Homelite 19591A User manual

19591A
4-04
INSTRUCTION SHEET
GUTTER MAINTENANCE KIT
READ ALL SAFETY INSTRUCTIONS INYOUR OWNER'S MANUAL
KIT DOES NOT INCLUDE BLOWER
1. Make sure blower has been turned off. Remove all tube
attachments from the blower. (See illustration 1.)
REMOVE
2. Make sure adapter is free to rotate on the elbow. Loosen
clamp and install over exposed end of elbow. (See illustra-
tion 2.)
3. Attach above assembly (as shown in illustration 3) over
blower exhaust until elbow clamp groove matches blower
groove. Align assembly so adapter end points upward.
Tighten clamp screw.
4. Attach full elbow threaded joint onto straight tube. Continue
attachingstraighttubesuntilthepreferredlengthisacquired.
Make sure all joints are screwed tightly into position or the
blower may vibrate and push tubes apart. (See illustration
4.)
WEAR EYE PROTECTION!
ILLUSTRATION 1 ILLUSTRATION 2
ILLUSTRATION 3
UPPER ELBOW
SWIVEL ADAPTER
CLAMP
CLAMP SCREW
SWIVEL ADAPTER POINTS
UPWARD
For models:
HB180, HB180V, HB180VI, HB180VGK, HB290, HB290V, HB390, HB390V, HB390VI, Yard Sweeper, UT08929A, UT08930A,
UT08120, UT08931, UT08932, UT08934, Vac Attack II,Yard Broom II
STRAIGHT TUBE
(As required)
LARGE
CLAMP
UPPER
ELBOW
SWIVEL
ADAPTER
FULL
ELBOW
ILLUSTRATION 4

READ ALL SAFETY INSTRUCTIONS INYOUR OWNER'S MANUAL
STRAIGHTTUBE
(As required)
LARGE
CLAMP
UPPER
ELBOW
1. Make sure blower has been turned off. Remove all tube
attachments from the blower. (See illustration 1.)
3. Loosen clamp and place over exposed end of upper elbow.
Install swivel onto adapter. (See illustration 3.) Swivel
adapter must be free to rotate on the elbow.
2. Turn adapter clockwise to screw into blower housing until
tight. (See illustration 2.)
4. Attach full elbow threaded joint onto straight tube. Continue
attaching Straight Tubes until the preferred length is ac-
quired. Make sure all joints are screwed tightly into position
or the blower may vibrate and push tubes apart. (See illus-
tration 4.)
ILLUSTRATION 1 ILLUSTRATION 2
ILLUSTRATION 4
SWIVEL
ADAPTER
FULL
ELBOW
REMOVE
ADAPTER
KIT DOES NOT INCLUDE BLOWER
WEAR EYE PROTECTION!
ADAPTER
SWIVEL ADAPTER POINTS
UPWARD
ILLUSTRATION 3
UPPER
ELBOW
SWIVEL ADAPTER
CLAMP
ADAPTER
For models:
d25mhv, z25mhv, d30mha, d30mhv, i25mhv, i30mhv, BVM160, HB25150, HB30160, Vac Attack