Home Styles 88 5531 27 User manual

Hardware List
Part List
Tool(s) required for assembly: Phillips screwdriver
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5531 27
Bench
IMPORTANT
A.
Cushion
1 pc.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M3x30
Wood Screw
10 pcs. (+1 extra)
M6x32
Head Cap Bolt
4 pcs. (+1 extra)
Cam Lock
5 pcs. (+2 extra)
Cam Lock Screw
5 pcs. (+1 extra)
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Front Stretcher
1 pc.
E.
Plinth
1 pc.
F.
Back Stretcher
1 pc.
H.
Back Panel
1 pc.
I.
Base
1 pc.
G.
Plinth
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Spring Washer
4 pcs. (+1 extra)
Flat Washer
4 pcs. (+1 extra)

Assembly Instructions 2/3
STEP 1
Insert Cam Lock Screws into pre-drilled
holes of Side Panels (B), (C) and Plinth (E).
(See Figure 1)
STEP 2
Attach Plinth (E) to Base (I)
with Cam Lock. (See Figure 2)
STEP 3
Attach unit from Step 2 and Plinth (G)
to Side Panel (B) with Flat Washers,
Spring Washers, Head Cap Bolts and
Wood Screws. (See Figures 3 and 4)
Figure 3 Figure 4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
Figure 1 Cam Lock
E
I
Cam Lock Screw
B
C
E
Figure 2
Head Cap Bolt
G
Wood Screw
B
Spring Washer
Flat Washer

Assembly Instructions 3/3
STEP 4
Attach Front Stretcher (D) and
Back Stretcher (F) to unit with Cam Locks.
Slide Back Panel (H) into place.
STEP 6
Turn the unit to its’ upright position.
Attach Cushion (A) to unit with Wood Screws.
(See Figure 5)
STEP 5
Attach Side Panel (C) to unit with
Flat Washers, Spring Washers,
Head Cap Bolts, Cam Locks
and Wood Screws.
D
F
H
Cam Lock
A
Wood Screw
Cam Lock
C
Wood Screw
Head Cap Bolt
Spring Washer
Flat Washer
Figure 5

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319