Home Styles 451 -95 User manual

451 -956
Kitchen Cart
Adjustable Pin
16 pcs. (+1 extra)
M4x22
Machine Screw
8 pcs.
Handle
4 pcs.
M3x16
Wood Screw
for Leaf Support
6 pcs. (+1 extra)
M3x16
Wood Screw
for Magnet
4 pcs. (+1 extra)
M3x25
Wood Screw (long)
24 pcs. (+1 extra)
M3x25
Flat Head Screw
3 pcs. (+1 extra)
M3x16
Wood Screw (short)
2 pcs. (+1 extra)0
Hex Wrench
1 pc.
M6x12
Head Cap Bolt
for Caster
16 pcs. (+1 extra)
M6x25
Head Cap Bolt
4 pcs. (+1 extra)
M6x38
Head Cap Bolt (long)
4 pcs. (+1 extra)
Magnet
2 pcs.
A.
Top
1 pc.
M.
Rack Side
1 pc.
N.
Rack Side
1 pc.
P.
Rack Bar
1 pc.
O.
Rack Base
1 pc.
W.
Base
1 pc. Q.
Shelf
4 pcs.
R.
Door
1 pc.
S.
Door
1 pc.
U.
Leaf
Support
1 pc.
T.
Drawer
2 pcs.
V.
Leaf
Support
1 pc.
J.
Front Rail
1.pc
Refer to later page(s) of these
instructions for drawer assembly.
H.
Back Rail
1 pc.
X.
Front Rail
1 pc.
Caster
2 Locking
2 Non-Locking
4 pcs.
Small
Hex Wrench
1 pc.
Hardware List
Part List
Tool(s) required for assembly: Phillips screwdriver
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
C.
Side Panel
1 pc.
F.
Back Panel
3 pcs.
E.
Middle Panel
1 pc.
G.
Back Upright
2 pcs.
B.
Side Panel
1 pc.
D.
Middle Panel
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
I.
Back Rail
1 pc.
K.
Arm
2 pcs.
L.
Towel Bar
1 pc.

Assembly Instructions 2/8
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 2
Attach unit to Side Panel (C) with Head Cap Bolts.
Head Cap Bolt
STEP 3
Attach Arms (K) to Side Panel (B) with Head Cap Bolts.
Head Cap Bolt
K
C
B
K
STEP 1
Assemble Rack Sides (M), (N), Rack Base (O) and Rack Bar (P).
P
O
N
M

Assembly Instructions 3/8
Lock
Figure 1 Figure 2
STEP 4
Attach Back Rail ( )H
to Side Panel (C),
then flip Locks.
(See Figures 1 and 2)
Attach Back Uprights ( )G
to unit.
Slide Back Panels ( )F
into position.
Attach Back Rail ( )I
to unit, then flip Lock.
Attach Side Panel (B)
to unit, then flip Locks.
Figure 3
STEP 5
Attach Base ( ) to unit withW
Head Cap Bolts (long), then flip Locks.
(See Figure 3)
Note: Arrow label indicates front of Base ( ).W
F
CF
G
F
H
G
B
I
Arrow label at front
WHead Cap Bolt (long)
Lock

Assembly Instructions 4/8
STEP 7
Turn unit over to its upright
position.
Attach Middle Panel (D)
to unit, then flip Locks.
Attach Front Rail (J) and
Middle Panel (E) to unit,
then flip Lock.
Insert Wood Screws (short)
into pre-drilled holes in unit,
then tighten.
Slide Towel Bar (L) into position.
Figure 4
STEP 6
Attach Casters to unit with Head Cap Bolts
for Caster into pre-drilled holes
with Locking Casters at front.
(See Figure 4)
Note: Arrow label indicates front of unit.
Arrow label at front
Head Cap Bolt for Caster
Non-Locking Caster
Locking Caster
Wood Screw (short)
Lock
L
E
J
D

Assembly Instructions 5/8
Figure 5
STEP 8
Attach Leaf Supports (U) and (V) to unit
with Wood Screws for Leaf Support.
(See Figure )5
Wood Screw for Leaf Support
U
V
Wood Screw for Magnet
Magnet
STEP 9
Attach Magnets to Front Rail ( )X
by inserting Wood Screws for Magnet
into pre-drilled holes, then tighten.
(See Figure )6
Figure 6
X

STEP 10
Attach Front Rail (X) to unit, then flip Locks.
Insert Adjustable Pins into side panels and middle panels at desired level.
(See Figure 7)
Place Shelves (Q) into position.
Attach Doors (R) and (S) by sliding door hinges into side panel hinges.
(See Figure 8)
Attach Handles to Doors (R) and (S) with Machine Screws.
(See Figure 9)
Assembly Instructions 6/8
Figure 7 Figure 8 Figure 9
Adjustable Pin
S
Q
Q
Q
Q
Handle
Machine Screw
R
X

Part List
T2.
Drawer Back
2 pcs.
T5.
Drawer Bottom
2 pcs.
T1.
Drawer Front
2 pcs.
T3.
Drawer Side
2 pcs.
T4.
Drawer Side
2 pcs.
STEP 13
Attach with Machine Screws.Handle
Drawer (T)
Wood Screw (short)
Roller at back
Bottom
STEP 11
Attach Drawer Front (T1) and Drawer
Back (T2) to Drawer Side (T3)
with Wood Screws (long).
Attach Drawer Side (T4) to unit
with Wood Screws (long).
Wood Screw (long)
Machine Screw
Handle
STEP 12
Slide Drawer Bottom (T5) into groove.
Attach Drawer Bottom (T5) to unit
with Wood Screws (short).
Assembly Instructions /78
T1
T2
T5
T3
T4

Assembly Instructions 8/8
STEP 14
Attach Top (A) to unit with Flat Head Screws, then flip Locks.
Slide Drawers (T) into position.
T
A
T
Lock
Flat Head Screw

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460