Home Styles 88 5013 941 User manual

88 5013 941
Kitchen Island
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Part List
IMPORTANT NOTE.
Tools required for assembly : Phillips screwdriver
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
For assembly see instructions in carton 88 5013 943
A.
Top Unit
1 pc.

Tools recommended for assembly : Level
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Part List
IMPORTANT NOTE.
Tools required for assembly : Phillips screwdriver
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
88 5013 942
Kitchen Island
For assembly see instructions in carton 88 5013 943
B.
Leaf Top
1 pc.
D.
Back Upright
1 pc.
C.
Back Stretcher
2 pcs.
E.
Middle Panel
1 pc.
F.
Rail
2 pcs.
G.
Shelf
4 pcs.
H.
Base
1 pc.
N.
Back Panel
2 pcs.
Hex Wrench
1 pc.
Small Wrench
1 pc.
Cam Lock Screw
4 pcs. (+1 extra)
Cam Lock
4 pcs. (+2 extra)
Adjustable Pin
32 pcs. (+1 extra)
M6x35
Head Cap Bolt
18 pcs. (+1 extra)
Knob
4 pcs.
M4x25
Machine Screw
4 pcs.
M3.5x16
Wood Screw
9 pcs. (+1 extra)

Tools recommended for assembly : Level
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Part List
IMPORTANT NOTE.
Tools required for assembly : Phillips screwdriver
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
88 5013 943
Kitchen Island
J.
Leg
1 pc.
I.
Leg
1 pc.
K.
Leg
1 pc.
L.
Leg
1 pc.
M.
Side Panel
2 pcs.
O.
Shelf
4 pcs.
P.
Door
1 pc.
Q.
Door
1 pc.
For assembly also need carton 88 5013 941, 942

K
L
STEP 1
Insert Cam Lock Screws into pre-drilled holes of Legs (K) and (L).
(See Figure 1)
Cam Lock Screw
Figure 1
Figure 2
Cam Lock
STEP 2
Attach Back Stretcher (C) to Leg (K) with Cam Lock.
(See Figure 2)
Attach Back Upright (D) to Back Stretcher (C).
Slide Back Panels (N) into place, then attach
Back Stretcher (C) to unit with Cam Lock.
Attach Leg (L) to unit with Cam Locks.
K
L
N
N
C
D
C
Assembly Instructions 2/5
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.

Assembly Instructions 3/5
EH
Figure 3
STEP 3
Attach unit from Step 2 Middle Panel (E) to Base (H)
with Head Cap Bolts. (See Figure 3)
J
I
M
M
H
Head Cap Bolt
Head Cap Bolt
STEP 4
Attach Legs (I) and (J) to Base (H) with Head Cap Bolts.
Slide Side Panels (M) into position.

Assembly Instructions 4/5
STEP 5
Attach Rail (F) to unit with Head Cap Bolts.
Attach Adjustable Pins into side panels and middle panel at the desired level.
Slide Shelves (G) into place.
Attach Knobs to Doors (P) and (Q) with Machine Screws. (See Figure 4)
Attach Doors (P) and (Q) to side panel by sliding the door lift hinges
into the side panel lift hinges. (See Figure 5)
Figure 4 Figure 5
Machine Screw
Knob
Adjustable Pin
Head Cap Bolt

B
A
Assembly Instructions 5/5
Figure 6 Figure 7
Knob
Wood Screw Machine Screw
Figure 8
To level the unit, adjust the adjustable
levelers on the bottom of unit.
(See Figure 8)
Note : Unit must be level to work properly.
O
OO
O
Adjustable Pin
Head Cap Bolt
A
STEP 6
Attach Top unit (A) to Leaf Top (B)
with Wood Screws. (See Figure 6)
Remove the Drawers in Top Unit (A),
attach Knobs with Machine Screws.
(See Figure 7)
Attach Top Unit (A) onto the
unit with Head Cap Bolts.
Slide Drawers into position.
Insert Adjustable Pins into side panels
at the desired level.
Slide Shelves (O) into place.