Honeywell 301C User manual

Centrale
Controller
Manuel de l’utilisateur
301C
User Manual
ERP 510324
4/07

Controller Unit
301C
User Manual
ERP 510324
4/07

510324 301C User Manual iii
4/07 Honeywell
Notices and Trademarks
Copyright by Honeywell International Inc.
Release 510324 April 2007
While this information is presented in good faith and believed to be accurate,
Honeywell disclaims the implied warranties of merchantability for a particular
purpose and makes no express warranties except as may be stated in its
written agreement with and for its customers.
In no event is Honeywell liable to anyone for any indirect, special or
consequential damages. The information and specifications in this document
are subject to change without notice.
Honeywell Analytics
4005 Matte Blvd, Unit G
Brossard, Quebec, J4Y 2P4

510324 301C User Manual v
4/07 Honeywell
Contacts
World Wide Web
The following Honeywell Websites may be of interest to our customers:
Telephone
Contact us by telephone at the numbers listed below:
Sales Informations
Contact us at [e-mail]
Honeywell Organization WWW Address (URL)
Honeywell Analytics http://www.honeywellanalytics.com
Corporate http://www.honeywell.com
International http://content.honeywell.com/global/
Organization Phone Number
United States
and Canada Honeywell Analytics
1-800-563-2967
1-450-619-2450
Fax: [phone]
Asia Pacific Honeywell Asia Pacific Inc.
Hong Kong (852) 23 31 9133
Europe Honeywell Pace
Brussels, Belgium [32-2]728-2711
Latin America Honeywell International Inc.
Sunrise, Florida, U.S.A. [phone]

510324 301C User Manual vii
4/07 Honeywell
Symbol Definitions
The following table lists the symbols used in this document to denote
certain conditions:
Symbol Definition
ATTENTION: Identifies information that requires
special consideration
TIP: Identifies advice or hints for the user, often
in terms of performing a task
REFERENCE _ INTERNAL: Identifies an
additional source of information within the
bookset.
CAUTION
Indicates a situation which, if not avoided, may
result in equipment or work (data) on the system
being damaged or lost, or may result in the
inability to properly operate the process.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor
or moderate injury. It may also be used to alert
against unsafe practices.
CAUTION: Symbol on the equipment refers the
user to the product manual for additional
information. The symbol appears next to required
information in the manual.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in
serious injury or death.
WARNING symbol on the equipment refers the
user to the product manual for additional
information. The symbol appears next to required
information in the manual.