Figure 3
Figure 4
Attach S1 to S3 and S4, using
a Phillips screwdriver and
long wood screws ,
tighten halfway.
Attach S2 to S3 and S4 using
long wood screws (4X),
tighten halfway. (see Figure 1)
(4X)
Insert short wood screws (6X)
into the pre-drilled holes in S5,
tighten screws. (see Figure 3)
Attach hardware pulls with
machine screws.
(see Figure 4)
Slide S5 into the grooves in S3
and S4. Be sure to push S5 all
the way forward to it meets S1.
(see Figure 2)
STEP 1
STEP 2
STEP 3
STEP 4
Tighten all screws used in
drawer assembly.