Honeywell H7012A User manual

® U.S. Registered Trademark
Copyright © 2013 Honeywell Inc. All Rights Reserved MU1B-0543GE51 R0113A
D Montageanweisung H7012A HUMIDITY AND
H7012B HUMIDITY AND TEMPERATURE
ROOM SENSORS
Mounting Instructions
DK Installationsvejledning
ES Instrucciones de montaje
F Instructions d'installation
I Istruzioni di montaggio
N Installationsinstruktioner
NL Installatievoorschrift
P Instruções de montagem
S Installation instruktioner
FI Asennusohje
PL Instrukcja montażu
E Keep these instructions together with the device or with the
equipment documentation!
F Cette instruction est à conserver avec le contrôleur ou avec
la documentation de l'installation !
P Guarde estas instruςões junto do regulador ou junto da
documentaςão da instalaςão!
D Diese Anleitung ist beim Gerät oder in der Anlagen-
dokumentation aufzubewahren!
I Queste istruzioni devono essere conservate insieme al
lettore o con la documentazione dell´impianto!
S Denna instruktion skall förvaras tillsammans med regler
eller anläggningsdokumentationen!
DK Opbevar denne vejledning sammen med regler eller med
anlægsdokumentationen!
N Denne veiledningen skal oppbevares sammen med
regler eller anleggsdokumentasjonen!
FI Tätä ohjetta tulee säilyttää laitteen läheisyydessä tai
yhdessä muiden dokumenttien kanssa!
ES Conserve estas instrucciones con el recalar o con la
documentación de la instalación.
NL Deze handleiding moet bij de regelaar, of met de
documentatie van de installatie worden bewaard!
PL Instrukcjęobsługi należy przechowywaćprzy urządzeniu
albo w dokumentacji technicznej.
A. B. DISASSEMBLY / ASSEMBLY
CONTROLLER
MAX. 200 m (660 ft)
6 mm (1/4 in.)
MIN. 150 mm (6 in.)
Honeywell
1.5 ... 0.34 mm
2
(16 ... 22 AWG)
MAX. 0.5 Nm (4.4 lb-in.)

H7012A,B - MOUNTING INSTRUCTIONS
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative:
Automation and Control Solutions
Honeywell GmbH
Böblinger Strasse 17
71101 Schönaich / Germany
Phone: [phone] - 01
Fax: [phone] - 493
http://ecc.emea.honeywell.com
Subject to change without notice. Printed in Germany
MU1B-0543GE51 R0113A
C. POSITIONING D. DIMENSIONS
~1.3 m
Honeywell Honeywell
Honeywell
Honeywell
Honeywell
X
X
XX
80 (3.15”)
130 (5.12”)
34 (1.34”)
20
(0.79”)
E. TEMPLATE F. WIRING TERMINALS
107 (4-7/32”)
60 (2-3/8”)
30 (1-3/16”)
12
(7/16”)
60 (2-23/64”)
1
1
1
2
2
2
FIVE MOUNTING HOLES
WITH A DIAMETER OF
4 mm (0.16”) FOR THREE
(TWO) 3.5-mm (0.14”)
SCREWS MOUNTED
IN POSITIONS 1
(PREFERRED) OR 2.
H7012A,B CONTROLLER
COM
RH INPUT
TEMP. INPUT
24 VAC
nc nc nc
RH 0...10V
COM
H7012A1010: RH SENSOR 0...10 V
H7012B1008: RH SENSOR 0...10 V, TEMP. SENSOR PT1000
H7012B1024: RH SENSOR 0...10 V, TEMP. SENSOR NTC20k
H7012B1030: RH SENSOR 0...10 V, TEMP. SENSOR 0...10 V
LINE VOLTAGE LINE VOLTAGE
OPTIONAL
24 VAC
TEMP. 0...10 V
TEMP. - PT1000 or NTC20k
12345678910
!!