HoMedics PG-IRT1603 User manual
H
~MED
i
cs
·
INFRARED
EAR/FOREHEAD
THERMOMETER
INSTRUCTION
MANUAL
PLEASE
READ
THIS
INSTRUCTION
MANUAL
CAREFULLY
BEFORE
USE
El
manual en Espanol
empreza en la pag,na
21
Model.
PG-IRT1603
P/N
TIE-300-WT
/
TIE-300-BK
Doc:
L-01506,
Rev.
1
lyear
li
mited
warranty
TABLE
OF
CONTENTS
Safety Caution
Items
.....................
..
...........................3
Product
Introduction
..................................................4
Use Cautions
Items
....................................................5
About
Body
Temperature ..........................................6
Product
Layout...........................................................7
Screen Display
Marks
Description
............................8
Battery Installation ....................................................8
Instructions
for
Use ...................................................9
Measurement
Methods
................
..
..........................1o
Cleaning
lnstructions
...............................................
11
Frequently Asked Questions.................................
..
12
Troubleshooting
................
..
.....................................13
Specifications
of
the
Product
................................
..
14
Appendix
...................................................................15
Warranty ...................................................................19
2
SAFETY
CAUTION
ITEMS
• The warning signs and illustrations indicated
in
themanual are
intendedtoenable you tousethe productsafely and correctly
and to preventany harmtoyou and others.
• Warning signs, illustrations, and their meaningsare
as follows.
SYMBOLS
This markindicates instructions that must
be
followed.
& General Warnings.
0 Prohibited
or
not
allowed.
© DONOT disassemble.
[I]
Type BF Applied part.
+Keep dry.
$ Read instruction manual carefully beforeuse.
(e)
The packaging
of
this unitcomplies with the
requirements for environmental protection.
•
Product
material
or
product
itself is
made
of
renewable material
that
may
be
able
to
be
recycled providing benefits
to
the
environment
and
earth.
)t
DO NOTthrowawaywith household waste.
-
IP Classification: IP22
3
&WARNING
• Askprofessional doctors
to
explain the
measured value
of
body
temperature.
• The productis only used for human
body
temperature measurement.
•
DO
NOT usethis productfor purposes other
than
body
temperature measurement.
• DO NOTuse mobile phonesaround this product.
• DO NOTuse equipmentthat generates
electromagneticfields nearthe product.
• DO NOTdisassemble or repairthis device by
yourself, includingchanging device.
• DO NOTbend or stretch thedevice.
• DO NOTimpact
or
drop
this product.
• This unitis only used for human
body
temperature measurementwithout use
of
disease
diagnosis; itcannot
be
used foremergencyand
continuous measurement
in
surgery.
• NOTfor usebychildren. Ifthe children are
in
this
range from zeroto twelve years old, they need
to
use this unitto measure undertheir parents help.
• The patients cannot diagnosethe disease
and gettreatment bythemselves on the base
of
measurementresult, they mustfollowthe
instruction
of
doctors.
• Children under
12
years
of
ageand those
who
cannot express theirthoughts are prohibited
from using them.
• DO NOTusethis producton those who sufferfrom
otitis external, tympanitisand othereardiseases.
0
Thisthermometer may not meet its performance
specifications ifstored
or
used outside these temperature
or
humidity ranges:
Use Environment:
Temperature: from +10°
C-+40
°C (50°
F-104
°
F).
Humidity: from 15%RH-93%RH.
Storage Environment:
Temperature: from -25
-+55°C
(-13
°F-131°
F).
Humidity: from 0%RH-93%RH.
PRODUCT
INTRODUCTION
Intended use: Infrared Ear/Forehead Thermometer intended
to measure human
body
temperature by measuring ear canal
or
forehead.
Scope
of
application: It is suitable for displaying the
body
temperature
of
the measured object by measuring the heat
radiation in the ear canal
or
forehead.
FEATURES
1.
Non-touching
type
infrared
measurement
of
ear/
forehead temperature.
2.
Backlit display: White, Green, Orange, and Red.
4
3.
9 sets of memoryvalues.
4.Switch between Fahrenheit °F and Celsius°C (original
setting is degree Fahrenheit °F).
5.
Instantmeasurements within 1 second.
6.
The design is convenientand economical without disposable
probe covers, which can save subsequent use costs.
7.
It has the function
of
sound on/off.
8.
The machine, if
not
usedfor
30
seconds, will power
off
automatically.
NOTE: Results from this unitshould only
be
used as a
reference. Results are NOTintended to replace medical
advice, consultations,
or
diagnosis by a physician
or
other
medical professional.
CAUTION:
The
measurement results
of
this unit
at
any time only can
be
a reference, it can not replace
the medical diagnosis
of
professional doctor. Ifyou
have any question aboutthe personal temperature
measurement result, please use and diagnose under
the right instructions of doctor.
USE
CAUTIONS
ITEMS
&WARNING
1.
It is very dangerousfor patients to judge and treat on their
own only by measurement results,
so
please
be
sure to
followthe doctor's instructions.
-Self-judgment maylead to aworsening condition
of
patient.
2.Please DO NOTtouch with your hands
or
blow infrared
sensor with your mouth.
-When the infrared sensor is damaged or dirty, it may
cause abnormal measurement results.
3.Ifthere is a temperature difference between the storage
site and the measurement site, please place it
at
room
temperature (measurement site) for about
30
minutes
before next measurement.
-May result in incorrect measurement results.
4.Please keepthis product
out
of
the reach
of
children.
-When thechild sticks to measure
by
himself, his ears may
get hurt. If
he
swallows the battery or thetransparent cover
accidentally, please contactyour doctor immediately.
5.When measuring
body
temperature, please DO NOT
get
closeto air conditioning.
-Avoid affecting the measurementaccuracy.
6.
Before and after useevery time, use a cotton swab dipped
in 75% alcohol
to
wipe the probe surface. (If you see stains,
fog or water onthe infrared sensor glass, please use a
cotton swab dipped in 75% alcohol forwiping the infrared
sensorglassgently.)
-If
you
wipe itwith toilet paper
or
facial tissue, itwill
scratch the infrared sensor resulting in incorrect
measurement result.
-Avoid
cross-infection
of
ear disease and affect the
accuracy
of
the measurement.
7.
The productsuffers mechanical damage.
-There is a possibilitythat the measurement is
not
right.
5
8. The producttouches water or immerses water accidentally,
please fully
dry
before use, especially the water
on
the
surface
of
the sensor should be clean
by
using cotton swab.
-Our aim is
to
avoid causing safety accidents and affecting
measurement accuracy.
CAUTION
1.
Please DO NOT use this productfor people
who
sufferfrom
otitis external, tympanitis and other ear diseases.
-It is possible
to
worsen the affected area.
2. Please DO NOTuse this product after swimming
or
bath or
wet ears.
-It is possible
to
have low measured temperature value.
3. DO NOTplace waste battery
to
dangerzone.
-The battery
may
break.
4.
When measuring the eartemperature
of
the human body,
the productmust
be
operated in the eartemperature mode.
-Result in inaccurate measurement result.
SUGGESTIONS
1.
When
you
tell
the
doctor
measured
body
temperature
value, please tell
the
doctor
that
you measured it with
ear
thermometer
.
2.Please
don't
force
to
impact, fall, trample,
and
shake this
product.
3.
Please
DO
NOTdisassemble, repair and modifythis product.
4.
Please
DO
NOTallow liquid (such as alcohol, water droplets,
hot
water, and so on) to enterthe product
body
because
of
this productwithoutwater resistance.
5.
The product must
be
kept clean in a dry place.
6. Ifyou find any problems, please contact Consumer
Relations, you can
not
repair the product
by
yourself.
7.
DO NOT
use
it
under
the
environment
of
electromagnetic
interference.
8.
Please deal with thewaste and residue
of
this productatthe
end ofthe service life according
to
local laws and regulations.
ABOUT
BODY
TEMPERATURE
THE
COMPARISON
OF
DIFFERENT
MEASUREMENT
METHODS.
Bodytemperature measurementvalues are different
ifwe use different measurement methods. The World
Health Organization (WHO) provides normal human
body
temperature reference values. See table belowabout
the
specific temperature difference.
MEASUREMENT NORMAL BODY
METHODS TEMPERATURE
Rectal temperature 36.6°
C~38
°C (97.88°F~100.4°F)
Oral temperature 35.5°C~37.5°C (95.9°
F~99.5
°
F)
Axillary
temperature 34.7°C~37.3°C {94.46°F~99.14°
F)
Cochleartemperature 35.8°
C~38
°C (96.44°F~100.4°
F)
Oral temperature 35.5°C~37.5°C {95.9°F~99.5°F)
(PG-IRT1603 measured value)
6
THE
CHANGES
IN
HUMAN
BODY
TEMPERATURE
The human
body
temperature constantly changesthroughout
the day, the details are as follows:
AT
NIGHT
Lowest Bodytemperature is at its lowestbecause
of
sleep
and decreasing activity (below
37
°C / 98.6°F
).
IN
THE
MORNING
Higher From warm
bed
to the lower temperature room in
the morning, the whole
body
's muscles
get
contractions
and produce heat.
AT
NOON
HighestAfter lunch, human
body
reaches the highest
temperature and the
body
will adjustnaturally.
THREE
OR FOUR
O'CLOCK
IN
THE
AFTERNOON
Lower Due to physical exertion, blood sugar decreased.
IN
THE
EVENING
Lowest Due to the sun down, room temperature goes down.
PRODUCT
LAYOUT
Probe
Probe cover
for
forehead
temperature
--
Display screen
7
Measurement
button
MEM button
SCREEN
DISPLAY
MARKS
DESCRIPTION
...--
....
Sound symbols
Memory
__
._
M
storage
C]))
(C)--
Power mark
•••••
• •
•••••
• •
• •
•••••
•••••
•••••
• • • •
•••••
•••••
• • • •
• • • •
••••••••••• Measurement
resultdisplay
Objects measurement
Forehead
temperature
measurement
BATTERY
INSTALLATION
1. Press battery cover
to
open. The battery
cover will bounce
automatically.
2. Insert
two
1.5V
AAA
batteries (It is
recommended to use
alkaline batteries). Install
intothe base according
to
correct positive and
negative poles.
To
Remove Battery:
Use
your
finger
to
press
down
hard
on
the end
piece
of
battery"
-" for
ejecting the battery.
Insufficient power
caution:
Ifbattery power
is
low,
LCD
shows "LO" sign and battery
mark is always on, which means, D it's
time to replace the batteries.
8
Cautions
• Ifyou DO NOT use this productfor a long time, take out
battery
to
assure its longevity. The liquid leakage
of
battery
will harm the product; as well as pollute
our
environment.
• It is recommended to use alkaline batteries.
:a
• Batteries are hazardous waste. DO NOT dispose
of
them togetherwith household garbage. ·
• DO NOTdispose
of
batteries in fire. Batteries may
explode
or
leak.
• Recycle
or
dispose
of
properly
in
accordance with local,
state, province, and country regulations.
INSTRUCTIONS
FOR
USE
SOUND FUNCTION: TURN ON/OFF
1.With the device powered on, press mem button to turn the
sound on
or
off
.
2.
Press mem button again, LCD screen will show "(]
>>
" which
meansthe sound is
on
, and a short beep will sound.
3.Press mem button
again"
(]
>>
" will disappear, and means
the sound is off.
CHANGING BETWEEN °F OR °C
While
off
, long press mem button for 6 seconds, it can switch
between Fahrenheit
(°F)
and Celsius (0
C)
degrees. Wait for 8
seconds and the device will turn on automatically
or
press@
button
to
turn
off
the product directly.
MEMORY STORAGE FUNCTION
With the device
off
, press mem button, the productcan read
and save 9 sets
of
measurementvalues in order (as below
picture shows). Itwill turn
off
automatically without operating
for 30seconds
or
press@
button
to
turn
off
this productwith
your hands.
0-
M
(J
»
t··· i
••••
••••
....
:
...
: :
...
: : .: :
........
:
•.....
Q OF
or
BACKLIGHT STATUS INSTRUCTIONS
MEASURED
TEMPERATURE
LIGHT
STATUS
<
34
°CI 93.2°F "LO" with red
backlight
34°C-
37.1
°C / 93.2°F- 98.78°F Green backlight
37.2°C~
38.1
°CI 98.96°
F-100.58
°F Orange backlight
38.2°
C-43.0
°CI 100.76°F~109.4°F Red backlight
>
43
.0°CI 109.4°F "HI" with red
backlight
Caution: This status is for reference only.
9
MEASUREMENT
METHODS
Pleasepull
back
ears
ofyour
child
who
is
within
one year
old.
Please
pull
these
persons'
ears
back
above.
(over
one
year
old
children
and
adults)
Forehead
----------
EAR TEMPERATURE EAR TEMPERATURE FOREHEAD
TEMPERATURE
EAR TEMPERATURE MEASUREMENT
Caution:
Remove the probe cover
of
forehead thermometerto
measure eartemperature.
1.
After removing the probe cover, press the power©
button to turn on the deviceand enter eartemperature
measurement mode. The LCD will initially display the
previous measurementvalue. Place probe into ear and
press the measurement
~
buttonto take the temperature.
2.
The measurementresult will appear after 1 second.
□
(Ji
~
I
•••
, ,
•..•••••.
-~-
c:!
!:::ii
r=
·~
~
~
OF
~
The LCD will flash when Measurementresult.
waiting to start measurement.
NOTE: Ifyou did
not
hearthe beepsound, the temperature
measurement has notyet been completed. DO NOT remove
the thermometer probefrom ear canal until you hearthe
sound. (Ifyou have turned
off
thesound indication, itwill have
no
sound indication.)
FOREHEAD TEMPERATURE MEASUREMENT
Caution:
Install probe cover
of
forehead
thermometer
to
measure
forehead temperature.
1.
After installing probe cover
on
the thermometer, press
the power © button to entertheforehead temperature
measurement mode. The LCD will displaythe previous
measurementvalue. Then aim the forehead thermometer
attheforehea9i
at
a distance
of
O- 5
mm
. Pressthe
measurementWbutton
to
measure temperature.
2.
The measurement result will appearafter 1 second.
The LCD will flash when
waiting to start measurement.
10
Measurement
result.
NOTE: Ifyou did nothearthe beep sound, the temperature
measurement has notyet been completed. DO NOT remove the
thermometer probefrom forehead
at
this time. (Ifyou have
turned offthe sound indication, itwill have
no
sound indication.)
OBJECT PATTERN MEASUREMENT
Caution:
The installation
of
the head cover
of
forehead temperature
does not affect measurement.
1.
Long press @ button to enter the object measurement
modefor 6 seconds, and then aim the thermometer
at
the object, the temperature
of
thetarget objectcan
be
measured directly by pressing
~
button.
2.
After 1 second, you can seethe result
of
the measurement.
()
Ii
~
_.
...
(I
ll••... •
...
i • • • •
...
... ...
·····
........
.
~
--+
...
! :...
:.i
..
.l
/j
OF
/j
OF
The LCD will flash when
waiting to start measurement. Measurement result.
• NOTE: Ifyou did not hearthe beep sound, the temperature
measurement has notyet been completed. DO NOT
remove thermometer probe from target object
at
this time.
(If you have turned
off
the sound indication, itwill
not
have
sound indication.)
• NOTE: Using an
IR
Thermometer
to
Measure the
Temperature
of
Liquids. When using an infrared
thermometer with liquids like soups and sauces,
be
sure to
stirvigorously before taking a measurementto equilibrate
the temperature in the volume
of
liquid and more accurately
approximate the internal temperature
of
the liquid.
CLEANING
INSTRUCTIONS
In
order
to
ensure
the
precise
measurements, it is
recommended
to
clean
the
device
after
each
use.
Dip a cotton swab into 75% alcohol and then use the swab
to
wipethe thermometer probeand remove the residue and dirt.
We recommend you clean the probe for at least 5 seconds.
Clean other components with a soft,
dry
cloth for 10 seconds.
After cleaning, ensure there is no visible dirt
or
residue on the
thermometer. Wait 10 minutes before next measurement.
The device can
be
cleaned a maximum
of
40,000 times.
CAUTION:
IMPORTANT: THE DEVICE NEEDS TO BE CLEANED AFTER
EACH MEASUREMENT. Infrared temperature measurement
is a highly sensitive technique to detectthe temperature.
Any earwax
or
dustaffectthe measurement accuracy, it
could cause a bacterial infection. To ensure properdevice
performance, it is highly recommended
to
perform cleaning
as described above after each use.
11
FREQUENTLY
ASKED
QUESTIONS
SCREEN REASONS SOLUTIONS
DISPLAY
When the targetobject 1. When
the
temperatureis higher measurement
than measurement probeis
not
HI range whichthe ear properly placed in
temperature ismore than the earcanal
or
if
43.0°CI 109.4°F, the LCD the measurement
screen will
show
"
HI
" distance is
too
indication. farduring the
measurement
When the targetobject process, the
temperature islower measurementresult
than measurement may
below.
range whichthe ear 2.
When
temperature is lessthan
measurement
34
I
93
.2 °
F,
the LCD
probe
is
dirty
, the
Lo screen will
show
"Lo"
measurement
indication. value
may
be
low
;
use
a
cotton
swab
dipped
in
75%
alcohol
to
wash
the
measurement
probe
properly
.
This producthas
an
When you operate
upper
limit
of
operating this product,the
temperature of environment
40°C/104°F.When the temperature
Er.H ambienttemperature
be
greaterthan
exceeds this
40
°C/104°F.
temperature point, the
LCD screen will display
an errormessage "Er.H
".
This producthasa When you operate
lowerlimit
of
operating this product, the
temperature
of
environment
10°C/
50
°F.When the temperaturecan
Er.L ambienttemperature
not
be
lowerthan
exceedsthis 10°C/50°
F.
temperature point, the
LCD screenwill display
an errormessage "Er.
L'.
'.
When the environment When itshows "Err",
temperaturechanges place this
product
and
rapidly
about
5 degrees, keep steady in current
Err itwill show " Err " during environment
for
30
measurement in object minutes before next
temperature mode,then measurement.
shutdown automatically.
c:J>>
When theoperation is wrong, ifthesoundisturned on,
then the soundwill read
the
value
and
remind
at
this
moment.
(A
short beepwill
be
heard.)
12
TROUBLESHOOTING
PHENOMENONS
REASONS
SOLUTIONS
Batteriesare Replace the
exhausted. batteries.
When on, and there
is
Ensure
the
nothing displayed
on
The battery batteries
the screen. are inserted
polarityis matching the
incorrect. polarities onthe
batterycase.
The measurement Take
position is
not
measurement
The measurement correct. again.
temperature is low. Clean the sensor,
Sensor
or
ear
canal isdirty. and ear before
measurement.
Temperature The measurement Allow a minimum
fluctuates interval
is
too
of
1oseconds
afterrepeated small. between
measurement. measurements.
13
SPECIFICATIONS
OF
THE
PRODUCT
Product name Infrared Ear/Forehead
Thermometer
Model number PG-IRT1603
Product appearance 31mmx175mmx72mm
dimensions
Product weight About 77g (except battery)
Measuring range 34.0°C-43.0°C (93.2°F-109.4°
F)
Objecttemperature 0°C- 93.2°C (32°F-199.7°F)
Resolution ratio
0.1
°C/°F
Measurement
Location Laboratory
(35.0°C~ 42.0°
C)±0.2
°
C,
Accuracy (95.0°F~107.6°
F)
±0.4
°
F,
other
temperature±0.3°
C.
Operation 10.0°
C~40
.0°C (50.0°
F~
104.0°
F},
relative maximum humidity
temperature 15%
RH~93
%
RH
Atmospheric 70kPa~106kPa
pressure
Transportation/ -25°C~ 55°C
(-13
°F~131°
F}
,
relative maximum humidity
storage temperature 0%RH~93%RH
Atmospheric 50kPa~106kPa
pressure
Display screen LCD display screen, 4 bit
numbers and special icons.
When you turn
on
the
product
and ready
to
measure, a short
beep
will sound.
Sound The measurement is finished
with a long beep. System error
or
fault: three short beeps.
Fever alert: ten short beeps with
urgency.
Memory Records 9 temperature
measurements.
Automatically shut Device will turn off if
not
usedfor
down 30 seconds.
Battery 2 1.5V
AAA
alkaline batteries.
Period
of
use f:ive years
14
Clinical bias, Deb: 0.078
1603 Forehead mode Limits
of
Agreement, LA: 0.243
Clinical Repeatability, or: 0.069
The reference
body
site:
forehead
Measuring site Forehead
1.Thermometer
Included Parts 2.Instruction Manual
3.2
AAA
Batteries
APPENDIX
Guidance
and
manufacturer'sdeclaration-electromagneticemissions
The Model PG-IRT1603 Infrared Thermometeris intended
for
use
in
theelectromagnetic environmentspecified
below
.The customer
or
the
user
of
the Model PG-IRT1603 Infrared Thermometershouldassure
thatitis used in such
an
environment.
EMISSIONS COMPLIANCE ELECTROMAGNETIC
ENVIRONMENT-GUIDANCE
The Model
PG
-IRT1603
Infrared Thermometer
uses
RF
energy only
RF
emissions
for
its internal function.
CISPR
11
Group 1 Therefore, its
RF
emissions
arevery
low
and are
not
likelyto cause any
interferencein nearby
electronic equipment.
RF
emissions Class B
CISPR
11
Harmonic The Model PG-IRT1603
emissions IEC
N.A.
Infrared Thermometer
61000-3-2 isused in homeand it's
Voltage powered
by
DC
3V.
fluctuations/
N.A.
flicker emissions
IEC61000-3-3
15
Guidance
and
manufacturer's declaration-electromagneticimmunity
The Model PG-IRT1603 Infrared Thermometerisintended
for
use
in
the electromagnetic environmentspecified below. The
customer
or
the
user
of
theModel PG-IRT1603 Infrared Thermometershould assure
thatit is
used
in
such
an
environment.
IEC ELECTROMAGNETIC
IMMUNITY 60601 COMPLIANCE ENVIRONMENT-
TEST TEST LEVEL GUIDANCE
LEVEL
±8kV
Floors
should
be
wood,
contact
Electrostatic
±2kV,
±8
kV
contact
concrete
or
ceramictile.
discharge
±4kV,
±2
kV,
±4
kV,
Iffloors are coveredwith
(ESD)IEC
±8kV,
±8
kV,
±15KV syntheticmaterial, the
61000-4-2
±15KV
air relative
humidity
should
air
be
at
least
30
%.
Power Powerfrequency
magneticfields
frequency
30A/m, 30A/m,
should
be
at
levels
(50/60 Hz) 50/60Hz 50/60Hz characteristic
of
a typical
magneticfield location in a typical
IEC 61000-4-8 commercial
or
hospital
environment.
NOTE: Ur is
the
a.c. mainsvoltage prior
to
application
of
the
test
level
16
Guidance and manufacturer'sdeclaration-electromagnetic immunity
The
Model PG-IRT1603 Infrared Thermometeris intended for usein
the
electromagneticenvironmentspecified
below
. The customer
or
the
user
of
the
Model PG-IRT1603 InfraredThermometershould assure
that
it isused in
such
an
environment.
IEC
ELECTROMAGNETIC
IMMUNITY
60601
COMPLIANCE
ENVIRONMENT-
TEST
TEST
LEVEL GUIDANCE
LEVEL
3 Portable and mobile
Vrms150
RF
communications
kHz
to
equipmentshould
80
be
used
no
closer
Conducted
MHz6
to
any
part
of
the
RFIEC
Vrms N/A Model PG-IRT1603
61000-4-6 150 kHz Infrared Thermometer,
to
including cables,than
80MHz
the
recommended
outside separation distance
ISM calculated
from
the
bandsa
equation applicable
to
the
frequency
of
the
transmitter.
Recommended
separation distance
d=
[3
i1
]./P
d=
[
~f
I
.ff
80MHz-800MHz
d=
[
i,
I
.ff
800MHz•2.7GHz
Where P is
the
maximum
output
power
rating
of
thetransmitter
Radiated
10V
/m in watts (W) according
80MHZ
to
thetransmitter
RFIEC to
10V
/m manufacturer
and
d
61000-4-3 2.7 GHz is
the
recommended
separation distance
in metres(m). Field
strengthsfrom fixed
RF
transmitters, as
determined
by
an
electromagnetic site
survey,ashould
be
less
than the compliance
level in each
frequency rangeb
Interference
may
occur
in
the
vicinity
of
equipmentmarked with
the
following symbol:
((
<->
))
&
NOTE
1:
At
80
MHz
and 800 MHz,
the
higherfrequency range applies.
NOTE2: Theseguidelines may
not
applyin all situations.Electromagnetic
propagation is affected
by
absorption and reflection from structures,
objectsand people.
a
The
ISM (industrial, scientific and medical)
bands
between 0,15 MHz
and
80
MHz
are 6,765
MHz
to
6,795
MHz
; 13,553
MHz
to
13,567MHz;
26
,957 MHz
to
27
,283 MHz; and 40,66 MHz
to
40
,
70
MHz. The amateur
radio
bands
between0,15 MHzand
80
MHz
are 1,8
MHz
to
2,0
MHz
,
3,5 MHz
to
4,0 MHz, 5,3 MHz
to
5,4 MHz, 7 MHz
to
7,3 MHz, 10,1 MHz
to 10,15
MHz
,
14
MHz
to
14,2
MHz
, 18,07 MHz
to
18,17 MHZ,
21
,0
MHz
to 21,4 MHz, 24,89 MHz
to
24
,
99
MHz,
28
,0 MHz
to
29
,7
MHz
and
50
,0
MHz
to
54
,0 MHz.
17
b Thecompliance levels in the ISMfrequency bands between 150 kHz
and 80 MHz and in thefrequency range 80 MHz
to
2,7
GHz
are intended
to
decreasethe likelihoodthat mobile/portable communications
equipmentcould cause interference ifitis inadvertently
brought
into
patientareas. Forthis reason,an additional factor
of
10/3
has
been
incorporated intotheformula used in calculating the recommended
separation distance
for
transmitters in thesefrequency ranges.
c Field strengthsfrom fixed transmitters, such
as
base
stationsfor radio
(cellular/cordless) telephones and land mobile radios, amateurradio,
AM and
FM
radio broadcast
and
TV broadcastcannot be predicted
theoreticallywith accuracy.To assesstheelectromagneticenvironment
due
to
fixed RFtransmitters, an electromagnetic site survey should
beconsidered. Ifthe measuredfield strength inthe location in which
theModel PG-IRT1603 Infrared Thermometeris used exceeds
theapplicable RF compliance level above,the Model PG-IRT1603
Infrared Thermometershould be observed
to
verify normal operation.
Ifabnormal performance is observed, additional measures may
be
necessary, such as re-orienting
or
relocating the Model
PG
-IRT1603
Infrared Thermometer.
d Overthefrequency range 150 kHz
to
80
MHz,field strengths should
be lessthan 3 V/m.
RECOMMENDED SEPARATION DISTANCES BETWEEN
PORTABLE AND MOBILE RF COMMUNICATIONS EQUIPMENT
AND THE
MODEL
PG-IRT1603 INFRARED THERMOMETER
The Model PG-IRT1603 Infrared Thermometeris intended
for
use
in
anelectromagneticenvironmentin which radiated
RF
disturbances
arecontrolled.The customer
or
theuser
of
the Model PG-IRT1603
Infrared Thermometercan helppreventelectromagnetic interference
by
maintaining a minimumdistancebetween portable
and
mobileRF
communications equipment (transmitters)
and
theModel PG-IRT1603
Infrared Thermometeras recommended
below
,according
to
the
maximum outputpower
of
thecommunications equipment.
Rated Separation distanceaccording
to
frequency
of
transmitter
maximum m
output
of
150
kHz
to
80
MHz
80
MHz
to
800
MH
z 800MHzto2.
7GHz
transmitter d =
[3
.5]
Jp
d
=[3
.
5]Jp
d =[
!_
]
Jp
w V,
E,
E,
0.01
0.12 0.12 0.23
0.01
0.
38
0.
38
0.73
1 1.2 1.2 2.3
0.1 0.38 0.38
7.3
100 12 12 23
Fortransmitters rated
at
a maximum
output
powernotlisted abovethe
recommended separation distanced in metres (m) can beestimated
using the equation applicable
to
thefrequency
of
thetransmitter,
where P isthe maximum outputpowerrating
of
thetransmitter in watts
(W) according
to
thetransmitter manufacturer.
NOTE 1 At80 MHz
and
800
MHz,the separation distance
for
the
higherfrequency range applies.
NOTE 2These guidelines may not
apply
in all situations.
Electromagneticpropagation isaffected
by
absorptionand reflection
from structures, objects and people.
18
1-YEAR
WARRANTY
HoMedicssells its
products
with
the
intentthat
they
arefree
of
defects
in manufacture
and
workmanship
for
a period
of
one
year
from
the
date
of
original purchase, except
as
noted
below
.
HoMedics
warrants
that
its
products
will
be
free ofdefects in material
and
workmanship
under
normal
use
and
service.This warranty extends
only
to
consumers
and
does
not
extend
to
Retailers.
Toobtain warranty service
on
your
HoMedics
product
,
contact
a
Consumer
Relations Representative
by
telephone
for
assistance.
Please makesure
to
have
the
model
number
of
the
product
available.
HoMedics
does
notauthorize anyone, including,
but
not
limited
to
,
Retailers,
the
subsequent
consumer
purchaser
of
the
product
from a
Retailer
or
remote purchasers,
to
obligate
HoMedics
inany
way
beyond
the
terms setforth herein.
Thiswarranty
does
not
cover
damage
caused
by
misuse
or
abuse
;
accident;
the
attachment
of
anyunauthorized
accessory
; alteration
to
the
product;
improper
installation; unauthorized repairs
or
modifications;
improper
use
of
electrical/
power
supply; loss
of
power;
dropped
product
; malfunction
or
damage
of
an operating
part
from failure
to
provide manufacturer's
recommended
maintenance;
transportation damage; theft; neglect; vandalism;
or
environmental
conditions; loss of
use
duringthe period
the
product
is
at
a repair
facility
or
otherwise awaiting parts
or
repair;
or
any otherconditions
whatsoever
that
are beyond the control
of
Ho
Medics.This warranty is
effective
only
if
the
product
is
purchased
and
operated in
the
country in
which
the
product
is
purchased. A
product
that
requires modifications
or
adoption
to
enable it
to
operate in any
other
countrythan
the
country
for
which
itwas designed, manufactured,
approved
and/orauthorized,
or
repair
of
products
damaged
by
these modifications is
not
covered
under
thiswarranty.
THE WARRANTY PROVIDED HEREIN SHALLBETHE SOLE AND
EXCLUSIVE WARRANTY. THERESHALLBE
NO
OTHERWARRANTIES
EXPRESS OR IMPLIED INCLUDINGANY IMPLIEDWARRANTY OF
MERCHANTABILITYOR FITNESS OR ANYOTHER OBLIGATION
ON
THE PART OFTHECOMPANYWITH RESPECTTO PRODUCTS
COVERED BYTHISWARRANTY. HOMEDICS SHALLHAVE NO
LIABILITY FOR ANYINCIDENTAL, CONSEQUENTIALOR SPECIAL
DAMAGES. IN NO EVENTSHALLTHISWARRANTY REQUIRE MORE
THAN THE REPAIR OR REPLACEMENT
OF
ANYPART
OR
PARTS
WHICH ARE FOUNDTO BE DEFECTIVEWITHINTHE EFFECTIVE
PERIOD OFTHEWARRANTY.
NO
REFUNDSWILLBEGIVEN. IF
REPLACEMENT PARTS FOR DEFECTIVE MATERIALSARE NOT
AVAILABLE, HOMEDICS RESERVES THE RIGHTTO MAKE PRODUCT
SUBSTITUTIONS IN LIEU OFREPAIR OR REPLACEMENT.
This warranty
does
not
extend
to
the
purchase
of
opened, used,
repaired, repackaged
and
/
or
resealed products, including
but
not
limited
to
sale
of
such
products
on
internetauction sites
and/or
sales
of
such
products
by
surplus
or
bulk
resellers.
Any
and
all warranties
or
guaranteesshall immediately cease
and
terminate
as
to
any products
or
partsthereofwhich are repaired, replaced, altered,
or
modified, without
the
prior
express
and
written
consent
of
HoMedics. Thiswarranty
providesyou with specific legal rights. You
may
haveadditional
rightswhich
may
vary
from
state
to
state. Because
of
individual state
regulations,
some
of
the
abovelimitations and exclusions
may
not
apply
to
you.
For
more
information regarding
our
product
linein
the
USA, pleasevisit:
www.homedics.com
19
For questions
or
concerns, contact
HoMedics Consumer Relations:
Email: [email protected]
Phone: 1-800-466-3342
Hours: 8:30am-7pm
EST,
Monday-Friday
In
USA Distributed
by
:
HoMedics USA, LLC
3000 N Pontiac Trail
Commerce Township, Ml 48390
Made in China
-
Manufacturer:
Shenzhen Pango Electronic Co
.,
Ltd.
Main Site: No.25 1st IndustryZone, Fenghuang Road,
Xikeng Village, Henggang Town, Longgang District,
Shenzhen, Guangdong China
Additional site1: 2-4 Floor, No.5 Shanzhuang
Rd.
,Xikeng
Village, Henggang Town, Longgang District, Shenzhen City,
Guangdong Province, China
HoMedics isa registered trademark
of
HoMedics,
LLC.
©
2021
HoMedics, LLC. All rights reserved.
This
product
may
be covered
by
one or more patents.
Please visit www.HoMedics.
com
/patents.
CE
0191
20
Mo
del
: PG-IRT1603
P/N: TIE-
300
-WT, TIE-
300
-BK
IB
-TIE300
This manual suits for next models
2
Table of contents
Other HoMedics Thermometer manuals
HoMedics
HoMedics TI-150 User manual
HoMedics
HoMedics TO-R100-0GB User manual
HoMedics
HoMedics TU-100 User manual
HoMedics
HoMedics TE-200-EU User manual
HoMedics
HoMedics THERA P TO-R100 User manual
HoMedics
HoMedics TT-200 User manual
HoMedics
HoMedics JUMBO DISPLAY User manual
HoMedics
HoMedics TIE-210 User manual
HoMedics
HoMedics TO-R101 User manual
HoMedics
HoMedics THERA-P TE-120 User manual
