Home Styles 88 5133 22 User manual

88 5133 22
Concrete Sheet
Console Table
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Tools recommended for assembly : Level
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
A.
Top
1 pc.
B.
Top Frame
1 pc.
C.
Leg
2 pcs.
D.
Leg
2 pcs.
E.
Stretcher
2 pcs.
F.
Stretcher
1 pc.
Key Wrench
1 pc.
Head Cap Bolt (short)
4 pcs. (+ 1 extra) Head Cap Bolt (long)
4 pcs. (+ 1 extra) Flat Washer
8 pc. (+ 1 extra) Bolt
8 pcs. (+ 1 extra)
Head Cap Bolt
2 pcs. (+ 1 extra) Spring Washer 8 pc. (+ 1 extra) Steel Plate
4 pcs. (+ 1 extra)

Assembly Instructions 2/3
IMPORTANT
* Do not tighten up all the bolts until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
C
C
F
D
D
EE
STEP 1
STEP 2
Attach Legs (C) and (D) to Stretcher (E) with Head Cap Bolts (long).
(See figure 1)
Attach Stretchers (F) to unit with Head Cap Bolts.
Tighten Head Cap Bolts only halfway.
Attach unit to Top Frame (B) with Steel Plates,
Flat Washers, Spring Washers
and Bolts.
(See figure 2)
Steel Plate
Flat Washer
Spring Washer
Bolt
Head Cap Bolt
Head Cap Bolt (long)
Figure 1
Figure 2 B

Assembly Instructions 3/3
A
STEP 3
STEP 4
Attach unit to Top (A) with
Head Cap Bolts (short).
Tighten all Bolts.
Head Cap Bolt (short)
Figure 3
Turn the unit over to its’ upright
position.
To level the unit, adjust the adjustable
levelers on the bottom of unit.
(See figure 3)