Home Styles Storage Island 88 5530 942 User manual

Part List
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools required for assembly: Phillips screwdriver, Level
For assembly see instructions in carton 88 5530 941, 88 5530 943
Hardware List
B.
Bottom
1 pc.
D.
Back Panel
1 pc.
F.
Shelf
6 pcs.
C.
Plinth
2 pcs.
E.
Back Panel
1 pc.
M4x28
Machine Screw
20 pcs.
Cam Lock Screw
40 pcs.(+1 extra)
Cam Lock
40 pcs.(+6 extra)
Flat Washer
6 pcs. (+1 extra)
Adjustable Pin
24 pcs. (+1 extra)
M6x35
Bolt
6 pcs. (+1 extra)
M3.5x16
Wood Screw (short)
for Drawer Bottom
60 pcs. (+1 extra)
88 5530 942
Storage Island
Knob (small)
8 pcs.
Knob (large)
12 pcs.
M3.5x25
Wood Screw (long)
for Drawer Side
80 pcs. (+1 extra)
M3x25
Wood Screw for
Side Panels
4 pcs. (+1 extra)
G.
Front Rail
4 pcs.

Assembly Instructions 2/7
STEP 1
Put Cam Lock Screws into
the pre-drilled holes of Top (A),
Plinths (C), Side Panels (H),(I)
and Middle Panel (J) and tighten.
(see Figure 1)
Cam Lock Screw
C
A
J
H
Cam Lock Screw
Figure 1
Cam Lock Screw
Cam Lock Screw
C
I
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.

Assembly Instructions 3/7
STEP 3
Attach Bottom (D) to unit
with Flat Washers and Bolts.
(see Figure 3)
Flat Washer
Bolt
STEP 2
Attach Back Panels (D) and (E) to
Middle Panel (J) using Cam Locks.
(see Figure 2)
Attach Front Rails (G) to unit.
Figure 3
Cam Lock
G
J
D
D
E
G
G
G
Figure 2

Assembly Instructions 4/7
STEP 5
Attach Side Panels (H) and
(I) to unit with Cam Locks
and Wood Screws for Side
Panels.
K
CSTEP 4
Attach Plinths (C) to unit
with Cam Locks.
Attach Leg Support (K) to unit.
C
H
I
Cam Lock
Cam Lock
Wood Screw
for Side Panels
Wood Screw
for Side Panels

Assembly Instructions 5/7
Figure 4
STEP 6
Attach Top (A) to unit with
Cam Locks.
STEP 7
Insert Adjustable Pins into side panels
and middle panel at desired level, then
place shelves (F) into position.
STEP 8
Slide Drawers (L) and (M) into position.
To level the unit, adjust the adjustable levelers
on the bottom of unit. (see Figure 4)
Note: Unit must be level to
work properly.
Cam Lock
Adjustable Pin
M
MM
A
L
MM
ML
F
LL
F
F
F
F
F

(Figure 3)
STEP 3
Insert wood screws (6X)short
into the pre-drilled holes in L5,
tighten screws. (See Figure 3)
STEP 4
Attach Knobs (small)
with machine screws.
(See Figure 4)
STEP 2
Slide L5 into the grooves in L3
and L4. Be sure to push L5 all
the way forward so it meets L1.
(See Figure 2)
Tighten all screws used in drawer assembly.
(Figure 1)
(Figure 2)
MAKE SURE ROLLER
IS ON THE BACK
L2
L3
L4
L5
L1
Drawer L
Part List
(Figure 4)
STEP1
Attach L1 to L3 and L4, using
a andPhillips screwdriver
wood screws (4X),long
tighten halfway.
Attach L2 to L3 and L4 using
wood screws (4X),long
tighten halfway. (See Figure 1)
L3
L4
L1
L2
L1
L3
L4
L5
L2
L1.
Drawer Front
4 pcs.
L5.
Drawer Bottom
4 pcs.
L2.
Drawer Back
4 pcs.
L3.
Drawer Side
4 pcs.
L4.
Drawer Side
4 pcs.
Assembly Instructions 6/7

(Figure 3)
STEP 3
Insert wood screws (6X)short
into the pre-drilled holes in M5,
tighten screws. (See Figure 3)
STEP 4
Attach Knobs (large)
with machine screws.
(See Figure 4)
STEP 2
Slide M5 into the grooves in M3
and M4. Be sure to push M5 all
the way forward so it meets M1.
(See Figure 2)
Tighten all screws used in drawer assembly.
(Figure 1)
(Figure 2)
MAKE SURE ROLLER
IS ON THE BACK
M2
M3
M4
M5
M1
Drawer M
Part List
(Figure 4)
STEP1
Attach M1 to M3 and M4, using
a andPhillips screwdriver
wood screws (4X),long
tighten halfway.
Attach M2 to M3 and M4 using
wood screws (4X),long
tighten halfway. (See Figure 1)
M3
M4
M1
M2
M1
M3
M4
M5
M2
M1.
Drawer Front
6 pcs.
M5.
Drawer Bottom
6 pcs.
M2.
Drawer Back
6 pcs.
M3.
Drawer Side
6 pcs.
M4.
Drawer Side
6 pcs.
Assembly Instructions 7/7