Home Styles 5543 26 User manual

Hardware List
Part List
Tool(s) required for assembly: LevelPhillips screwdriver,
5543 26-
Upholstered Bench
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
A.
Cushion
1 pc.
B.
Top
1 pc.
M4x32
Machine Screw
2 pcs.
Knob
2 pcs.
M3x15
Wood Screw
4 pcs. (+1 extra)
Magnet
2 pcs.
F.
Base
1 pc.
G.
Back Panel
1 pc.
H.
Foot
4 pcs.
I.
Foot
1 pc.
J.
Door
1 pc.
C.
Side Panel
1 pc.
D.
Side Panel
1 pc.
E.
Middle Panel
1 pc.
K.
Door
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

Assembly Instructions 2/4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
The unit must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Attach Side Panels (C) and (D) to Back Panel (G), then flip Locks.
(See Figures 1 and 2)
Lock
C
GD
STEP 2
Attach unit and Middle Panel (E) to Base (F), then flip Locks.
E
F
Lock
C
D
Figure 1 Figure 2

Assembly Instructions 3/4
STEP 4
Place Top (B) upside down on a soft cloth.
Attach Magnets to Top (B) with Wood Screws into pre-drilled holes.
(See Figure 3)
Wood Screw
Magnet
STEP 3
Insert Feet (H) and (I) into pre-drilled holes in unit, then tighten.
B
H
H
H
H
I
Figure 3

Assembly Instructions 4/4
STEP 5
Turn unit from Step 3 to its upright position.
Attach Doors (J) and (K) to unit by sliding door hinges
into side panel hinges. (See Figure 4)
Attach Knobs to Doors (J) and (K) with Machine Screws.
(See Figure 5)
Attach Top (B) to unit, then flip Locks.
J
K
Figure 4 Figure 5
Machine Screw
Knob
Lock
A
STEP 6
Level unit by adjusting the
adjustable levelers on bottom of unit.
(See Figure 6)
Note: Unit must be level to work properly.
Place Cushion (A) into position.
Figure 6
B

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460