Home Styles 88 5053 80 User manual

Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Part List
Tools required for assembly : Level
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
IMPORTANT NOTE
88 5053 80
Chair
E.
Back Frame
1 pc.
D.
Front Frame
1 pc.
A.
Seat
1 pc.
B.
Side Frame
1 pc.
C.
Side Frame
1 pc.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M6x16
Head Cap Bolt
8 pcs. (+1 extra)
Spring Washer
8 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)
M4x16
Wood Screw
4 pcs. (+1 extra)

Assembly Instructions 2/2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten all the Head Cap Bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
* Please make sure unit is level before tightening these screws.
E
Figure 1
STEP 1
Attach Side Frames (B) and (C) to
Back Frame (E) with Flat Washers,
Spring Washer and Head Cap Bolts,
tightening the bolts only half way.
(See Figure 1)
Head Cap Bolt
Spring Washer
Flat Washer
B
STEP 2
Attach Front Frame (D) to unit with
Flat Washers, Spring Washers and
Head Cap Bolts, tightening the bolts only half way.
Tighten all Head Cap Bolts.
STEP 3
Place Seat (A) upside down
on a soft cloth.
Attach unit to Seat (A)
with Wood Screws.
(See Figure 2)
Wood Screw
Figure 2
A
C
D
Head Cap Bolt
Spring Washer
Flat Washer