Honeywell CT50-HB User manual

CT50 HomeBase
Models CT50-HB, CT50-EB
Quick Start Guide
Rev C
3/19

Out of the Box
Make sure that your shipping box contains these items:
• CT50 HomeBase (CT50-HB) or Ethernet HomeBase (CT50-
EB)
• Power supply
•Powercord
• Quick start guide and regulatory compliance sheet
If any of these items are missing or appear damaged, contact
your Customer Account Representative. Keep the original pack-
aging in the event that you need to return the HomeBase or
Ethernet HomeBase for service or if you want to store the char-
ger while not in use..
Connect Power
Use only a UL Listed power supply which has been qualified by
Honeywell with an output rated at 12 VDC and 3 A. The power
supply input rating is 90-264 VAC, 50/60 Hz. The operating
temperature is -20 °C to 50 °C (-4 °F to 122 °F).
Caution: We recommend the use of Honeywell
accessories and power adapters. Use of any
non-Honeywell accessories or power
adapters may cause damage not covered
by the warranty.
Mise en garde : Il est recommandé d'utiliser les
périphériques, les cordons d'alimentation
et les adaptateurs secteur conçus par
Honeywell. L'utilisation de tout
périphérique, cordon d'alimentation ou
adaptateur secteur d'une autre marque est
susceptible de provoquer des dommages
non couverts par la garantie.

Ethernet
(CT50-EB)
USB Host
(CT50-EB)
DC Power
1. Plug the power cord into the power supply.
2. Plug the power supply cable into the power connector on
the back of the HomeBase.
3. Plug the power cord into a standard wall outlet.

Charge the Battery Pack
Insert a battery pack into the HomeBase:
Caution: Make sure that all components are dry
prior to using the computers and batteries
with accessories. Using wet components
may cause damage not covered by the
warranty.
Mise en garde : Assurez-vous que tous les
composants sont secs avant de connecter
les terminaux/batteries à des
périphériques. L'insertion de composants
humides risque de provoquer des
dommages non couverts par la garantie.

Ethernet LED
(CT50-EB)
Battery LED
Status LEDs
The HomeBase has one LED for the battery status. The Ethernet
Homebase has two status LEDs: Ethernet and battery.
LED Status Description
Ethernet Solid white CT50 is communicating with
HomeBase.
Blinking
White
CT50 is communicating with the
Ethernet network.
Off HomeBase not communicating
with Ethernet network or not
connected to power.

Mount the HomeBase
You can mount the HomeBase on a flat, horizontal surface such
as a desktop or workbench with an optional DIN rail.
Mounting hardware required:
•DINrail
• 3/16-inch diameter x 5.8-inch long pan head screw
• 1/2-inch OD x 7/32-inch ID x 3/64-inch thick washer
• 3/16-inch diameter nut
1. Slide the DIN rail into the slot on the bottom of the Home-
Base.
2. Secure the DIN rail to the flat surface with the hardware.
Battery Solid green The battery is connected to
external power and is fully
charged.
Solid amber The battery is connected to
external power and is charging.
Blinking red There is a battery charging fault,
such as over-temperature.
LED Status Description

Agency Information
USA
FCC Part 15 Subpart B Class B
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device pursuant to part 15 of the FCC Rules. These lim-
its are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
UL and C-UL Statement
UL and C-UL listed: UL 60950-1, Second
Edition and CSA C22.2 No.60950-1-07, Sec-
ond Edition.
Norme UL et C-UL
Homologué UL et C-UL : UL 60950-1,
seconde édition et CSA C22.2 No.60950-
1-07, seconde édition. If the following label is attached to your product, the product meets Korean agency approval for Class B equipment:󼓣󾖴󺮟󺮟󻀃󾖴󺥯󼖄󼐘 (B󺭸 ) 󼕳󼓿󽁻󼕰󽋘󺮟󺮟󻗋󻺋󾖴󼙫󻗋󾖴󺥯󼖄󼌿󻺋󾖴󻸛󼐘󽋇󻀃󾖴󺧲󼒳󾖴󻠘󼕰󼒫󻗋󾖴󽋇󻟟 , 󻠗󻉏󾖴󼜯󼍜󼌿󻺋󾖴󻸛󼐘󽋏󾖴󻾇󾖴󼓷󼀤󻀷󻁓 . RCM Mark
Complies with
ACMA regulatory
arrangements.
Customs Union
Approval Mexico
Conforms to NOM-019
Cumple con NOM-019
Está em conformidade com a NOM-019

• Consult the dealer or an experienced radio or television technician for
help.
If necessary, the user should consult the dealer or an experienced radio/
television technician for additional suggestions. The user may find the
following booklet helpful: “Something About Interference.” This is avail-
able at FCC local regional offices. Honeywell is not responsible for any
radio or television interference caused by unauthorized modifications of
this equipment or the substitution or attachment of connecting cables
and equipment other than those specified by Honeywell.
The correction is the responsibility of the user.
Use only shielded data cables with this system. This unit has been
tested with cables less than 3 meters. Cables greater than 3 meters may
not meet class B performance.
Caution: Any changes or modifications made to this equipment not
expressly approved by Honeywell may void the FCC authorization to
operate this equipment.
Canada
Industry Canada ICES-003
This Class B digital apparatus complies with Canadian ICES-003. Oper-
ation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Conformité à la règlementation canadienne
Cet appareil numérique de la Classe B est conforme à la norme NMB-
003 du Canada. Son fonctionnement est assujetti aux conditions suiva-
ntes :
1. Cet appareil ne doit pas causer de brouillage préjudiciable.
2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le
brouillage pouvant causer un fonctionnement indésirable.

Europe
The CE marking indicates compliance to 2004/108/EC EMC
Directive with Standards EN55022 CLASS B, EN55024,
EN61000-3-2, EN61000-3-3. 2011/65/EU ROHS (Recast). In
addition, complies to 2006/95/EC Low Voltage Directive, when
shipped with recommended power supply.
Honeywell International Inc. shall not be liable for use of our product
with equipment (i.e., power supplies, personal computers, etc.) that is
not CE marked and does not comply with the Low Voltage Directive.
Use only shielded data cables with this system. This unit has been
tested with cables less than 3 meters. Cables greater than 3 meters may
not meet class B performance.
Certified to CB Scheme IEC 60950-1, Second Edition.
Refer to www.honeywellaidc.com/environmental for the RoHS / REACH
/ WEEE information.
La marquage CE indique que cet appareil est conforme à la
Directive CEM 2004/108/CE et avec les normes EN55022
CLASSE B, EN55024, EN61000-3-2, EN61000-3-3. 2011/65/
EU ROHS (Recast). De plus, il est conforme à la Directive sur les
basses tensions 2006/95/EC, lorsqu’il est fourni avec le bloc
d’alimentation recommandé.
Honeywell ne sera pas tenu responsable de l’utilisation de ses produit
avec de l’équipement (c’est-à-dire, blocs d’alimentation, ordinateurs
personnels, etc.) qui ne porte pas la marque CE et n’est pas conforme à
la Directive sur les basses tensions.
Utiliser uniquement des câbles de données blindés avec ce système.
L’appareil a été testé avec des câbles de moins de 3 mètres. Les câbles
de longueur supérieure à 3 mètres peuvent ne pas satisfaire à la perfor-
mance de la classe B.
Certifié CB CEI 60950-1, deuxième édition.
Reportez-vous à la page www.honeywellaidc.com/environmental pour
obtenir des renseignements concernant les directives RoHS/REACH/
WEEE.
La marquage CE apposée sur ce dispositif atteste qu’il est con-
forme à la Directive CEM 2004/108/CE et aux normes
EN55022 CLASSE B, EN55024, EN61000-3-2, EN61000-3-3.

2011/65/EU ROHS (Recast). En outre, s’il est fourni avec l’alimentation
recommandée, ce dispositif est conforme à la Directive « basse tension
» 2006/95/CE.
Honeywell ne peut pas être tenu responsable des éventuelles
conséquences de l'utilisation de ses produits avec des équipements
(modules d'alimentation, ordinateurs personnels, etc.) ne comportant
pas la marque CE et non conformes à la Directive sur les basses ten-
sions.
Utilisez uniquement des câbles de données blindés avec ce système. Ce
dispositif a été testé avec des câbles de moins de 3 mètres. Il est possi-
ble que les câbles de plus de 3 mètres ne permettent pas d’atteindre des
performances de classe B.
Certifié selon la norme CEI 60950-1 seconde édition (schéma OC).
Reportez-vous au site www.honeywellaidc.com/environmental pour
obtenir les informations sur les directives RoHS/REACH/WEEE.
La marcatura CE indica conformità ai sensi della direttiva EMC
2004/108/EC con gli standard N55022 Classe B, EN55024,
EN61000-3-2, EN61000-3-3. 2011/65/EU ROHS (Recast). È
conforme inoltre ai sensi della Direttiva bassa tensione 2006/
95/EC se spedito con l’alimentatore consigliato.
Honeywell declina ogni responsabilità per l'utilizzo del prodotto con dis-
positivi (ad esempio alimentatori, personal computer ecc.) non con-
trassegnati dal marchio CE e non conformi alla Direttiva Bassa
Tensione.
Utilizzare solo cavi dati schermati con questo sistema. Questa unità è
stata testata con cavi di lunghezza inferiore a 3 metri. I cavi di lunghezza
superiore a 3 metri potrebbero non essere conformi alle prestazioni di
classe B.
Certificato in base allo Schema CB IEC 60950-1, seconda edizione.
Consultare il sito web www.honeywellaidc.com/environmental per infor-
mazioni su RoHS/REACH/RAEE.
Die CE-Kennzeichnung wird die Einhaltung der EMV-Richtlinie
2004/108/EG mit den Normen EN55022 Klasse B, EN55024,
EN61000-3-2, EN61000-3-3 angezeigt. 2011/65/EU ROHS
(Recast). Ferner entspricht dieses Gerät der Niederspannungs-
richtlinie 2006/95/EG, wenn es mit dem empfohlenen Netzteil geliefert
wird.

Honeywell haftet nicht für die Verwendung seiner Produkte mit Kompo-
nenten (z. B. Stromversorgungen, PCs usw.), die nicht mit dem CE-
Zeichen gekennzeichnet sind und die nicht den Vorschriften der Nieder-
spannungsrichtlinie entsprechen.
Für dieses System nur abgeschirmte Datenkabel verwenden. Dieses
System wurde mit Kabeln unter 3 Metern Länge geprüft. Kabel mit einer
Länge von über 3 Metern erfüllen möglicherweise nicht die Richtlinien
der Klasse B.
CB-zertifiziert gemäß IEC 60950, Second Edition.
Unter www.honeywellaidc.com/environmental finden Sie Informationen
über RoHS/REACH/WEEE.
El marcado CE indica que cumple con la Directiva 2004/108/
EC EMC y los estándares EN55022 Clase B, EN55024,
EN61000-3-2, EN61000-3-3. 2011/65/EU ROHS (Recast).
Además, cumple con la Directiva 2006/95/EC sobre el material
eléctrico destinado a utilizarse con determinados límites de tensión,
cuando se envía con una fuente de alimentación recomendada.
Honeywell no será responsable del uso de sus productos con equipos
(p. ej., fuentes de alimentación, ordenadores personales, etc.) que no
presenten la marca CE y no cumplan con la Directiva sobre el material
eléctrico destinado a utilizarse con determinados límites de tensión.
Utilice sólo cables de datos blindados con este sistema. Esta unidad se
ha probado con cables de longitud inferior a 3 metros. Cables superio-
res a 3 metros quizá no satisfagan los requisitos de rendimiento de la
clase B.
Se ha certificado que cumple el esquema CB IEC 60950-1, segunda
edición.
Consulte www.honeywellaidc.com/environmental para obtener infor-
mación sobre RoHS/REACH/WEEE.
El marcado CE indica que cumple con la Directiva 2004/108/
EC EMC con los Estándares EN55022 CLASE B, EN55024,
EN61000-3-2 y EN61000-3-3. 2011/65/EU ROHS (Recast).
Además, cumple con la Directiva 2006/95/EC sobre baja ten-
sión cuando se envía con la fuente de alimentación recomendada.
Honeywell no asumirá responsabilidad por el uso de sus productos con
equipos (p. ej., fuentes de alimentación, computadoras personales, etc.)
que no presenten la marca CE y no cumplan con la Directiva sobre baja
tensión.

Use únicamente cables protegidos para datos con este sistema. Esta
unidad ha sido evaluada con cables de menos de 3 metros. Es posible
que los cables de más de 3 metros no cumplan con el desempeño de
clase B.
Se ha certificado que cumple con el esquema CB IEC 60950-1, segunda
edición.
Consulte la información RoHS/REACH/WEEE en www.honey-
wellaidc.com/environmental.
A marcação CE indica conformidade com a Diretiva EMC 2004/
108/EC, com os Padrões EN55022 CLASSE B, EN55024,
EN61000-3-2 e EN61000-3-3. Além disso, indica conformi-
dade com a Diretiva para baixa tensão 2006/95/EC, quando o
dispositivo é enviado com a fonte de alimentação recomendada.
Honeywell não se responsabiliza pelo uso de nossos produtos com
equipamentos (fontes de alimentação, computadores pessoais, etc.)
que não estejam marcados com CE e em conformidade com a Diretriz
de Baixa Voltagem.
Use somente cabos de dados blindados com este sistema. Esta unidade
foi testada com cabos com menos de 3 metros. Cabos com mais de 3
metros não atendem o desempenho de classe B.
Certificação CB Scheme IEC 60950-1, Segunda edição.
Consulte a página www.honeywellaidc.com/environmental para obter
informações sobre as normas RoHS/REACH/WEEE.
CE 表示设备符合 2004/108/EC EMC 指令和 EN55022 B 类、EN55024、
EN61000-3-2、EN61000-3-3。2011/65/EU ROHS (Recast)。的标准要求。
此外，在随附建议的电源时，设备还符合 2006/95/EC 低电压指令的要求。
敳⺫󸶲󸳣蠳繢 CE 翹󸚖劀剴𢦏展呙靈宒睶县馲󸚤撈 󽘘敳󽘜靈謽ㄋ功厁󸚇󶙟纻𫖳󽘙咨霶痭及馲卟嵶󽘜Honeywell 剴󸢰叡呤󸢴叡ㄌ此系统仅能使用屏蔽数据电缆。此设备是以短于 3米的电缆进行的测试。长度超过 3 米
的电缆可能无法满足 B 级性能。 溹󸶲󸳣 CB 簯聧 IEC 60950-1 𦒍匱鉕馲󸚊󸚧ㄌ有关 RoHS / REACH / WEEE 信息，请参阅 www.honeywellaidc.com/environmental。

CE󴝇󸑀󱝠󸀮󴉆󸄅󶷉󶕹󱿷2004/108/EC EMC󳬙󱝣󾗚󸺟󳕦󴝇󴻬EN55022 CLASS
B󾗗EN55024󾗗EN61000-3-2󲃅EN61000-3-3󾗘2011/65/EU ROHS
(Recast)󾗘󷔑󴉆󴟆󶧪󹢂󳋀󳐫󸘟󱡋󵫞󵵙󹧗󴻣󸄅󶷉󾗚󱿻󴂹󱚔󶕹󱿷2006/95/EC󱟽󹧗󲟛󳬙󱝣󾗘󷔑󹀣󱿷󴉃󴝇󶆻CE󱾜󱘗󶕹󱿷󱟽󹧗󲟛󳬙󱝣󵵙󸎅󱨵󱼑󹧗󴻣󱡹󳤑󲏝󾗗󱤱󱜤󹧗󷇂󶖿󶖿󱡋󵫞󳦏󱤼󵵙󵫕󲄘󾗚Honeywell󴘭󱘗󸟟󸟲󾗘󴦞󶥛󶩂󱿌󷃬󱡋󵫞󱹌󸉝󵵙󸠜󳾓󱩥󸯳󶬢󾗘󴦞󸄅󶷉󴂞󱡋󵫞󱘗󱳭󱮸󲼐󹝡󵵙󹧗󶲽󸷯󸀅󴹁󸏲󾗘󸤥󸸶󱮸󲼐󹝡󵵙󹧗󶲽󱿔󷃬󵎣󴰢󸹉󱳭󶦚󸄅󶷉󳼋󷃬󾗘󶪅󸸶󸑃󸗏󶕹󱿷󴝇󴻬󶖈󱛔󵗾󾗘󸒿󱾏󹞸󱝤󵼸󸋲󸠜󸌾󾗘台灣 網頁限用物質含有情況資訊，請依下列步驟操作：
網頁連結：󹢔󵫞󵙀󸡗󲀰󴈅󳜶󴰄󸠜󸌾󸀮󴏵󴂞󱝤󵫕󲄘󲖸󷳌󲂱󱿾󵵙󾗚󳩋󱳭󲻊󳤑󵫕󲄘󲖸󷳌󵋡󹺘󵵙󸤥󸷏󶨂󾗚󲊓󳸚󱼑󱿔󱝤󳨈󹝻CE マーキングㅺㄋ󴉅󸃓󶷈ㅖ2004/108/EC EMC Directive ㅹ󸉪󴏴EN55022
CLASS BㄋEN55024ㄋEN61000-3-2ㄋEN61000-3-3. 2011/65/EU ROHS
有毒有害物质名称及含量的标识格式
(Names and Content of Hazardous Substances or Elements)
部件名称 (Parts Name) 有毒有害物质或元素
(Toxic and Hazardous Substances or Elements)
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr6+)
多溴联苯
(PBB)
多溴二苯
醚(PBDE)
印刷电路板 (PCB) ooo o o o
充电器 (Adapter) xooo o o
外壳 (Housing) ooo o o o
电源线 (Power Cord) xoo o o o
本表格依据 SJ/T11364-2014 的规定编制。 (The table is created by SJ/T11364-2014 requirement.)
o: 表示该有毒有害物质在该部件所有均质材料中的含量均在 GB/T26572-2011 标准规定的限量要求以下 (Indicates that
this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit
requirement in China’s GB/T26572-2011.)
x: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572-2011 标准规定的限量要求 (Indicates that
this toxic or hazardous substance contained in at least one of the homogeneous materials for this part is above the
limit requirement in China’s GB/T26572-2011.)

(Recast). ㅶ󴻫󳫠ㅡㅱㅎ㆗ㅝㅳ㆞󶆺ㅡㆉㅣㄌㆉㅪㄋ󳰠鱃󹧖󴻢緥ㅗㅲ蛭󷘻ㅟ㆘ㅱㅎ㆗颻貪ㅺㄋ2006/95/EC Low Voltage Directive ㅶㆍ󴻫󳫠ㅡㅱㅎㆉㅣㄌCE ㇹ㈗ㆷ㈎ㆺㅖㅵㅙㄋ Low Voltage Directive ㅶ󸹾貪ㅡㅵㅎ󴟄鋰 ( 󹧖󴻢󸃓󶷈ㄋ㇠㈗㇌㇙㈆ ㇂㈎㇣㈀㈗㇎ㅵㅴ) ㅳㅳㆍㅶ󳓓󶇂ㅹ󸅂嵶㆞咨霶ㅡㅪ颻貪ㄋHoneywell ㅺ簗蜏ㅹ󸟲叡㆞󸟟ㅎㆉㅦ㆟ㄌㅝㅹ㇆㇈㇕ㇻㅶㅺ㇆㈗㈆㇘緥ㅗ㇖㈗㇎㇀㈗ㇱ㈆ㅹㆊ㆞咨霶ㅡㅱㅙㅫㅟㅎㄌㅝㅹ󸃓󶷈ㅺ󹝠ㅟ3 m 璀簫ㅹ㇀㈗ㇱ㈆ㅲ㇕㇈㇗ㅟ㆘ㅱㅎㆉㅣㄌ 3 m 璀簪ㅹ㇀㈗ㇱ㈆ㅺㆹ㈄㇈Bㅹ󳘮󷃪㆞󴻌ㅪㅟㅵㅎ颻貪ㅖㅌ㆖ㆉㅣㄌCB Scheme IEC 60950-1, Second Editionㅶ󸑁𧏾ㅟ㆘ㅱㅎㆉㅣㄌRoHS / REACH / WEEE ㅶ󹞝ㅣ㆗󳜵颴ㅶㅯㅎㅱㅺㄋwww.honeywellaidc.com/environmental㆞譹󵐲ㅡㅱㅙㅫㅟㅎㄌ CE󾖴󽇋󼁋󻀃2004/108/EC EMC Directive󼓇󾖴󽇋󼙯󾖴EN55022 CLASS B, EN55024,
EN61000-3-2, EN61000-3-3. 2011/65/EU ROHS (Recast). 󼒳󾖴󼙯󻾇󽋗󼒳󾖴󼓇󻥧󽋘󻀷󻁓 . 󻍿󽋋 , 󺫻󼔔󻆇󻀃󾖴󼕳󼐿󾖴󺩤󺭸󼔔󼯇󼎯󾖴󽋗󺱇󾖴󼖋󺩤󻆇󻀃󾖴󺨬󼐟󼌿󻀃󾖴2006/95/EC
Low Voltage Directive 󻛫󾖴󼙯󻾇󽋗󼒳󾖴󼓇󻥧󽋘󻀷󻁓 . Honeywell󻀃󾖴Low Voltage Directive󼓇󾖴󼗟󽋜󼒳󾖴󼙯󻾇󽋇󼜯󾖴󼊹󺩏󾖴CE󾖴󺮟󽎧󻛫󾖴󽏼󻉌󽋇󼜯󾖴󼊹󼒯󾖴󼔔󻮳(󼍷: 󼕳󼐿󾖴󺩤󺭸󾖴󼔔󼯇, PC 󻉠)󼎯󾖴󽋗󺱇󾖴󻁨󻸛󾖴󼖋󽇷󼒳󾖴󻸛󼐘󽋗󼒫󻗋󼃗󾖴󻦋󻹌󽋇󻀃󾖴󼌣󻌏󽋋󾖴󻢧󼖋󼌿󻄳󾖴󼦴󼓳󼒳󾖴󼜯󼜯󾖴󼊹󼀤󻀷󻁓.이시스템에는 차폐된 데이터 케이블만 사용하십시오 . 본장치는 3 미터 미
만의 케이블로 테스트를 받았습니다 . 3 미터를 초과하는 케이블을 사용하면
Class B 성능을 만족시키지 못할 수있습니다 .
CB Scheme IEC 60950-1, Second Edition 󼓧󼜌󼒳󾖴󻦊󼋇󼀤󻀷󻁓.RoHS / REACH / WEEE 󼖄󻩣󻀃󾖴www.honeywellaidc.com/environmental󼌿󻺋󾖴󼦧󼗟󽋇󼁜󼁋󼎓.Маркировка СЕ означает соответствие Директиве по
электромагнитной совместимости 2004/108/EC со
стандартами EN55022 CLASS B, EN55024, EN61000-3-2,
EN61000-3-3. 2011/65/EU ROHS (Recast).Кроме того,
соответствие Директиве по низкому напряжению 2006/95/EC при
отправке с рекомендуемым источником питания.
Компания Honeywell не несет ответственность за использование
нашего товара с оборудованием (например, источниками питания,
персональными компьютерами) без маркировки СЕ, которое не
соответствует Директиве по низкому напряжению.
Используйте с этой системой только экранированные кабели
передачи данных. Это устройство прошло испытания с
использованием кабелей длиной менее 3 метров. Рабочие
характеристики кабелей длиной свыше 3 м могут не соответствовать
классу В.
Сертификация согласно схеме CB МЭК 60950-1, издание второе.

Информация о соответствии требованиям RoHS / REACH / WEEE
приведена на сайте www.honeywellaidc.com/environmental.
Support
To search our knowledge base for a solution or log into the Technical
Support portal and report a problem, go to
www.hsmcontactsupport.com.
Documentation
Product documentation is available at www.honeywellaidc.com.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and click
Resources > Warranty.
Patents
For patent information, see www.hsmpats.com.
Trademarks
Android and Google and other marks are trademarks of Google Inc.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes
in specifications and other information contained in this document
without prior notice, and the reader should in all cases consult HII to
determine whether any such changes have been made. The information
in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions con-
tained herein; nor for incidental or consequential damages resulting
from the furnishing, performance, or use of this material. HII disclaims
all responsibility for the selection and use of software and/or hardware
to achieve intended results.

This document contains proprietary information that is protected by
copyright. All rights are reserved. No part of this document may be pho-
tocopied, reproduced, or translated into another language without the
prior written consent of HII.
Copyright © 2015-2019 Honeywell International Inc. All rights reserved.